Skip to main content

“Film Galvanising System Now Global”

ZINGA  containing 96% pure Zinc offers full cathodic protection to steel. Ideal also for the refurbishment of existing steel on site.

ZINGA comes in several can sizes and also handy aerosols for touch ups.

Steel sections that are too big to fit into regular hot dip galvanising tanks can be easily galvanised to the highest standards on site in most environments.

The example shown refers to a very large steel section, too large to fit in regular galvanising tank, galvanised on site.

The toughest test for any anti-corrosion coating is when the steel is subjected to continuous exposure to sea water and salt spray. The image shows a small section of a large number of steel piles in tidal conditions. The ZINGA was applied to the steel pi

One of the most extreme environments for steel corrosion is sea water. ZINGA protects over 200 immersed steel piles at Killybegs harbour in Ireland

Cathodic & Passive Protection Significantly Extends Life Of Exposed Steel In Most Extreme Conditions.

A big benefit that the ZINGA galvanising system is that saves a lot of time as it can be applied in-house at the steel fabrication facilities”
— Brendan C Igoe
DUBLIN, IRELAND, March 29, 2022 / -- With over four decades of experience in over 80 countries on every continent and used in the most extreme conditions, the ZINGA Film Galvanising System is now recognised as a proven galvanising system with total acceptance by engineers, architects and the coatings industries.

Brendan C Igoe, CEO of Igoe International Ltd, ZINGA distributors said “In recent years we have seen an enormous growth in demand for this galvanising system due to several reasons. For example: ZINGA can be used to galvanise metals that are on the one hand – sections too large to fit into the regular HDG galvanising tanks and pieces too thin that are liable to warp in the 450°C HDG process.

It can be applied on site in most conditions by spray, (including Electrostatic) brush or roller. Venting holes not necessary on hollow sections.

Being 96% pure zinc, (not paint) ZINGA performs similar to traditional HDG galvanising by offering both Cathodic and Passive protection. It can be over painted by most industrial two pack paints or powder coating. Can be welded on, remains flexible on the metal – will not peel or crack, even during metal forming/rolling.”

The system is accepted and used world-wide on hundreds of huge projects ranging from offshore oil and gas platforms, steel piles immersed in the sea, power stations, bridges, power pylons, railway lines, shipping, trawlers, road signs, wind turbines, structural steel fabrication, oil fields, power generating dam turbines, lighting masts, sub-sea pipe clamps, silos, water (including potable) fuel tanks, transformers, vehicle and machinery maintenance etc.

Mr Igoe added “Another big benefit that ZINGA offers is that saves a lot of time as it can be applied in-house at the fabrication facilities. Significant additional savings are achieved in both time and transportation of steel to and from HDG facilities. ZINGA is ideal as a refurb system on shot blasted steel adding decades of extra life to the steel.

Zinga is used globally as a top up for old HDG which is nearing the end of its life cycle. Most important for engineers and specifiers is the fact that ZINGA has all the required testing and certifications including C5-M Very high Marine, C5-I Very high industrial, Norsok M-501, C1 to C5M, IM1 to IM3.”

For more information on the Zinga Film Galvanising System, go to: See World-wide References.
ZINGA is distributed in Rep of Ireland and N Ireland by Igoe International Ltd, Dublin. Tel +353 1 830 22 50

Brendan Igoe
Igoe International Ltd
+353 87 245 6078
email us here

ZINGA Film Galvanising System

Data & News supplied by
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.