Form 10-Q
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

x    Quarterly Report Pursuant to Section 13 or 15(d)

of the Securities Exchange Act of 1934

For the Quarterly Period Ended November 30, 2009

Or

¨    Transition Report Pursuant to Section 13 or 15(d)

of the Securities Exchange Act of 1934

For the Transition Period from              to             

Commission file number 0-22496

SCHNITZER STEEL INDUSTRIES, INC.

(Exact name of registrant as specified in its charter)

 

OREGON    93-0341923

(State or other jurisdiction of

incorporation or organization)

  

(I.R.S. Employer

Identification No.)

3200 NW Yeon Ave.

Portland, OR

   97210
(Address of principal executive offices)    (Zip Code)

(503) 224-9900

(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes  ¨    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (check one)

Large accelerated filer  x        Accelerated filer  ¨        Non-accelerated filer  ¨        Smaller Reporting company  ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes  ¨    No  x

The Registrant had 22,199,706 shares of Class A common stock, par value of $1.00 per share, and 5,566,159 shares of Class B Common Stock, par value of $1.00 per share, outstanding at December 30, 2009.

 

 

 


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

INDEX

 

     PAGE

PART I. FINANCIAL INFORMATION

  

Item 1. Financial Statements (unaudited)

  

Condensed Consolidated Balance Sheets as of November 30, 2009 and August 31, 2009

   3

Condensed Consolidated Statements of Operations for the Three Months Ended November 30, 2009 and 2008

   4

Condensed Consolidated Statements of Cash Flows for the Three Months Ended November 30, 2009 and 2008

   5

Notes to Unaudited Condensed Consolidated Financial Statements

   6

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

   20

Item 3. Quantitative and Qualitative Disclosures about Market Risk

   31

Item 4. Controls and Procedures

   31

PART II. OTHER INFORMATION

  

Item 1. Legal Proceedings

   32

Item 1A. Risk Factors

   32

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

   32

Item 3. Defaults Upon Senior Securities

   32

Item 4. Submission of Matters to a Vote of Security Holders

   32

Item 5. Other Information

   32

Item 6. Exhibits

   32

SIGNATURES

   33

 

2


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

CONDENSED CONSOLIDATED BALANCE SHEETS

(Unaudited, in thousands, except per share amounts)

 

     November 30, 2009     August 31, 2009  
Assets     

Current assets:

    

Cash and cash equivalents

   $ 19,981      $ 41,026   

Accounts receivable, net

     122,397        117,666   

Inventories, net

     242,969        184,455   

Deferred income taxes

     7,672        10,027   

Refundable income taxes

     48,998        46,972   

Prepaid expenses and other current assets

     7,616        10,868   
                

Total current assets

     449,633        411,014   

Property, plant and equipment, net

     431,067        447,228   

Other assets:

    

Investment in and advances to joint venture partnerships

     11,118        10,812   

Goodwill

     368,241        366,559   

Intangibles, net

     23,675        20,422   

Other assets

     12,141        12,198   
                

Total assets

   $ 1,295,875      $ 1,268,233   
                
Liabilities and Equity     

Current liabilities:

    

Short-term borrowings and capital lease obligations

   $ 24,990      $ 1,317   

Accounts payable

     59,829        72,289   

Accrued payroll and related liabilities

     15,520        23,636   

Environmental liabilities

     2,995        3,148   

Accrued income taxes

     1,214        776   

Other accrued liabilities

     35,101        38,963   
                

Total current liabilities

     139,649        140,129   

Deferred income taxes

     47,294        44,523   

Long-term debt and capital lease obligations, net of current maturities

     144,798        110,414   

Environmental liabilities, net of current portion

     38,760        38,760   

Other long-term liabilities

     9,684        11,657   

Commitments and contingencies (Note 7)

    

Schnitzer Steel Industries, Inc. (“SSI”) shareholders’ equity:

    

Preferred stock–20,000 shares authorized, none issued

     —          —     

Class A common stock–75,000 shares $1.00 par value authorized, 22,171 and 21,402 shares issued and outstanding

     22,171        21,402   

Class B common stock–25,000 shares $1.00 par value authorized, 5,595 and 6,268 shares issued and outstanding

     5,595        6,268   

Additional paid-in capital

     733        —     

Retained earnings

     885,202        894,243   

Accumulated other comprehensive loss

     (1,799     (2,546
                

Total SSI shareholders’ equity

     911,902        919,367   

Noncontrolling interests

     3,788        3,383   
                

Total equity

     915,690        922,750   
                

Total liabilities and equity

   $ 1,295,875      $ 1,268,233   
                

The accompanying notes to the unaudited condensed consolidated financial statements

are an integral part of these statements.

 

3


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(Unaudited, in thousands, except per share amounts)

 

     Three Months Ended November 30,  
     2009     2008  

Revenues

   $ 394,282      $ 471,964   

Operating expense:

    

Cost of goods sold

     350,938        490,554   

Selling, general and administrative

     34,446        37,484   

Environmental matters

     150        (5,613

Income from joint ventures

     (534     (2,256
                

Operating income (loss)

     9,282        (48,205

Other income (expense):

    

Interest expense

     (618     (1,354

Other income, net

     419        277   
                

Total other expense

     (199     (1,077
                

Income (loss) from continuing operations before income taxes

     9,083        (49,282

Income tax (expense) benefit

     (1,864     16,322   
                

Income (loss) from continuing operations

     7,219        (32,960

Loss from discontinued operations, net of tax

     (14,974     (1,430
                

Net loss

     (7,755     (34,390

Net (income) loss attributable to noncontrolling interests

     (814     388   
                

Net loss attributable to SSI

   $ (8,569   $ (34,002
                

Basic:

    

Income (loss) per share from continuing operations attributable to SSI

   $ 0.23      $ (1.16

Loss per share from discontinued operations attributable to SSI

     (0.54     (0.05
                

Net loss per share attributable to SSI

   $ (0.31   $ (1.21
                

Diluted:

    

Income (loss) per share from continuing operations attributable to SSI

   $ 0.23      $ (1.16

Loss per share from discontinued operations attributable to SSI

     (0.53     (0.05
                

Net loss per share attributable to SSI

   $ (0.30   $ (1.21
                

Weighted average number of common shares:

    

Basic

     27,803        28,016   

Diluted

     28,130        28,016   

Dividends declared per common share

   $ 0.17      $ 0.17   

The accompanying notes to the unaudited condensed consolidated financial statements

are an integral part of these statements.

 

4


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(Unaudited, in thousands)

 

     Three Months Ended November 30,  
     2009     2008  

Cash flows from operating activities:

    

Net loss

   $ (7,755   $ (34,390

Noncash items included in net loss:

    

Depreciation and amortization

     15,327        14,531   

Inventory write-down

     368        51,968   

Deferred income taxes

     1,009        (25,897

Undistributed equity in earnings of joint ventures

     (483     (1,685

Share-based compensation expense

     2,731        4,379   

Excess tax (benefits) deficiencies from share-based payment arrangements

     (16     130   

(Gain) loss on disposal of a business and other assets

     17,103        (502

Environmental matters

     150        (2,376

Voluntary incentive award forfeitures

     —          (5,504

Unrealized (gain) loss on derivatives

     (1,586     2,135   

Changes in assets and liabilities:

    

Accounts receivable

     (9,138     205,803   

Inventories

     (90,734     48,004   

Refundable income taxes

     (1,946     —     

Prepaid expenses and other current assets

     1,844        3,969   

Intangibles and other long term assets

     (2     34   

Accounts payable

     (11,259     (90,591

Accrued payroll liabilities

     (6,616     (40,491

Other accrued liabilities

     883        (9,086

Accrued income taxes

     401        (40,665

Environmental liabilities

     (303     (471

Other long-term liabilities

     7        (233

Distributed equity in earnings of joint ventures

     —          300   
                

Net cash provided by (used in) operating activities

     (90,015     79,362   
                

Cash flows from investing activities:

    

Capital expenditures

     (8,249     (28,244

Acquisitions, net of cash acquired

     (18,126     —     

(Advances to) payments from joint ventures, net

     177        (832

Proceeds from sale of business and other assets

     41,083        773   
                

Net cash provided by (used in) investing activities

     14,885        (28,303
                

Cash flows from financing activities:

    

Proceeds from line of credit

     112,500        63,500   

Repayment of line of credit

     (89,000     (63,500

Borrowings from long-term debt

     190,500        165,017   

Repayment of long-term debt

     (157,273     (218,198

Stock withheld for taxes under employee share-based compensation plan

     (2,361     (1,608

Excess tax benefits (deficiencies) from share-based payment arrangements

     16        (130

Stock options exercised

     443        —     

Distributions to noncontrolling interests

     (409     —     

Dividends declared and paid

     (472     (479
                

Net cash provided by (used in) financing activities

     53,944        (55,398
                

Effect of exchange rate changes on cash

     141        (661
                

Net decrease in cash and cash equivalents

     (21,045     (5,000

Cash and cash equivalents at beginning of period

     41,026        15,039   
                

Cash and cash equivalents at end of period

   $ 19,981      $ 10,039   
                

SUPPLEMENTAL DISCLOSURES:

    

Cash paid during the period for:

    

Interest

   $ 219      $ 1,404   

Income taxes, net of refunds received

   $ 6      $ 49,544   

The accompanying notes to the unaudited condensed consolidated financial statements

are an integral part of these statements.

 

5


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

Note 1 - Summary of Significant Accounting Policies

Basis of Presentation

The accompanying unaudited condensed consolidated financial statements of Schnitzer Steel Industries, Inc. (the “Company”) have been prepared pursuant to generally accepted accounting principles in the United States of America (“U.S. GAAP”) for interim financial information and the rules and regulations of the United States Securities and Exchange Commission (“SEC”) for Form 10-Q, including Article 10 of Regulation S-X. The year-end condensed consolidated balance sheet was derived from audited financial statements, but does not include all disclosures required by U.S. GAAP for annual financial statements. Certain information and note disclosures normally included in annual financial statements have been condensed or omitted pursuant to those rules and regulations. In the opinion of management, all normal, recurring adjustments considered necessary for a fair presentation have been included. Although management believes the disclosures made are adequate to ensure the information presented is not misleading, management suggests that these unaudited condensed consolidated financial statements be read in conjunction with the financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the fiscal year ended August 31, 2009. The results for the three months ended November 30, 2009 and 2008 are not necessarily indicative of the results of operations for the entire year. The Company has evaluated subsequent events through January 7, 2010. There were no subsequent events requiring disclosure.

Cash and Cash Equivalents

Cash and cash equivalents include short-term securities that are not restricted by third parties and have an original maturity date of 90 days or less. Included in accounts payable are book overdrafts of $15 million and $23 million as of November 30, 2009 and August 31, 2009, respectively.

Accounts Receivable, net

Accounts receivable represent amounts due from customers on product and other sales. The allowance for doubtful accounts was $6 million at November 30, 2009 and $8 million at August 31, 2009.

Goodwill and Other Intangible Assets, net

On October 2, 2009, the Company entered into a definitive agreement to sell the Company’s full-service used auto parts operation, which had been operated as part of the Auto Parts Business (“APB”) reporting unit. The Company identified this divestiture as a triggering event, which resulted in testing goodwill for impairment. Based on the Company’s valuation analysis performed in relation to the divestiture of the full-service operations, the Company determined that the goodwill related to the APB reporting unit was not impaired. The Company will continue to monitor its goodwill and indefinite-lived intangible and long-lived assets for possible future impairment. Refer to Note 6 – Goodwill and Intangibles, net for further detail.

On September 1, 2009, the Company adopted the accounting standard for non-recurring, non-financial assets and liabilities that are recognized or disclosed at fair value in the financial statements on a non-recurring basis. Non-recurring, non-financial asset fair value measurements include those used in the Company’s test of recoverability of goodwill and indefinite-lived intangible assets, in which the Company determines whether fair values of its applicable reporting units exceed their carrying values. This standard will also impact the accounting for business combinations by using an exit price model when determining the fair values of acquired assets and assumed liabilities.

Accrued Workers’ Compensation Costs

The Company is self-insured up to a maximum amount for workers’ compensation claims and as such, a reserve for the costs of unpaid claims and the estimated costs of incurred but not reported claims has been estimated as of the balance sheet date. The Company’s exposure to claims is protected by various stop-loss insurance policies. The estimate of this reserve is based on historical claims experience. At November 30, 2009 and August 31, 2009, the Company accrued $6 million for the estimated cost of workers’ compensation claims.

 

6


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Changes in Shareholders’ Equity and Comprehensive Income (Loss)

The following is a summary of the changes in shareholders’ equity and comprehensive income (loss) (in thousands):

 

     2009     2008  
     SSI shareholders’
equity
    Noncontrolling
interests
    Total equity     SSI shareholders’
equity
    Noncontrolling
interests
    Total equity  

Balances - September 1,

   $ 919,367      $ 3,383      $ 922,750      $ 978,152      $ 4,399      $ 982,551   

Net income (loss)

     (8,569     814        (7,755     (34,002     (388     (34,390

Components of other comprehensive income (loss), net of tax:

            

Foreign currency translation

     572        —          572        (2,243     —          (2,243

Net unrealized gain (loss) on cash-flow hedges

     175        —          175        (233     —          (233
                                                

Comprehensive income (loss)

     (7,822     814        (7,008     (36,478     (388     (36,866

Distributions to noncontrolling interests

     —          (409     (409     —          —          —     

Stock withheld for taxes under employee share-based compensation plan

     (2,361     —          (2,361     (1,608     —          (1,608

Share-based compensation expense

     2,731        —          2,731        4,379        —          4,379   

Dividends declared and paid

     (472     —          (472     (479     —          (479

Stock options exercised

     443        —          443        —          —          —     

Excess tax benefits (deficiencies) from share-based payment arrangements

     16        —          16        (130     —          (130
                                                

Balances - November 30,

   $ 911,902      $ 3,788      $ 915,690      $ 943,836      $ 4,011      $ 947,847   
                                                

Net Income (Loss) and Dividends per Share

Effective September 1, 2009, the Company adopted the accounting standard for noncontrolling interests in consolidated financial statements. Certain provisions of this accounting standard are required to be adopted retrospectively for all periods presented and include a requirement that the carrying value of noncontrolling interests (previously referred to as minority interests) be removed from the mezzanine section of the balance sheet and reclassified as equity. Further, as a result of adopting this accounting standard, net (income) loss attributable to noncontrolling interests is now deducted from the income (loss) from continuing operations to arrive at the net income (loss) from continuing operations attributable to SSI for purposes of calculating earnings per share (“EPS”).

Basic net income (loss) per share attributable to SSI is based on the weighted average number of outstanding common shares during the periods presented, including vested deferred stock units (“DSUs”) and restricted stock units (“RSUs”). Diluted net income per share attributable to SSI is based on the weighted average number of common shares outstanding, assuming dilution. Potentially dilutive common shares include the assumed exercise of stock options and assumed vesting of performance share, DSU and RSU awards using the treasury stock method. For the three months ended November 30, 2009 and 2008, 179,578 and 1,340,913 common stock equivalent shares, respectively, were considered anti-dilutive and were excluded from the calculation of diluted earnings per share.

 

     Three Months Ended November 30,  
     2009     2008  

Income (loss) from continuing operations

   $ 7,219      $ (32,960

Net (income) loss attributable to noncontrolling interests

     (814     388   
                

Income (loss) from continuing operations attributable to SSI

     6,405        (32,572

Loss from discontinued operations, net of tax

     (14,974     (1,430
                

Net loss attributable to SSI

   $ (8,569   $ (34,002
                

Computation of shares:

    

Weighted average common shares outstanding - basic

     27,803        28,016   

Incremental common shares attributable to dilutive stock options, performance share awards, DSUs and RSUs

     327        —     
                

Weighted average common shares outstanding - diluted

     28,130        28,016   
                

 

7


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Recent Accounting Pronouncements

In December 2008, a new accounting standard was issued regarding an employer’s disclosures about the plan assets of a defined benefit pension or postretirement plan and will require additional disclosure regarding investment policies and strategies, fair value of each major asset category based on risks of the assets, inputs and valuations techniques used to estimate fair value, fair value measurement hierarchy levels under pension accounting for each asset category and significant concentration of risk information. This standard will be effective for the Company for the fiscal year ending August 31, 2010.

Reclassifications and Revisions

Certain prior year amounts have been reclassified within cash flows from operating activities to conform to the current year presentation. These changes had no impact on previously reported operating income, net income (loss) or net cash provided by operating activities.

In addition, the Company identified and corrected a classification error in the consolidated statement of cash flows for the discrete quarter ended November 30, 2008 which increased net cash provided by operating activities by $9 million to $79 million and increased net cash used in investing activities by $9 million to $28 million. The Company deemed this error to be immaterial.

Note 2 - Inventories, net

The Company’s inventories primarily consist of ferrous and nonferrous processed and unprocessed scrap metal, used and salvaged vehicles and finished steel products, consisting primarily of rebar, merchant bar and wire rod. Inventories are stated at the lower of cost or market for all periods presented.

Inventories, net consisted of the following (in thousands):

 

     November 30, 2009     August 31, 2009  

Processed and unprocessed scrap metal

   $ 169,558      $ 77,607   

Semi-finished goods (billets)

     3,864        9,600   

Finished goods

     39,103        66,936   

Supplies

     31,291        31,581   

Inventory reserve

     (847     (1,269
                

Inventories, net

   $ 242,969      $ 184,455   
                

The Company makes certain assumptions regarding future demand and net realizable value in order to assess that inventory is properly recorded at the lower of cost or market. The assumptions are based on both historical experience and current information.

Due to reduced production levels during the first three months of fiscal 2009, the Company recognized $10 million of expense for abnormal production costs that could not be capitalized into inventory.

Note 3 - Property, Plant and Equipment, net

Property, plant and equipment, net consisted of the following (in thousands):

 

     November 30, 2009     August 31, 2009  

Property, plant and equipment

   $ 803,165      $ 812,997   

Less: accumulated depreciation

     (372,098     (365,769
                

Property, plant and equipment, net

   $ 431,067      $ 447,228   
                

 

8


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Note 4 - Business Combinations

On September 1, 2009, the Company adopted the revised accounting standard for business combinations. This standard requires the Company to recognize the assets acquired, the liabilities assumed, and any noncontrolling interest in the acquiree at the acquisition date, measured at their fair values as of that date, and requires acquisition costs to be expensed as incurred. The Company expensed $1 million in acquisition costs to selling, general and administrative expenses in the first quarter of fiscal 2010.

In October 2009, the Company completed the acquisition of four self-service used auto parts facilities located near the Company’s MRB export facility in Portland, Oregon for $18 million. This acquisition represents the Company’s first used auto parts operations in the Pacific Northwest. The acquired facilities will operate under the Company’s Pick-N-Pull brand. This acquisition was not material to the Company’s financial position or results of operations, and thus proforma information is not presented.

Note 5 - Discontinued Operations

In October 2009, the Company sold its full-service used auto parts operation, which had been operated as part of the APB reporting unit. The Company concluded that the divestiture met the definition of a discontinued operation. Accordingly, the results of this discontinued operation have been reclassified for all periods presented. The sale resulted in a loss of $15 million, net of tax. The loss included the write-off of $12 million of goodwill that was allocated to the full-service operation from the APB reporting segment. Operating results of the discontinued operations are summarized below. The amounts exclude general corporate overhead previously allocated to the full-service used auto parts operation.

 

     Three Months Ended November 30,  

(In thousands)

   2009     2008  

Revenues

   $ 9,991      $ 27,152   
                

Loss from discontinued operations before income taxes

   $ (292   $ (2,200

Loss on sale of full service operations

     (17,022     —     

Income taxes

     2,340        770   
                

Loss from discontinued operations, net of tax

   $ (14,974   $ (1,430
                

Assets and liabilities of discontinued operations consisted of the following (in thousands):

 

     August 31, 2009

Current assets

   $ 41,670

Noncurrent assets

   $ 8,538

Current liabilities

   $ 8,740

Noncurrent liabilities

   $ 5,167

Note 6 - Goodwill and Intangibles, net

The Company identified the divestiture of its full service used auto parts operation as a triggering event that required testing the goodwill in the APB reporting segment for impairment. Based on the Company’s valuation analysis performed in relation to the divestiture the Company determined that the goodwill was not impaired as of the divestiture date. The Company will continue to monitor its goodwill and indefinite-lived intangible and long-lived assets for possible future impairment.

 

9


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

The gross changes in the carrying amount of goodwill by reportable segments during the first three months of fiscal 2010 were (in thousands):

 

     Metals
Recycling
Business
    Auto Parts
Business
    Total  

Balance as of August 31, 2009

   $ 228,977      $ 137,582      $ 366,559   

Foreign currency translation adjustment

     —          608        608   

Acquisitions

     (1,162     14,266        13,104   

Divestitures

     —          (12,030     (12,030
                        

Balance as of November 30, 2009

   $ 227,815      $ 140,426      $ 368,241   
                        

The following table presents the Company’s intangible assets and their related lives (in thousands):

 

          November 30, 2009     August 31, 2009  
     Life In
Years
   Gross
Carrying
Amount
   Accumulated
Amortization
    Gross
Carrying
Amount
   Accumulated
Amortization
 

Identifiable intangibles:

             

Tradename

   Indefinite    $ 750    $ —        $ 750    $ —     

Tradename

   20      —        —          972      (227

Tradename

   1 - 6      583      (306     583      (275

Marketing agreement

   5      1,240      (75     —        —     

Employment agreements

   2      1,117      (465     1,117      (326

Covenants not to compete

   3 - 20      27,083      (10,449     22,782      (9,949

Leasehold interests

   4 - 25      862      (243     1,550      (540

Lease termination fee

   15      200      (194     200      (191

Permits & licenses

   3      80      (20     80      (13

Supply contracts

   Indefinite      361      —          361      —     

Supply contracts

   5 - 6      4,363      (1,422     5,269      (1,931

Real property options

   Indefinite      210      —          210      —     
                                 

Total

      $ 36,849    $ (13,174   $ 33,874    $ (13,452
                                 

Intangible assets with finite useful lives are amortized over their useful lives using methods that reflect the pattern over which the economic benefits are expected to be consumed or on a straight-line basis based on estimated lives. Amortization expense for identifiable intangible assets for the three months ended November 30, 2009 and 2008 was $1 million.

Note 7 - Environmental Liabilities and Other Contingencies

The Company evaluates the adequacy of its environmental liabilities on a quarterly basis. Adjustments to the liabilities are made when additional information becomes available that affects the estimated costs to study or remediate any environmental issues or expenditures are made for which reserves were established.

Changes in the Company’s environmental liabilities for the first three months of fiscal 2010 were (in thousands):

 

Reporting Segment

   Beginning
Balance
September 1, 2009
   Reserves
Established, Net
   Payments     Ending
Balance
November 30, 2009
   Short-Term    Long-Term

Metals Recycling Business

   $ 25,608    $ 150    $ (303   $ 25,455    $ 2,441    $ 23,014

Auto Parts Business

     16,300      —        —        $ 16,300      554      15,746
                                          

Total

   $ 41,908    $ 150    $ (303   $ 41,755    $ 2,995    $ 38,760
                                          

 

10


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Metals Recycling Business (“MRB”)

At November 30, 2009, MRB’s environmental reserves of $25 million consisted primarily of the reserves established in connection with potential future clean-up of MRB locations at which the Company or its subsidiaries have conducted business or allegedly disposed of certain materials and various sites acquired through acquisitions.

Portland Harbor

In fiscal 2006, the Company was notified by the U.S. Environmental Protection Agency (“EPA”) under the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”) that it was one of at least 69 potentially responsible parties (“PRPs”) that own or operate or formerly owned or operated sites adjacent to the Portland Harbor Superfund site. The precise nature and extent of any clean-up of the Portland Harbor, the parties to be involved, the process to be followed for any clean-up and the allocation of any costs for the clean-up among responsible parties have not yet been determined. It is unclear to what extent, if any, the Company will be liable for environmental costs or damages associated with the Portland Harbor Superfund site. It is also unclear to what extent natural resource damage claims or third party contribution or damage claims will be asserted against the Company. While the Company participated in certain preliminary Portland Harbor study efforts, it is not party to the consent order entered into by the EPA with other certain PRPs, referred to as the “Lower Willamette Group” (“LWG”), for a remedial investigation/feasibility study; however, the Company could become liable for a share of the costs of this study at a later stage of the proceedings.

During fiscal 2006, the Company received letters from the LWG and one of its members with respect to participating in the LWG Remedial Investigation/Feasibility Study (“RI/FS”) and demands from various parties in connection with environmental response costs allegedly incurred in investigating contamination at the Portland Harbor Superfund site. In an effort to develop a coordinated strategy and response to these demands, the Company joined with more than twenty other newly-noticed parties to form the Blue Water Group (“BWG”). All members of the BWG declined to join the LWG. As a result of discussions between the BWG, LWG, EPA and Oregon Department of Environmental Quality (“DEQ”) regarding a potential cash contribution to the RI/FS, certain members of the BWG, including the Company, agreed to an interim settlement with the LWG under which the Company contributed toward the BWG’s total settlement amount. The Company has also joined with the LWG and more than 50 other PRPs in a voluntary process for establishing an allocation of costs at the site. These parties are currently working on the selection of an allocator. At the same time, the LWG has moved forward with litigation seeking to bring additional parties into the allocation process.

The DEQ is performing investigations involving the Company sites, which are focused on controlling any current releases of contaminants into the Willamette River. Separately, in January 2008, the Natural Resource Damages Trustee Council (“Trustees”) for Portland Harbor invited the Company and other PRPs to participate in funding and implementing the Natural Resource Injury Assessment for the site. Following meetings among the Trustees and the PRPs, a funding and participation agreement was negotiated under which the participating PRPs agreed to fund the first phase of natural resource damage assessment. The Company joined in that agreement and agreed to pay $100,000 of those costs.

The cost of the investigations and remediation associated with these properties is not reasonably estimable until the completion of the data review and further investigations now being conducted by the LWG and the Trustees. In fiscal 2006, the Company recorded a liability for its estimated share of the costs of the investigation incurred by the LWG to date. As of November 30, 2009, the Company has reserved $1 million for third party investigation costs of the Portland Harbor Superfund site.

Other Metals Recycling Business Sites

The Company’s environmental reserves include $24 million for potential future clean-up of other MRB locations at which the Company or its subsidiaries have conducted business or allegedly disposed of other materials. No environmental compliance enforcement proceedings are currently pending related to these sites.

 

11


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Auto Parts Business (“APB”)

At November 30, 2009, the Company’s environmental reserves include $16 million for potential future clean-up of APB locations at which the Company or its subsidiaries have conducted business or allegedly disposed of other materials. No environmental compliance enforcement proceedings are currently pending related to these sites.

Steel Manufacturing Business (“SMB”)

SMB’s electric arc furnace generates dust (“EAF dust”) that is classified as hazardous waste by the EPA because of its zinc and lead content. As a result, the Company captures the EAF dust and ships it in specialized rail cars to a domestic firm that applies a treatment that allows the EAF dust to be delisted as hazardous waste so it can be disposed of as a non-hazardous solid waste.

SMB has an operating permit issued under Title V of the Clean Air Act Amendments of 1990, which governs certain air quality standards. The permit was first issued in fiscal 1998 and has since been renewed through fiscal 2012. The permit allows SMB to produce up to 950,000 tons of billets per year and allows varying rolling mill production levels based on levels of emissions.

SMB had no environmental reserves at November 30, 2009 or 2008.

Contingencies - Other

On October 16, 2006, the Company finalized settlements with the Department of Justice (“DOJ”) and the SEC resolving an investigation related to a past practice of making improper payments to the purchasing managers of the Company’s customers in Asia in connection with export sales of recycled ferrous metal. Under the settlement, the Company agreed to a deferred prosecution agreement with the DOJ (the “Deferred Prosecution Agreement”) and an order issued by the SEC instituting cease-and-desist proceedings, making findings and imposing a cease-and-desist order pursuant to Section 21C of the Securities Exchange Act of 1934 (the “Order”). Under the Deferred Prosecution Agreement, the DOJ agreed not to prosecute the Company if the Company met the conditions of the agreement for a period of three years including, among other things, that the Company engage a compliance consultant to advise its compliance officer and its Board of Directors on the Company’s compliance program. The Deferred Prosecution Agreement ended on October 15, 2009. Under the settlement, the Company agreed to cooperate fully with any ongoing, related DOJ and SEC investigations. The Company does not anticipate any further losses associated with this settlement.

Note 8 - Short-Term Borrowings

The Company’s short-term borrowings consist primarily of a one year, unsecured, uncommitted $25 million credit line with Wells Fargo Bank, N.A that expires in March 2010. Interest rates on outstanding indebtedness under the unsecured line of credit are set by the bank at the time of borrowing. The weighted average interest rate on this line was 2.05% at November 30, 2009. The Company had $24 million outstanding under this facility as of November 30, 2009 compared to no borrowings outstanding at August 31, 2009. The credit agreement contains various representations and warranties, events of default and financial and other covenants, including covenants regarding maintenance of a minimum fixed charge coverage ratio and a maximum leverage ratio. As of November 30, 2009 and August 31, 2009, the Company was in compliance with all such covenants.

Note 9 - Long-Term Debt and Capital Lease Obligations

The Company maintains a $450 million revolving credit facility that matures in July 2012 pursuant to an unsecured committed bank credit agreement with Bank of America, N.A., as administrative agent, and the other lenders party thereto. Interest rates on outstanding indebtedness under the amended agreement are based, at the Company’s option, on either the London Interbank Offered Rate (“LIBOR”) plus a spread of between 0.50% and

 

12


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

1.00%, with the amount of the spread based on a pricing grid tied to the Company’s leverage ratio, or the greater of the prime rate or the federal funds rate plus 0.50%. In addition, annual commitment fees are payable on the unused portion of the credit facility at rates between 0.10% and 0.25% based on a pricing grid tied to the Company’s leverage ratio. As of November 30, 2009 and August 31, 2009, the Company had borrowings outstanding under the credit facility of $134 million and $100 million, respectively.

The bank credit agreement contains various representations and warranties, events of default and financial and other covenants, including covenants regarding maintenance of a minimum fixed charge coverage ratio and a maximum leverage ratio. As of November 30, 2009 and August 31, 2009, the Company was in compliance with all such covenants.

As of November 30, 2009, the Company had capital lease obligations for the use of equipment that expire at various dates through September 2015. As of November 30, 2009 and August 31, 2009, the Company had $2 million and $3 million, respectively, of assets accounted for as capital leases that were included in property, plant and equipment on the condensed consolidated balance sheets. Additionally, as of November 30, 2009 and August 31, 2009, the Company had $8 million of long-term bonded indebtedness that matures in January 2021.

Note 10 - Related Party Transactions

The Company purchases recycled metal from its joint venture operations at prices that approximate fair market value. These purchases totaled $4 million and $5 million in the first quarter of fiscal 2010 and 2009, respectively. Advances to (payments from) these joint ventures were less than ($1) million and $1 million in the first quarter of fiscal 2010 and 2009, respectively. The Company owed $2 million to joint ventures as of November 30, 2009 and August 31, 2009.

Thomas D. Klauer, Jr., President of the Company’s Auto Parts Business, is the sole shareholder of a corporation that is the 25% minority partner in a partnership in which the Company is the 75% partner and which operates four self-service stores in Northern California. Mr. Klauer’s 25% share of the profits (loss) of this partnership totaled less than $1 million in the first quarter of fiscal 2010 and fiscal 2009. Mr. Klauer and the Company also jointly own the real property at one of these stores, which is leased to the partnership. Mr. Klauer’s share of the annual rent paid by the partnership is less than $1 million. The term of this lease expires in December 2010, and the partnership has the option to renew the lease, upon its expiration, for a five-year period. Rent under the lease is adjusted annually based on the Consumer Price Index. Also in 2009, Mr. Klauer, through a company of which he is the sole shareholder, acquired ownership of a contiguous parcel of real property, a portion of which is occupied by the partnership under an expired lease. The Company and Mr. Klauer are discussing the terms for a new long-term lease of that parcel by the partnership. The rent paid by the partnership to Mr. Klauer’s company in the first quarter of fiscal 2010 for this parcel was less than $1 million. In addition, during fiscal 2008, the Company loaned this partnership $5 million to fund the exercise of an option to purchase another property occupied by the partnership from an unrelated third party. The loan bears interest at 5% per annum, and the partnership is prohibited from making distributions to its partners (other than for taxes on the income of the partnership) until the loan is repaid. The principal balance was repaid as of November 30, 2009 compared to a balance of $1 million at August 31, 2009.

Gary Schnitzer, Gregory Schnitzer and Joshua Philip, each a member of the Schnitzer family, are employed by the Company. For the first three months of fiscal 2010 and 2009, these members of the Schnitzer family collectively earned total compensation of less than $1 million. Schnitzer family employees are considered related parties for financial reporting purposes because members of the Schnitzer family own significant interests in the Company and may exercise control.

Members of the Schnitzer family also own all of the outstanding stock of Schnitzer Investment Corp. (“SIC”), which is engaged in the real estate business and was a subsidiary of the Company prior to 1988. Since December 2000 when the Portland Harbor was designated a superfund site, the Company has incurred $5 million, net of insurance reimbursements, in legal and consultant fees related to the investigation of this site. The Company and SIC are both potentially responsible parties (“PRPs”) with respect to the Portland Harbor, in some cases with respect to the same properties including the location of the Company’s Portland scrap operations. The Company and SIC have worked together in response to Portland Harbor matters, and the

 

13


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Company has paid all of the legal and consultant fees for the joint defense, in part due to its environmental indemnity obligation to SIC with respect to the Portland scrap operations property. As these costs have increased substantially in the last two years, the Company and SIC have agreed to an equitable cost sharing arrangement with respect to defense costs under which SIC will pay 50% of the legal and consultant costs, net of insurance recoveries, with respect to the Portland Harbor, including reimbursing the Company $2 million for SIC’s share of costs incurred to date. SIC paid $650,000 in December 2009 towards this obligation and has agreed to pay an additional $600,000 in each calendar quarter of 2010 until its 50% share of all previously incurred costs is paid.

It is the Company’s policy that all transactions with the Schnitzer family (including Schnitzer family companies) require the approval of the Company’s Audit Committee, and the Company is in compliance with this policy.

Note 11 - Derivative Financial Instruments and Fair Value Measurements

Natural gas price risk management

In order to minimize the volatility of its natural gas costs, which represented 3% of SMB’s cost of goods sold for the first three months of fiscal 2010 and 2009, SMB entered into a take-or-pay natural gas contract that obligates it to purchase a minimum of 3,500 million British Thermal Units (“BTU”) per day through October 31, 2009, and a minimum of 2,000 million BTU per day thereafter, whether or not the amount is utilized. The contract expires on May 31, 2011 and obligates the Company to purchase minimum quantities through October 31, 2010, whether or not the amount is used.

Fair value measurement

SMB’s natural gas contract is classified as a derivative instrument and carried at fair value. Fair value for this instrument, the only financial instrument carried at fair value, is determined using a forward price curve based on observable market price quotations at a major natural gas trading hub. The Company considers nonperformance risk in calculating fair value adjustments. This includes a credit risk adjustment based on the credit spreads of the counterparty when the Company is in an unrealized gain position or on the Company’s own credit spread when the Company is in an unrealized loss position. This assessment of nonperformance risk is generally derived from the credit default swap market or from bond market credit spreads. The impact of the credit risk adjustments for the Company’s outstanding derivative was not material to the fair value calculation as of November 30, 2009. Mark-to-market adjustments on this instrument resulted in a derivative liability of $4 million at November 30, 2009, compared to $6 million at August 31, 2009. This amount is classified as a Level 2 fair value measurement under the fair value hierarchy.

Derivative designated as a hedging instrument

On September 1, 2008, the Company designated the entire remaining portion of the natural gas contract as a cash flow hedge. Due to changes in the expectation of the Company’s future production as a result of changes in market conditions, the Company de-designated the contract as a hedge and re-designated only a portion, 20,000 million BTU per month, as a cash flow hedge in October 2008. The remaining portion of the contract is accounted for as a derivative not designated as a hedge.

Amounts included in accumulated other comprehensive income (“AOCI”) are reclassified to cost of goods sold when the forecasted purchase transaction is recognized in earnings and when ineffectiveness arises out of the hedge. Included in other accrued liabilities is the fair value of the designated hedge portion of the derivative of $1 million and $2 million as of November 30, 2009 and August 31, 2009, respectively. The effective portion of realized losses reclassified into cost of goods sold was less than $1 million for the three months ended November 30, 2009. The ineffective portion of unrealized losses included in cost of goods sold was less than $1 million for the three months ended November 30, 2009. The unrealized gain, net of tax, for the effective portion of the hedge is less than $1 million for the three months ended November 30, 2009. Upon de-designation of the cash flow hedge in October 2008, $1 million was reclassified from AOCI to cost of goods sold. Existing unrealized losses, net of tax, of less than $1 million currently recorded in AOCI are expected to be reclassified into cost of goods sold within the next 12 months.

 

14


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Derivative not designated as a hedging instrument

For the portion of the natural gas contract not designated as a hedge, the Company recognizes the change in fair value in cost of goods sold in the period of change. Included in other accrued liabilities is the fair value of the derivative not designated as a hedge of $3 million and $4 million as of November 30, 2009 and August 31, 2009, respectively. Net gains of $1 million were recognized in cost of goods sold for the three months ended November 30, 2009, compared to $1 million of net losses for the three months ended November 30, 2008.

Note 12 - Share-based Compensation

The Company recognized $3 million and $4 million for share-based compensation expense for the three months ended November 30, 2009 and 2008, respectively.

Fiscal 2010-2012 Performance Share Awards

On November 20, 2009, the Company’s Compensation Committee approved performance-based awards under the Plan and entry by the Company into Long-Term Incentive Award Agreements evidencing the award of these performance shares. The Compensation Committee established performance targets based on the Company’s earnings per share (weighted at 50%) and the average return on capital employed on a divisional basis (weighted at 50%) for the three years of the performance period, with award payouts ranging from a threshold of 50% to a maximum of 200% for each portion of the awards. A participant generally must be employed by the Company on the October 31 following the end of the performance period to receive an award payout, although adjusted awards will be paid if employment terminates earlier on account of death, disability, retirement, termination without cause after the first year of the performance period or on a sale of the Company. Awards will be paid in Class A common stock as soon as practicable after October 31 following the end of the performance period. The grant date for the fiscal 2010–2012 performance-based awards was November 20, 2009. Compensation expense for the fiscal 2010–2012 performance-based awards during the three months ended November 30, 2009 was less than $1 million.

Note 13 - Employee Benefits

The Company and certain of its subsidiaries have qualified and nonqualified retirement plans covering substantially all employees of these companies. These plans include a defined benefit plan, a supplemental executive retirement benefit plan (“SERBP”), defined contribution plans, and multi-employer pension plans. These plans are more fully described in the “Notes to the Consolidated Financial Statements” included in the Company’s Annual Report on Form 10-K for the year ended August 31, 2009.

 

15


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

The components of net periodic pension costs for the three months ended November 30, 2009 and 2008, were (in thousands):

 

     Defined Benefit Plan  
     Three Months Ended November 30,  
     2009     2008  

Interest cost

   $ 171      $ 195   

Expected return on plan assets

     (238     (243

Amortization of past service cost

     (24     —     

Recognized actuarial loss

     131        70   
                

Net periodic pension cost

   $ 40      $ 22   
                
     SERBP  
     Three Months Ended November 30,  
     2009     2008  

Service cost

   $ 15      $ 9   

Interest cost

     33        31   

Recognized actuarial gain

     (1     (8
                

Net periodic pension cost

   $ 47      $ 32   
                

Defined Benefit Plans

Benefits under the Company’s defined benefit plan were frozen effective June 30, 2006. In general, additional contributions to the plan are not required; however, changes in the discount rate or actual investment returns that are lower than the long-term expected return on plan assets could result in the need for the Company to make additional contributions. No contributions are expected to be made to the defined benefit plan in the remainder of fiscal 2010. However, changes in the discount rate or actual investment returns which continue to remain lower than the long-term expected return on plan assets could result in a requirement for the Company to make additional contributions. The Company did not make contributions to the defined benefit plan during the three months ended November 30, 2009 or 2008. Company contributions to the SERBP were less than $1 million for all periods presented.

Multiemployer Pension Plans

The Company contributes to various multiemployer pension plans in accordance with its collective bargaining agreements. The plans are jointly managed by trustees that include representatives from both management and labor unions. Contribution rates are established by collective bargaining and benefit levels are set by a joint board of trustees based on the advice of an independent actuary regarding the level of benefits that agreed-upon contributions can be expected to support. Company contributions to the multiemployer plans were $1 million during the three months ended November 30, 2009 and 2008.

The Company has contingent liabilities for its share of the unfunded liabilities of each plan to which it contributes that would be triggered if the Company were to withdraw or partially withdraw from that plan. Because the Company has no current intention of withdrawing from any of the multiemployer plans in which it participates, it has not recognized a liability for this contingency.

 

16


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Defined Contribution Plans

The Company has several defined contribution plans covering certain employees. For the three months ended November 30, 2009, the Company made no contributions to the defined contribution plans compared to contributions of $2 million for the same period of the prior year. The Company suspended employer contributions to these plans effective in March 2009. Resumption of these contributions will be based on a variety of factors, including Company performance and overall economic conditions and it is uncertain whether the Company will make contributions to these plans in the remainder of fiscal 2010.

Note 14 - Segment Information

The Company operates in three reportable segments: metal purchasing, processing, recycling, selling and trading (“MRB”), used auto parts (“APB”) and mini-mill steel manufacturing (“SMB”). Additionally, the Company is a non-controlling partner in joint ventures, which are either in the metals recycling business or are suppliers of unprocessed metal.

The information provided below is obtained from internal information that is provided to the Company’s chief operating decision-maker for the purpose of corporate management. The Company does not allocate corporate interest income and expense, income taxes, other income and expenses related to corporate activity, or corporate expense for management and administrative services that benefit all three segments. Because of this unallocated expense, the operating income (loss) of each segment does not reflect the operating income (loss) the segment would have as a stand-alone business.

The following is a summary of the Company’s total assets (in thousands):

 

     November 30, 2009     August 31, 2009  

Metals Recycling Business

   $ 1,278,697      $ 1,266,222   

Auto Parts Business

     232,567        272,983   

Steel Manufacturing Business

     322,770        331,811   
                

Total segment assets

     1,834,034        1,871,016   

Corporate and eliminations

     (538,159     (602,783
                

Total assets

   $ 1,295,875      $ 1,268,233   
                

 

17


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

The table below illustrates the Company’s operating results from continuing operations by segment for the three months ended November 30, 2009 and 2008, respectively (in thousands):

 

     Three Months Ended November 30  
     2009     2008  

Revenues:

    

Metals Recycling Business

   $ 316,472      $ 401,184   

Auto Parts Business

     55,261        40,703   

Steel Manufacturing Business

     68,680        98,632   
                

Segment revenue

     440,413        540,519   

Intersegment eliminations

     (46,131     (68,555
                

Total revenues

   $ 394,282      $ 471,964   
                

Depreciation and amortization:

    

Metals Recycling Business

   $ 9,292      $ 8,599   

Auto Parts Business

     1,771        1,452   

Steel Manufacturing Business

     3,051        2,970   
                

Segment depreciation and amortization

     14,114        13,021   

Corporate

     1,023        985   
                

Total depreciation and amortization

   $ 15,137      $ 14,006   
                

Reconciliation of the Company’s segment operating income (loss) to income (loss) from continuing operations before income taxes:

  

Metals Recycling Business

   $ 15,909      $ (19,249

Auto Parts Business

     10,417        (6,746

Steel Manufacturing Business

     (7,565     (31,286
                

Segment operating income (loss)

     18,761        (57,281

Corporate and eliminations

     (9,479     9,076   
                

Operating income (loss)

     9,282        (48,205

Other expense

     (199     (1,077
                

Income (loss) from continuing operations before income taxes

   $ 9,083      $ (49,282
                

Note 15 - Income Tax Expense (Benefit)

The effective tax rate for continuing operations for the first quarter of fiscal 2010 was 20.5%, compared to a benefit of 33.1% for the same period of fiscal 2009. The effective rate was less than the statutory rate because the Worker, Homeownership, and Business Act of 2009 extended the carry back period for corporate net operating losses (“NOLs”) from two years to five years, thereby restoring the tax benefit of the full Internal Revenue Code Section 199 manufacturing deduction originally claimed in fiscal 2007. This caused a 12.8% reduction in the fiscal 2009 effective rate. The remaining differences between the effective rate and the Federal statutory rate were attributable to the manufacturing deduction from current year operations, state taxes, the lower foreign tax rate on permanently reinvested foreign earnings, noncontrolling interests and nondeductible officers’ compensation.

The $49 million of refundable income taxes at November 30, 2009 primarily consisted of an overpayment from fiscal 2008 and an anticipated refund from carrying back fiscal 2009 NOLs to fiscal years 2004, 2005 and 2006.

 

18


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

The Company files federal and state income tax returns in the United States and foreign tax returns in Puerto Rico and Canada. The federal statute of limitations has expired for fiscal 2003 and prior years, and the Company is no longer subject to state and foreign tax examinations for those years. Federal and state tax authorities are currently examining the Company’s income tax returns for fiscal years 2004 to 2008.

Deferred taxes included the benefits from a federal NOL carry forward of $2 million that will expire if not used by 2012 and state tax credits that will expire if not used between 2010 and 2020. A valuation allowance of $1 million has been recorded at November 30, 2009 for the federal capital loss and state tax credits that are expected to expire unused in the future. Realization of the deferred tax assets is dependent upon generating sufficient taxable income prior to their expiration. Management believes it is more likely than not that the Company will realize the remaining deferred tax assets, net of the valuation allowance.

 

19


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This section includes a discussion of the Company’s operations for the first quarter of fiscal 2010 and 2009. The following discussion and analysis provides information which management believes is relevant to an assessment and understanding of the Company’s results of operations and financial condition. The discussion should be read in conjunction with the Company’s 2009 Form 10-K and the Unaudited Condensed Consolidated Financial Statements and the related notes thereto included elsewhere in this Form 10-Q.

FORWARD-LOOKING STATEMENTS

Statements and information included in this Quarterly Report on Form 10-Q by the Company that are not purely historical are forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934 and are made pursuant to the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995.

Forward-looking statements in this Quarterly Report on Form 10-Q include statements regarding the Company’s expectations, intentions, beliefs and strategies regarding the future, including statements regarding trends, cyclicality and changes in the markets the Company sells into, strategic direction, changes to manufacturing processes, the cost of compliance with environmental and other laws, expected tax rates and deductions, the realization of deferred tax assets, planned capital expenditures, liquidity positions, ability to generate cash from continuing operations, the potential impact of adopting new accounting pronouncements, expected results including pricing, sales volumes, profitability, obligations under the Company’s retirement plans, savings or additional costs from business realignment and cost containment programs and the adequacy of accruals.

When used in this report, the words “believes,” “expects,” “anticipates,” “intends,” “assumes,” “estimates,” “evaluates,” “may,” “could,” “opinions,” “forecasts,” “future,” “forward,” “potential,” “probable” and similar expressions are intended to identify forward-looking statements.

The Company may make other forward-looking statements from time to time, including in press releases and public conference calls. All forward-looking statements made by the Company are based on information available to the Company at the time the statements are made, and the Company assumes no obligation to update any forward-looking statements, except as may be required by law. Actual results are subject to a number of risks and uncertainties that could cause actual results to differ materially from those included in, or implied by, such forward-looking statements. Some of these risks and uncertainties are discussed in Item 1A. Risk Factors of Part I in the Company’s most recent Annual Report on Form 10-K. Other examples include volatile supply and demand conditions affecting prices and volumes in the markets for both the Company’s products and raw materials it purchases; world economic conditions; world political conditions; unsettled credit markets; the Company’s ability to match output with demand; changes in federal and state income tax laws; government regulations and environmental matters; the impact of pending or new laws and regulations regarding imports and exports into the United States and other countries; foreign currency fluctuations; competition; seasonality, including weather; energy supplies; freight rates and availability of transportation; loss of key personnel; the inability to obtain sufficient quantities of scrap metal to support current orders; purchase price estimates made during acquisitions; business integration issues relating to acquisitions of businesses; creditworthiness of and availability of credit to suppliers and customers; new accounting pronouncements; availability of capital resources; business disruptions resulting from installation or replacement of major capital assets; and the adverse impact of climate changes.

All references to “we,” “our,” “us,” “SSI,” and “the Company” refer to Schnitzer Steel Industries, Inc.

 

20


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

General

Founded in 1906, Schnitzer Steel Industries, Inc., an Oregon corporation, is currently one of the nation’s largest recyclers of ferrous and nonferrous scrap metal, a leading recycler of used and salvaged vehicles and a manufacturer of finished steel products.

We operate in three reportable segments: the Metals Recycling Business (“MRB”), the Auto Parts Business (“APB”) and the Steel Manufacturing Business (“SMB”), which collectively provide an end of life cycle solution for a variety of products through our integrated businesses. Corporate expense consists primarily of unallocated expense for management and administrative services that benefit all three business segments. As a result of this unallocated expense, the operating income (loss) of each segment does not reflect the operating income (loss) the segment would have as a stand-alone business. For further information regarding the Company’s segments refer to Note 14 – Segment Information, in the notes to the consolidated financial statements, in Part I, Item 1 of this report.

Our results of operations from continuing operations depend in large part on demand and prices for recycled metal in global and domestic markets and steel products in the Western U.S. Our deep water port facilities on both the East and West coasts of the U.S. (in Everett, Massachusetts; Oakland, California; Portland, Oregon; and Tacoma, Washington) and access to port facilities in Rhode Island, Hawaii and Puerto Rico allow the Company to meet the demand for recycled metal by steel manufacturers located in Europe, Asia, Central America and Africa. Our processing facilities in the Southeastern U.S. also provide access to the automobile and steel manufacturing industries in that region. Periodically, fluctuating or volatile supply and demand conditions affect market prices for and volumes of recycled ferrous and nonferrous metal in global markets and for steel products in the Western U.S. and can have a significant impact on the results of operations for all three operating segments, as can freight rates and the availability of transportation.

Executive Overview of Quarterly Results

In the first quarter of fiscal 2010 our financial results were impacted by the weak economic environment, with revenues in our MRB and SMB business segments lower in comparison with the same period in the prior year, which reflected higher priced sales made before the market declined. APB revenues, however, were higher in the quarter compared to the prior year, as they benefited from additional car volume generated from the Cash-For-Clunkers stimulus program. Despite lower consolidated revenues, we were able to generate positive operating income (excluding the operating results for discontinued operations) in the current quarter, compared to the same period in the prior year. While we continue to face challenging market conditions, we believe that our strong balance sheet will enable us to take advantage of investment opportunities in the business segments in which we operate, as well as provide working capital which enables us to build inventories necessary to support stronger export demand and higher sales volumes.

The following items represent a summary of financial information for the first quarter of fiscal 2010:

 

   

Revenues of $394 million, compared to revenues of $472 million in the first quarter of fiscal 2009;

 

   

Income from continuing operations attributable to SSI (excluding noncontrolling interest) of $6 million, or $0.23 per share (diluted), compared to loss from continuing operations attributable to SSI of ($33) million, or ($1.16) per share, in the first quarter of fiscal 2009;

 

   

Net loss from discontinued operations of ($15) million compared to ($1) million net loss from discontinued operations in the first quarter of fiscal 2009;

 

   

Net loss attributable to SSI of ($9) million, or ($0.30) per share (diluted), compared to net loss attributable to SSI of ($34) million, or ($1.21) per share in the first quarter of fiscal 2009.

For the first quarter of fiscal 2010, MRB generated revenues of $316 million, an $85 million decrease from the same period in fiscal 2009. This included an $81 million, or 26%, decrease in ferrous revenues and a $4 million, or 4%, decrease in nonferrous revenues. The decrease in ferrous revenues was primarily driven by a 23% decrease in the average net selling price as a result of the weak economic conditions and higher selling prices for shipments in the first half of the same period in fiscal 2009. MRB had operating income of $16 million for the first quarter of fiscal 2010, compared to a ($19) million operating loss for the same period in fiscal 2009.

 

21


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

The improvement in operating income was primarily due to $29 million in non-cash NRV inventory write-downs in the first quarter of fiscal 2009.

For the first quarter of fiscal 2010, APB generated revenues of $55 million, a $15 million increase from the same period in fiscal 2009. In addition, APB achieved record first quarter operating income (excluding the operating results from discontinued operations) of $10 million for the first quarter of fiscal 2010, compared to an operating loss of ($7) million for the same period in fiscal 2009. The increases in revenue and operating income were attributable to benefits recognized in the quarter from the Cash-For-Clunkers government stimulus program enhancing parts sales and improvements in commodity prices. We also completed the sale of our full-service used auto parts operation, which resulted in a loss of $15 million, net of tax from discontinued operations, primarily resulting from the write-off of goodwill.

For the first quarter of fiscal 2010, SMB generated revenues of $69 million, a $30 million decrease compared to the same period in fiscal 2009. The decrease in revenues over the prior year period reflected lower demand arising from weak economic conditions, which resulted in a 40% decrease in the average net selling price per ton for finished steel products, from $864 per ton in the prior year quarter to $520 in the current quarter. SMB had an operating loss of ($8) million for the first quarter of fiscal 2010, compared to an operating loss of ($31) million for the same period in fiscal 2009. The first quarter 2009 operating loss included $32 million in non-cash NRV inventory write-downs and $6 million of abnormal production costs that could not be capitalized into inventory.

Business Combinations

During the first quarter of fiscal 2010, we completed the acquisition of four self-service used auto parts facilities located near our MRB export facility located in Portland, Oregon that represent our first used auto parts operations in the Pacific Northwest. In addition, we signed a definitive agreement to acquire two additional self-service facilities in January 2010, which will increase the number of used auto parts facilities that we operate in the Dallas-Fort Worth Metroplex to four. All of the acquired facilities will operate under our Pick-N-Pull brand. The acquisition of the two additional facilities is not expected to be material to the Company’s results of operations.

We also completed the sale to LKQ of our full-service used auto parts operation, which had operated as part of the APB reporting segment.

 

22


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Results of Operations

 

     Three Months Ended November 30,  

($ in thousands)

   2009     2008     %
Change
 

Revenues:

      

Metals Recycling Business

   $ 316,472      $ 401,184      (21%

Auto Parts Business

     55,261        40,703      36%   

Steel Manufacturing Business

     68,680        98,632      (30%

Intercompany revenue eliminations

     (46,131     (68,555   (33%
                  

Total revenues

     394,282        471,964      (16%
                  

Cost of goods sold:

      

Metals Recycling Business

     286,854        407,294      (30%

Auto Parts Business

     34,192        37,923      (10%

Steel Manufacturing Business

     74,841        127,980      (42%

Intercompany cost of goods sold eliminations

     (44,949     (82,643   (46%
                  

Total cost of goods sold

     350,938        490,554      (28%
                  

Selling, general and administrative expense:

      

Metals Recycling Business

     14,041        20,437      (31%

Auto Parts Business

     10,652        9,526      12%   

Steel Manufacturing Business

     1,404        1,938      (28%

Corporate

     8,349        5,583      50%   
                  

Total SG&A expense

     34,446        37,484      (8%
                  

Environmental matters:

      

Metals Recycling Business

     150        (5,613   NM   
                  

Total environmental matters

     150        (5,613   NM   
                  

Income from joint ventures

      

Metals Recycling Business

     (482     (1,685   (71%

Intercompany profit eliminations

     (52     (571   (91%
                  

Total joint venture income

     (534     (2,256   (76%
                  

Operating income (loss):

      

Metals Recycling Business

     15,909        (19,249   NM   

Auto Parts Business

     10,417        (6,746   NM   

Steel Manufacturing Business

     (7,565     (31,286   (76%

Corporate expense

     (8,349     (5,583   50%   

Change in intercompany profit (loss) elimination

     (1,130     14,659      NM   
                  

Total operating income (loss)

   $ 9,282      $ (48,205   NM   
                  

NM = Not Meaningful

 

23


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Revenues

Consolidated revenues for the first quarter of fiscal 2010 decreased $78 million, or 16%, to $394 million compared to the same period in fiscal 2009 with decreases in the MRB and SMB business segments being primarily driven by the weak economic conditions and prior year benefits from sales made before the market declined. These decreases were partially offset by an increase in the revenues generated in the APB business segment, which benefited in the quarter from increased car volumes from the Cash-For-Clunkers government stimulus program and improvements in commodity prices.

Operating Income (Loss)

Consolidated operating income (excluding operating results from discontinued operations) increased $57 million to operating income of $9 million for the first quarter of fiscal 2010 compared to the same period in fiscal 2009. The $57 million improvement in operating income was primarily due to $52 million in non-cash NRV inventory write-downs (comprised of $29 million at MRB, $32 million at SMB and ($9) million that was eliminated in consolidation) and $10 million of production costs that could not be capitalized in inventory in the first quarter of fiscal 2009.

Included in the operating income was a reduction in SG&A expense of $3 million for the first quarter of fiscal 2010 compared to the same period in the prior year. The reduction was primarily due to $2 million recognized for environmental cost reimbursements from a related party and $1 million from the settlement of a dispute with a customer.

In addition, certain one-time events benefited the results of the first quarter of fiscal 2009 which included a $2 million release of environmental reserves and a $3 million gain, both related to resolution of the Hylebos Waterways litigation; and a $5 million benefit arising from nondeductible executive incentive compensation that was awarded and included as nondeductible officers’ compensation for fiscal 2008 but was voluntarily and irrevocably declined in the first quarter of fiscal 2009.

Income Tax Expense (Benefit)

The effective tax rate for continuing operations for the first quarter of fiscal 2010 was 20.5%, compared to a benefit of 33.1% for the same period of fiscal 2009. The effective rate was less than the statutory rate because the Worker, Homeownership, and Business Act of 2009 extended the carry back period for corporate net operating losses (“NOLs”) from two years to five years, thereby restoring the tax benefit of the full Internal Revenue Code Section 199 manufacturing deduction originally claimed in fiscal 2007. This caused a 12.8% reduction in the fiscal 2009 effective rate. We expect the effective tax rate to be approximately 34.0% for the remainder of fiscal 2010.

Financial results by segment

We operate our business across three reportable segments: MRB, APB and SMB. Additional financial information relating to these business segments is contained in Item 1 – Financial Statements (unaudited) – Notes to Condensed Consolidated Financial Statements, Note 14 – Segment Information.

 

24


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Metals Recycling Business

 

     Three Months Ended
November 30,
 

($ in thousands, except for prices)

   2009     2008     %
Change
 

Ferrous revenues

   $ 232,009      $ 312,755      (26%

Nonferrous revenues

     82,854        86,517      (4%

Other

     1,609        1,912      (16%
                  

Total segment revenues

     316,472        401,184      (21%

Cost of goods sold

     286,854        407,294      (30%

Selling, general and administrative expense

     14,041        20,437      (31%

Environmental matters

     150        (5,613   NM   

(Income) from joint ventures

     (482     (1,685   (71%
                  

Segment operating income (loss)

   $ 15,909      $ (19,249   NM   
                  
                      

Average ferrous recycled metal sales prices ($/LT) (1)

      

Domestic

   $ 271      $ 371      (27%

Export

   $ 280      $ 353      (21%

Average

   $ 277      $ 359      (23%

Ferrous sales volume (LT, in thousands)

      

Steel Manufacturing Business

     122        145      (16%

Other domestic

     135        130      4%   
                  

Total domestic

     257        275      (7%

Export

     500        504      (1%
                  

Total ferrous sales volume (LT, in thousands)

     757        779      (3%
                  

Average nonferrous sales price ($/pound) (1)

   $ 0.73      $ 0.78      (6%

Nonferrous sales volumes (pounds, in thousands)

     110,247        107,359      3%   

Outbound freight included in cost of goods sold (in thousands)

   $ 25,306      $ 35,008      (28%

 

(1)

Price information is shown after excluding the cost of freight incurred to deliver the product to the customer.

LT = Long Ton, which is 2,240 pounds

NM = Not Meaningful

 

25


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Revenues

MRB revenues decreased $85 million, or 21%, to $316 million during the first quarter of fiscal 2010, compared to the same period in the prior year. This decrease was primarily attributable to lower average net sales prices due to weak economic conditions impacting demand, and higher selling prices on shipments in the first quarter of fiscal 2009 from sales made before the market declined.

Ferrous revenues decreased $81 million, or 26%, to $232 million during the first quarter of fiscal 2010 compared to the same period in the prior year. The decrease in ferrous revenues was driven by lower average net selling prices, which decreased $82 per long ton, or 23%, in the first quarter of fiscal 2010 compared to the same period in the prior year.

Nonferrous revenues decreased $4 million, or 4%, to $83 million in the first quarter of fiscal 2010 compared to the same period in the prior year. The decrease in nonferrous revenues was primarily driven by lower average nonferrous net selling prices, which decreased $0.05, or 6%, to $0.73 per pound in the first quarter of fiscal 2010 compared to the same period in the prior year.

Segment Operating Income (Loss)

Operating income for MRB increased $35 million to $16 million in the first quarter of fiscal 2010 compared to an operating loss of ($19) million in the same period in the prior year. The increase was primarily due to $29 million in non-cash NRV inventory write-downs and $4 million of production costs that could not be capitalized in inventory in the first quarter of fiscal 2009, with no write-downs in the current quarter. The positive operating income in the first quarter of fiscal 2010 also reflected a focus on controlling costs and managing the cash spreads between the selling prices for recycled metal and purchase costs for raw materials.

Included in operating income was a reduction in SG&A expense of $6 million for the first quarter of fiscal 2010, primarily due to $2 million recognized for environmental cost reimbursements from a related party, $1 million from a settlement of a dispute with a customer, and lower compensation-related expenses, including incentive compensation, and reduced labor expenses resulting from prior year cost containment measures, which reduced headcount.

In addition, certain one-time events benefited the results of the first quarter of fiscal 2009 which included a $2 million release of environmental reserves and a $3 million gain, both related to resolution of the Hylebos Waterways litigation.

Auto Parts Business

 

     Three Months Ended November 30,  

($ in thousands)

   2009    2008     %
Change
 

Revenues

   $ 55,261    $ 40,703      36%   

Cost of goods sold

     34,192      37,923      (10%

Selling, general and administrative expense

     10,652      9,526      12%   
                 

Segment operating income (loss)

   $ 10,417    $ (6,746   NM   
                 

NM = Not Meaningful

Revenues

APB revenues increased $15 million, or 36%, to $55 million during the first quarter of fiscal 2010, compared to the same period in the prior year, driven by a $5 million increase in both scrap vehicle revenue and parts revenue and a $4 million increase in core revenue, due to higher sales volumes and prices, attributable to benefits recognized from additional vehicles purchased pursuant to the Cash-For-Clunkers government stimulus program, and improvements in commodity prices. The cars purchased through the Cash-For-Clunkers program were generally of a higher quality and as a result generated higher revenues from the parts sold.

 

26


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Segment Operating Income (Loss)

APB achieved record first quarter operating income (excluding the operating results from discontinued operations) of $10 million compared to an operating loss of ($7) million for the same period in the prior year. The improvement in operating income reflected the impact in the first quarter of higher sales volumes and prices for scrapped vehicles, parts and cores, primarily resulting from the Cash-For-Clunkers stimulus program, and improvements in commodity prices. The operating loss for the first quarter of fiscal 2009 was impacted by higher average inventory from cars purchased prior to the market decline.

Steel Manufacturing Business

 

     Three Months Ended November 30,  

($ in thousands, except price)

   2009     2008     %
Change
 

Revenues (2)

   $ 68,680      $ 98,632      (30%

Cost of goods sold

     74,841        127,980      (42%

Selling, general and administrative expense

     1,404        1,938      (28%
                  

Segment operating loss

   $ (7,565   $ (31,286   (76%
                  

Finished goods average sales price ($/ton) (1)

   $ 520      $ 864      (40%

Finished steel products sold (tons, in thousands)

     100        98      2%   

 

(1)

Price information is shown after netting the cost of freight incurred to deliver the product to the customer.

(2)

Revenues include sales of semi-finished goods (billets) and finished steel products.

Revenues

SMB revenues decreased $30 million, or 30%, to $69 million during the first quarter of fiscal 2010 compared to the same period in the prior year as a result of lower average selling prices for finished steel products, which decreased $344 per ton, or 40%, to $520 per ton compared to the same period in the prior year. The lower prices resulted from reduced demand related to weak economic conditions and benefits in the same period in the prior year from sales made before the market declined.

Segment Operating Loss

The operating loss for SMB decreased by $23 million to ($8) million in the first quarter of fiscal 2010 compared to an operating loss of ($31) million for the same period in the prior year. The reduction in the operating loss was due to $32 million in non-cash NRV inventory write-downs and $6 million of production costs that could not be capitalized in inventory in the first quarter of fiscal 2009, partly offset by benefits in the first quarter of fiscal 2009 from sales made before the market for finished steel products declined. SMB continues to be impacted by weak demand in the markets in which it operates which depressed sales prices, making it difficult to cover its raw material and production costs, and resulted in reduced and negative operating margins.

Liquidity and Capital Resources

We rely on cash provided by operating activities as a primary source of liquidity, supplemented by current cash resources and existing credit facilities.

Sources and Uses of Cash

We had cash balances of $20 million and $41 million at November 30, 2009 and August 31, 2009, respectively. Cash balances are intended to be used for working capital and capital expenditures.

Net cash used in operating activities for the three months ended November 30, 2009, was $90 million, compared to net cash provided by operating activities of $79 million in the same period of the prior year. Uses of cash included a $91 million increase in inventory (excluding $35 million of inventory sold as part of the divestiture of the full service auto parts operations) due to higher purchase costs and higher volumes of material

 

27


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

on hand at period end, an increase in accounts receivable of $9 million due to timing of collections, an $11 million decrease in accounts payable due to timing of payments and a $7 million decrease in accrued payroll liabilities due to the payment of fiscal 2009 incentive compensation awards in the first quarter of fiscal 2010.

Net cash provided by investing activities for the three months ended November 30, 2009 was $15 million, compared to net cash used in investing activities of $28 million in the same period of the prior year. Net cash provided by investing activities for the first three months of fiscal 2010 included $41 million in proceeds from the sale of the full-service auto parts business and other assets. This was partially offset by $18 million paid for completed acquisitions and $8 million in capital expenditures to upgrade the Company’s equipment and infrastructure.

Net cash provided by financing activities for the three months ended November 30, 2009 was $54 million, compared to net cash used in financing activities of $55 million in the same period of the prior year. The $57 million in additional borrowings was used to finance the growth in inventory.

Credit Facilities

Our short-term borrowings consist primarily of a one year, unsecured, uncommitted $25 million credit line with Wells Fargo Bank, N.A. that expires in March 2010. Interest rates on outstanding indebtedness under the unsecured line of credit are set by the bank at the time of borrowing. The weighted average interest rate on this credit line was 2.05% at November 30, 2009. We had $24 million outstanding under this facility as of November 30, 2009 compared to no borrowings outstanding at August 31, 2009.

We maintain a $450 million revolving credit facility that matures in July 2012, pursuant to an unsecured committed bank credit agreement with Bank of America, N.A., as administrative agent, and the other lenders party thereto. Interest rates on outstanding indebtedness under the amended agreement are based, at our option, on either the London Interbank Offered Rate (“LIBOR”) plus a spread of between 0.50% and 1.00%, with the amount of the spread based on a pricing grid tied to our leverage ratio, or the greater of the prime rate or the federal funds rate plus 0.50%. In addition, annual commitment fees are payable on the unused portion of the credit facility at rates between 0.10% and 0.25% based on a pricing grid tied to our leverage ratio. As of November 30, 2009 and August 31, 2009, we had borrowings outstanding under the credit facility of $134 million and $100 million, respectively.

The two bank credit agreements contain various representations and warranties, events of default and financial and other covenants, including covenants regarding maintenance of a minimum fixed charge coverage ratio and a maximum leverage ratio. As of November 30, 2009, we were in compliance with all such covenants.

In addition, as of November 30, 2009 and August 31, 2009, we had $8 million of long-term indebtedness in the form of bonds maturing in January 2021.

Acquisitions

Acquisitions during the first three months of fiscal 2010 were $18 million, compared to no acquisitions for the same period in the prior year. During the first three months of fiscal 2010, we continued to expand our presence in regions in which we operate and in new locations through the acquisition of value-creating businesses.

Capital Expenditures

Capital expenditures during the first three months of fiscal 2010 were $8 million, compared to $28 million for the same period last year. During the first quarter of fiscal 2010, we continued our investment in infrastructure improvement projects, including general improvements at a number of our metals recycling facilities, investments in technology to improve the recovery of nonferrous materials from the shredding process and investments to further improve efficiency and increase capacity, increase worker safety and enhance environmental systems. We plan to invest $60 million to $80 million in capital improvement projects for the remainder of the fiscal year.

 

28


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Share Repurchase Program

Pursuant to a share repurchase program authorized by our Board, we may repurchase up to 9.0 million shares of our Class A common stock when management deems such repurchases to be appropriate. Prior to fiscal 2010, we had repurchased approximately 5.1 million shares under the program. No share repurchases were made during the three months ended November 30, 2009, thus leaving approximately 3.9 million shares available for repurchase under existing Board authorizations.

Future Liquidity and Commitments

We make contributions to a defined benefit pension plan, several defined contribution pension plans and several multiemployer pension plans. Contributions vary depending on the plan and are based on plan provisions, actuarial valuations and negotiated labor agreements. Recently, most defined benefit plans have experienced deterioration in their funded status due to the general decline in investment values. We expect to make contributions to our various defined benefit, defined contribution and multiemployer plans of approximately $4 million for the remainder of fiscal 2010. However, as a result of the deterioration in the funded status of the defined benefit pension plans we may elect to make additional contributions in fiscal 2010. See Note 13 – Employee Benefits in the Notes to the Condensed Consolidated Financial Statements.

Accrued environmental liabilities as of November 30, 2009 were $42 million. We expect to pay $3 million over the next 12 months related to previously accrued remediation projects. These future cash outlays are anticipated to be within the amounts established as environmental liabilities.

We believe our current cash resources, internally generated funds, existing credit facilities and access to the capital markets will provide adequate financing for capital expenditures, acquisitions, working capital, stock repurchases, debt service requirements, post-retirement obligations and future environmental obligations for the next 12 months. However, continued weak general market conditions may result in the Company further utilizing its available credit lines and curtailing capital and operating expenditures, delaying or restricting acquisitions and share repurchases and reassessing working capital requirements. Should we determine, at any time, that we require additional sources of short-term liquidity, we will evaluate available alternatives and take appropriate steps to obtain sufficient additional funds. There can be no assurance that any such supplemental funding, if sought, could be obtained, or if obtained, would be adequate or on terms acceptable to the Company. However, we believe that our balance sheet at November 30, 2009 and the level of our existing credit facilities should provide additional sources of liquidity if required.

Off-Balance Sheet Arrangements

With the exception of operating leases, we are not a party to any off-balance sheet arrangements that have, or are reasonably likely to have, a current or future material effect on our financial condition, results of operations or cash flows. We enter into operating leases for both new equipment and property. There have been no material changes to any off-balance sheet arrangements as discussed in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our most recent Annual Report on Form 10-K.

Contractual Obligations

Long-term debt as reported in the contractual obligations table in our Annual Report on Form 10-K for the fiscal year ended August 31, 2009 has increased $34 million to $134 million as of November 30, 2009 due to increased net borrowings under our credit agreements as described above under “Liquidity and Capital Resources.”

 

29


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

Critical Accounting Policies and Estimates

Management’s Discussion and Analysis of Financial Condition and Results of Operations is based on the Company’s unaudited condensed consolidated financial statements, which have been prepared in accordance with generally accepted accounting principles in the United States of America (“U.S. GAAP”). The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses and related disclosure of contingent assets and liabilities. Management bases its estimates on historical experience and various other assumptions that it believes to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. An accounting policy is deemed to be critical if it requires an accounting estimate to be made based on assumptions about matters that are highly uncertain at the time the estimate is made, if different estimates reasonably could have been used, or if changes in the estimate that are reasonably likely to occur could materially impact the financial statements.

Goodwill

We evaluate the recoverability of goodwill on an annual basis during the second quarter of each fiscal year and upon the occurrence of certain triggering events or substantive changes in circumstances indicating that the fair value of goodwill may be impaired. On October 2, 2009, we entered into a definitive agreement to sell our full-service used auto parts operation, which had been operated as part of the APB reporting unit. We identified this divestiture as a triggering event, which resulted in testing goodwill in the APB reporting segment for impairment.

As part of our assessment of the recovery of APB goodwill, we conducted a valuation analysis using an income approach with an applied discount rate of 12.0%. The projections used in the income approach took into consideration current and projected future business cycles and did not project cash flows based upon historically high prices and volumes experienced in fiscal 2008. Based on the results of the first step of our annual assessment of the recoverability of goodwill, the fair value of APB exceeded its carrying value, indicating that there was no goodwill impairment. We considered what the impact of changes in the assumptions underlying our estimate of fair value would be on the determination of impairment. The fair value of the reporting unit would not fall below the carrying value if the forecasted cash flow were to decrease 20% or the discount rate were to increase by two percentage points. Based on our valuation analysis performed in relation to the divestiture of the full-service operations, we determined that the goodwill related to APB was not impaired. We will continue to monitor our goodwill and indefinite-lived intangible and long-lived assets for possible future impairment.

Business Combinations

On September 1, 2009 we adopted the revised accounting standard for business combinations. This standard requires the Company to recognize the assets acquired, the liabilities assumed, and any noncontrolling interests in the acquiree at the acquisition date, measured at their fair values as of that date. Measuring assets and liabilities at fair value requires us to determine the highest and best use that would be paid by a third party market participant. In addition, following the adoption of this standard, acquisition costs are expensed as incurred.

Recent Accounting Pronouncements

In December 2008, the FASB issued guidance regarding an employer’s disclosures about the plan assets of a defined benefit pension or postretirement plan and will require additional disclosure regarding investment policies and strategies, fair value of each major asset category based on risks of the assets, inputs and valuations techniques used to estimate fair value, fair value measurement hierarchy levels under pension accounting for each asset category and significant concentration of risk information. This standard will be effective for the Company for the fiscal year ending August 31, 2010. This guidance will enhance and provide more visibility over the Company’s footnote disclosures surrounding the plan assets of the Company’s defined benefit pension plan.

 

30


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Commodity Price Risk

We are exposed to commodity price risk, mainly associated with variations in the market price for finished steel products, ferrous and nonferrous metal, including scrap, autobodies and other commodities. The timing and magnitude of industry cycles are difficult to predict and are impacted by general economic conditions. We respond to changes in recycled metal selling prices by adjusting purchase prices on a timely basis and by turning rather than holding inventory in expectation of higher prices. We actively manage our exposure to commodity price risk and monitor the actual and expected spread between forward selling prices and purchase costs and processing and shipping expense. Sales contracts are based on spot market prices, and generally orders are placed 30 to 90 days ahead of shipment date. However, financial results may be negatively impacted where selling prices fall more quickly than adjustments to purchase prices or average inventory costs can be made, when customers fail to meet their contractual obligations or when levels of inventory have an anticipated net realizable value that is below average cost. If SMB’s estimate of finished steel product selling prices per ton decreased by 10%, there would have been a non-cash NRV write-down of $3 million within the SMB segment.

Credit Risk

As of November 30, 2009, 45% of our trade accounts receivable balance was covered by letters of credit, compared to 49% as of August 31, 2009. Of the remaining balance as of November 30, 2009 and August 31, 2009, 85% was less than 60 days past due.

 

ITEM 4. CONTROLS AND PROCEDURES

Disclosure Controls and Procedures

During the quarterly period covered by this report the Company’s management, with the participation of the Chief Executive Officer and Chief Financial Officer, completed an evaluation of the effectiveness of the design and operation of the Company’s disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Exchange Act). Based upon this evaluation, the Company’s Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of the quarterly period covered by this report, the Company’s disclosure controls and procedures were effective to ensure that information required to be disclosed by the Company in reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified by the Securities and Exchange Commission’s rules and forms and that such information is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosures.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal control over financial reporting during the fiscal quarter covered by this report that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

31


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

PART II

 

ITEM 1. LEGAL PROCEEDINGS

See Note 7 – Environmental Liabilities and Other Contingencies in the Notes to the Condensed Consolidated Financial Statements, incorporated by reference herein.

 

ITEM 1A. RISK FACTORS

There have been no material changes to the Company’s risk factors reported or new factors identified since the filing of the Company’s 2009 Annual Report on Form 10-K, which was filed with the Securities and Exchange Commission on October 27, 2009.

 

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

 

(a) None

 

(b) None

 

(c) None

 

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None

 

ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None

 

ITEM 5. OTHER INFORMATION

None

 

ITEM 6. EXHIBITS

 

10.1   

Fiscal 2010 Annual Performance Bonus Program for John D. Carter and Tamara L. Lundgren.

10.2   

Form of Long-Term Incentive Award Agreement under the 1993 Stock Incentive Plan.

31.1   

Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2   

Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1   

Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

32.2   

Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

32


Table of Contents

SCHNITZER STEEL INDUSTRIES, INC.

 

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

   

SCHNITZER STEEL INDUSTRIES, INC.

  (Registrant)

Date: January 7, 2010

 

By: 

 

/s/ Tamara L. Lundgren

    Tamara L. Lundgren
    President and Chief Executive Officer

Date: January 7, 2010

 

By: 

 

/s/ Richard D. Peach

   

Richard D. Peach

   

Sr. Vice President and Chief Financial Officer

 

33