The ESP32-CANBus modules by Copperhill Technologies, with their integration of WiFi, Bluetooth, and Bluetooth LE, allow a wide range of employment, including industrial, automotive, maritime, and Internet of Things (IoT) applications. The ESP32 series of modules support an extended operating temperature range of -40°C to 85°C and are suitable for commercial application development.
GREENFIELD, Mass. - May 4, 2021 - PRLog -- The ESP32 is a series of low-cost, low-power system-on-chip microcontrollers with integrated WiFi and dual-mode Bluetooth. The ESP32 series employs a Tensilica Xtensa LX6 microprocessor in both dual-core and single-core variations and includes built-in antenna switches and an RF balun power amplifier, low-noise receive amplifier, filters, and power management modules.
The ESP32 WiFi, Bluetooth Classic, BLE, CAN Bus Module comes with an onboard ESP32 WROOM-32 WiFi, Bluetooth Classic, BLE Module, and a CAN Bus port with a transceiver. Onboard is an RGB LED, IO pins on a 0.1" pad.
Features
- 240 MHz dual-core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 512 KB SRAM
- Integrated 802.11b/g/n HT40 WiFi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- 4 MByte flash included in the WROOM32 module
- Onboard PCB antenna
- Programming via USB-C connector
- CAN Bus transceiver
- SPI, IIC, I2S, UART ports accessible through onboard connections
- ADC, DAC channels accessible through onboard connections
- External power supply range of 4.5VDC to 46 VDC (nominal: 12 VDC) with reverse polarity protection
- Extended operating temperature range of -40C to +85C
Also built-in is an RGB LED plus a 3.5" capacitive touch screen controlled via SPI bus.
The programming is achieved through the USB-to-Serial converter with a USB-C connector, automatic bootloader, and reset.
The board can be powered by the USB port or via an external 7 to 24 VDC supported by the onboard SMPS supply.
Features
- 240 MHz dual-core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
- Onboard PCB antenna
- Programming via USB-C connector
- CAN Bus transceiver
- 480x320 3.5" capacitive touch screen
- RGB LED
- Power by USB or external 7 to 24 VDC with onboard SMPS supply
Copperhill Technologies Corporation's focus is on the development and sales of embedded systems for Controller Area Network, SAE J1939, and NMEA 2000. Copperhill Technologies is a member of SAE (Society of Automotive Engineers) and NMEA.
Contact
Wilfried Voss
***@copperhillmedia.com
4132132500
Photos: (Click photo to enlarge)
Read Full Story - Internet of Things (IoT) Gateway Converts CAN Bus Data to WiFi, Bluetooth, BLE | More news from this source
Press release distribution by PRLog