Use these links to rapidly review the document
BRUKER CORPORATION Annual Report on Form 10-K Table of Contents
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA



UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Form 10-K

ý ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT of 1934

For the fiscal year ended December 31, 2007

o

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT of 1934

Commission File Number 000-30833

BRUKER CORPORATION
(Exact name of registrant as specified in its charter)

Delaware
(State or other jurisdiction of
incorporation or organization)
  04-3110160
(I.R.S. Employer Identification No.)

40 Manning Road, Billerica, MA
(Address of principal executive offices)

 

01821
(Zip Code)

Registrant's telephone number, including area code: (978) 663-3660

Securities registered pursuant to Section 12(b) of the Act:

Title of Each Class
  Name of Each Exchange on Which Registered
Common Stock, $0.01 par value per share   The Nasdaq Global Select Market

Securities registered pursuant to Section 12(g) of the Act:
None

         Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o    No ý

         Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o    No ý

         Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

         Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

         Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act:

Large accelerated filer o   Accelerated filer ý   Non-accelerated filer o
(do not check if smaller reporting company)
  Smaller reporting company o

         Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o    No ý

         The aggregate market value of the voting and non-voting stock held by non-affiliates of the registrant as of June 29, 2007 (the last business day of the registrant's most recently completed second fiscal quarter) was $592,285,766, based on the reported last sale price on the Nasdaq Global Select Market. This amount excludes an aggregate of 39,688,294 million shares of common stock held by officers and directors and each person known by the registrant to own 10% or more of the outstanding common stock of the registrant as of June 29, 2007. Exclusion of shares held by any person should not be construed to indicate that such person possesses the power, direct or indirect, to direct or cause the direction of management or policies of the registrant, or that such person is controlled by or under common control with the registrant. The number of shares of the registrant's common stock outstanding as of March 10, 2008 was 163,358,506.

DOCUMENTS INCORPORATED BY REFERENCE

         The information required by Part III of this report (Items 10, 11, 12, 13 and 14) is incorporated by reference from Bruker Corporation's definitive Proxy Statement for its 2008 Annual Meeting of Stockholders.





BRUKER CORPORATION

Annual Report on Form 10-K

Table of Contents

 
   
  Page
Part I        
Item 1.   Business   4
Item 1A.   Risk Factors   26
Item 1B.   Unresolved Staff Comments   39
Item 2.   Properties   39
Item 3.   Legal Proceedings   40
Item 4.   Submission of Matters to a Vote of Security Holders   41

Part II

 

 

 

 
Item 5.   Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities   41
Item 6.   Selected Financial Data   44
Item 7.   Management's Discussion and Analysis of Financial Condition and Results of Operations   45
Item 7A.   Quantitative and Qualitative Disclosures About Market Risk   64
Item 8.   Financial Statements and Supplementary Data   67
Item 9.   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure   104
Item 9A.   Controls and Procedures   104
Item 9B.   Other Information   106

Part III

 

 

 

 
Item 10.   Directors, Executive Officers and Corporate Governance   107
Item 11.   Executive Compensation   107
Item 12.   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters   107
Item 13.   Certain Relationships and Related Transactions, and Director Independence   108
Item 14.   Principal Accounting Fees and Services   108

Part IV

 

 

 

 
Item 15.   Exhibits, Financial Statements and Schedules   109
    Signatures   114

        Any statements contained in this Annual Report on Form 10-K that are not statements of historical fact may be deemed to be forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934. Without limiting the foregoing, the words "believes," "anticipates," "plans," "expects," "seeks," "estimates," "should," and similar expressions are intended to identify forward-looking statements. Any forward-looking statements contained herein are based on current expectations, but are subject to a number of risks and uncertainties. The factors that could cause actual future results to differ materially from current expectations include, but are not limited to, risks and uncertainties relating to the Company's integration risks, failure of conditions, technological approaches, product development, market acceptance, cost and pricing of the Company's products, changes in governmental regulations, capital spending and government funding policies, FDA and other regulatory approvals to the extent applicable, competition, the intellectual property of others, patent protection and litigation and other factors, many of which are described in more detail in this Annual Report on Form 10-K under Item 1A. "Risk Factors" and from time to time in other filings we may make with the Securities and Exchange Commission. While the Company may elect to update forward-

2




looking statements in the future, it specifically disclaims any obligation to do so, even if the Company's estimates change, and readers should not rely on those forward-looking statements as representing the Company's views as of any date subsequent to the date of the filing of this report.

        References to "we," "us," "our," the "Company" or "Bruker BioSciences" refer to Bruker Corporation and, in some cases, its subsidiaries, as well as all predecessor entities.

        Our principal executive offices are located at 40 Manning Road, Billerica, MA 01821, and our telephone number is (978) 663-3660. Information about Bruker Corporation is available at www.bruker.com. The information on our website is not incorporated by reference into and does not form a part of this report. All trademarks, trade names or copyrights referred to in this report are the property of their respective owners.

3



PART I

ITEM 1.    BUSINESS

Our Business

        We design, manufacture, service and market analytical and life science systems and associated products to address the rapidly evolving needs of our customers in life science research, pharmaceutical, biotechnology and molecular diagnostics research, as well as in materials and chemical analysis in various industries and government applications. As of December 31, 2007, the period end for which this Annual Report on Form 10-K is being filed, Bruker BioSciences Corporation was the publicly traded parent company of Bruker AXS Inc., Bruker Daltonics Inc. and Bruker Optics Inc. On February 26, 2008, Bruker BioSciences Corporation closed its acquisition of the Bruker BioSpin Group, and renamed itself Bruker Corporation. Under United States Generally Accepted Accounting Principles, the acquisition of the Bruker BioSpin Group will be accounted for as an acquisition of businesses under common control and as a result, all historical consolidated balance sheets, statements of operations, statements of cash flows and notes to the consolidated financial statements in future filings with the Securities and Exchange Commission (SEC) will be restated by combining the historical consolidated financial statements of Bruker Corporation with those of the Bruker BioSpin Group. The information contained in Item 1. Business in this Annual Report on Form 10-K discusses Bruker Corporation as it legally existed on December 31, 2007, and does not include information about the Bruker BioSpin Group. Information relating to the Bruker BioSpin Group and a description of its operations are set forth in the Company's Definitive Proxy Statement on Schedule 14A, filed with the Securities and Exchange Commission on January 17, 2008.

Competitive Strengths and Strategy

        We believe our key competitive strengths include our:

        Our strategy is to capitalize on our proven ability to innovate and generate rapid revenue growth, both organically and through acquisitions. We believe our commitment to be an even more significant leader within our markets, to maintain above industry-standard growth and to leverage our continued research and development and distribution investments, will enhance our operating margins and improve our earnings and cash flow generation.

4


Business Segments

        We currently report financial results on three reportable operating segments: Bruker AXS, Bruker Daltonics and Bruker Optics.

        Bruker AXS' systems are advanced instruments that use extremely short wavelengths of energy to determine the characteristics of matter and the three-dimensional structure of molecules. Depending on the application, our X-ray systems utilize one of three core X-ray analysis methods: single crystal diffraction, known as SCD or X-ray crystallography; polycrystalline X-ray diffraction, known as XRD or X-ray diffraction; and X-ray fluorescence, known as XRF. Using our modular platforms, we often combine each of these three technology applications with sample preparation tools, automation, consumables and data analysis software. Our products, which have particular application in structural proteomics, drug discovery, nanotechnology research and materials science fields, provide our customers with the ability to determine the three-dimensional structure of specific molecules, such as proteins, and to characterize and determine the composition of materials down to the dimensions used in nanotechnology. Our customers include biotechnology and pharmaceutical companies, nanotechnology companies, semiconductor companies, raw material manufacturers, chemical companies, academic institutions and other businesses involved in materials analysis. We market some of our handheld XRF systems through distribution arrangements with a third party.

        Bruker Daltonics' mass spectrometers are sophisticated devices that measure the mass or weight of a molecule and can provide accurate information on the identity, quantity and primary structure of molecules. Our mass spectrometry-based solutions often combine advanced mass spectrometry instrumentation; automated sampling and sample preparation robots; reagent kits and other disposable products, called consumables, used in conducting tests, or assays; and powerful bioinformatics software. We offer mass spectrometry systems and integrated solutions for applications in multiple existing and emerging life-science markets including genomics, expression proteomics, clinical proteomics, metabolic and peptide biomarker profiling, drug discovery and development, molecular diagnostics research and molecular and systems biology, as well as basic molecular medicine research. Our substantial investment in research and development allows us to design, manufacture and market a broad array of products intended to meet the rapidly growing needs of our diverse customer base. Our customers include pharmaceutical companies, biotechnology companies, proteomics companies, molecular diagnostics companies, academic institutions and government agencies. In addition, we market some of our life science systems through strategic distribution arrangements with Agilent Technologies, Inc. (Agilent) Sequenom, Inc. (Sequenom) and others. We are also a worldwide leader in supplying mass spectrometry-based and other systems for CBRN detection in emergency response, homeland security and defense applications.

        Bruker Optics manufactures and distributes research, analytical and process analysis instruments based on infrared (IR), near-infrared (NIR), FT-Raman, Dispersive Raman and time-domain magnetic resonance (TD-NMR) spectroscopy. These products are utilized in industry, government and academia for a wide range of applications and solutions for life science, pharmaceutical analysis, food and agricultural analysis in research and development, quality control and process analysis applications. As with all spectroscopic techniques, vibrational spectroscopy can be used to identify a compound and to investigate the composition of a sample. Bruker Optics utilizes Fourier Transform (FT-IR, FT-NIR and FT-Raman) and the dispersive (Raman) measurement techniques on an extensive range of laboratory and process spectrometers. Infrared spectroscopy is a type of absorption spectroscopy that uses the infrared part of the electromagnetic spectrum. Raman spectroscopy relies on the Raman scattering of a monochromatic light that yields similar and complementary analytical information. Infrared and Raman spectroscopy are widely used in both research and industry as a simple, rapid, non-destructive and reliable technique for applications ranging from basic sample identification and quality control to advanced research. The Bruker Optics product line is complemented by a wide range of sampling

5



accessories and techniques which include microanalysis, high-throughput screening and many others, to help users find suitable solutions to analyze their samples effectively.

Products and Solutions


Bruker AXS

        Bruker AXS' X-ray systems integrate powerful detectors with advanced X-ray sources, computer-controlled positioning systems, sample handling devices and data collection and analysis software to acquire, analyze and manage elemental and molecular information. These integrated solutions address many of the matter characterization and structure needs of the life science, pharmaceutical, semiconductor, raw material and research industries across a broad range of applications. We provide high speed, sensitive systems for a variety of areas, including three-dimensional structure determination, protein crystal screening and molecular structure determination for the structural proteomics market as well as the small molecule drug discovery market. Additionally, we provide high-speed, automated systems for elemental analysis as well as high throughput, cost-effective systems for other areas, including combinatorial screening. We also sell other systems such as thermal analyzers, primarily in Japan, which measure the physical characteristics of materials as a function of temperature and can be used in development, production and characterization of materials in a variety of industries.

        Bruker AXS X-ray systems are based on the following five core technology applications:


        XRD systems investigate polycrystalline samples or thin films with single wavelength X-rays. The atoms in the polycrystalline sample scatter the X-rays to create a unique diffraction pattern recorded by a detector. Computer software processes the pattern and produces a variety of information, including stress, texture, qualitative and quantitative phase composition, crystallite size, percent crystallinity and layer thickness, composition, defects and density of thin films and semiconductor material. Our XRD systems combine modular, high precision and high quality ergonomic designs with broad applications for use in basic research and industrial process control. Our XRD systems contribute to a reduction in the development cycles for new products in the catalyst, polymer, electronic, optical material and semiconductor industries. Customers also use our XRD systems for analyses in a variety of other fields, including forensics, art and archaeology. We currently offer the following XRD systems:

Product

  Description

D8 SUPER SPEED SOLUTIONS™   High-speed and high throughput analysis based on high power turbo X-ray source technology.

D8 FOCUS™

 

Entry-level system for quantitative and qualitative powder diffraction applications.

D8 ADVANCE™

 

General purpose diffraction system for quantitative and qualitative analysis of polycrystalline samples.

D8 DISCOVER™, Series II

 

High resolution diffraction system for semiconductor and thin film analysis.

6



D8 DISCOVER CST™

 

Diffraction system with high-speed 2-D detector system for combinatorial screening of libraries in life science and materials research.

D8 SCREENLAB™

 

Diffraction system with high-speed 2-D detector and integrated Raman spectrometer for combinatorial screening of libraries in life sciences and materials research using the combination of two analytical methods.

D8 FABLINE™

 

X-ray diffraction metrology system for process control in semiconductor fab lines.

D4 ENDEAVOR™

 

Fully enclosed high throughput general purpose diffraction system for quantitative and qualitative analysis of polycrystalline samples.

D2 CRYSO™

 

A bench-top crystal orientation ED-XRD analyzer for the determination of lattice orientations in growing and processing single crystal materials.

CRYSOTAX

 

Benchtop ED-X-ray diffraction system for determination of crystal lattice orientations in production and processing of optical and semiconductor single crystals.

VANTEC-1™ Detector

 

High speed detector for all diffraction applications requiring high speed measurements.

VANTEC-2000™

 

A 2-D detector based on proprietary MikroGap™ technology: large active area, high spatial resolution, low noise, and large dynamic range.

NanoSTAR™

 

Small angle X-ray scattering for analysis of polymers, biological materials, fibers, and nanopowders in solutions of 10 to 1,000 Angstroems.

LynxEye™ Detector

 

General purpose high speed detector for all diffraction applications.

        XRF systems determine the elemental composition of a material and provide a full qualitative and quantitative analysis. Our XRF systems direct X-rays at a sample, and the atoms in the sample absorb the X-ray energy. The elements in the sample then emit X-rays which are characteristic for each element. The system collects the X-rays, and the software analyzes the resulting data to determine the elements which are present. Our XRF products provide automated solutions on a turn-key basis in response to the industrial marketplace demand for automated, controlled production processes that reduce product and process cost, increase output and improve product quality. Our XRF products cover substantially all of the periodic table and can analyze solid, powder or liquid samples. In addition, our XRF products require minimal sample preparation. We currently offer the following XRF systems:

Product

  Description

S2 PICOFOX™   Transportable benchtop total reflexion ED-XRF spectrometer for trace element analysis in pharma, geological, mining, environmental and food testing.

S2 RANGER™

 

All-in-one benchtop ED-XRF spectrometer for elemental analysis.

7



S4 PIONEER™

 

High performance WD-XRF spectrometer for use in demanding process control and quality assurance applications.

S4 EXPLORER™

 

High performance plug-and-analyze WD-XRF spectrometer for elemental analysis.

S8 TIGER™

 

High performance and high speed XRF spectrometer for use in demanding process control and quality assurance applications.

EQUA ALL

 

Solutions software which enables quantification of elements in all concentration ranges when combined with the S2 RANGER.

XMET

 

Handheld XRF spectrometer series sold as an OEM product and distributed by a third party. The instrument has various applications such as alloy sorting in metals and in ROHS applications identifying trace heavy elements in plastics.

TRACER III V

 

Handheld XRF instrument allowing for complete portability in non destructive testing of works of art and archaeological samples.

        SCD systems determine the three-dimensional structures of molecules in a chemical, mineral or biological substance being analyzed. SCD systems have the capability to determine structure in both small chemical molecules and larger biomolecules. SCD systems direct an X-ray beam at a solid, single crystal sample. The atoms in the crystal sample scatter the X-rays to create a precise diffraction pattern recorded by an electronic detector. Software then reconstructs a model of the structure and provides the unique arrangement of the atoms in the sample. This information on the exact arrangement of atoms in the sample is a critical part of molecular analysis and can provide insight into a variety of areas, including how a protein functions or interacts with a second molecule. Our SCD systems combine high sensitivity and rapid data collection to quickly generate accurate structures for use in the life sciences industry, academic research and a variety of other applications. We currently offer the following SCD systems:

Product

  Description

APEX II™ CCD   Consists of a CCD detector with lower noise, higher sensitivity and wider dynamic range as well as electronics which are user selectable.

AXIOM

 

A sensitive X-ray imager for demanding macromolecular applications. It exploits our proprietary MicroGap technology to achieve true quantum-limited performance with no detector noise and zero readout deadtime.

MICROSTAR-HII and MICROSTAR-ULTRAII

 

X-ray source technology with rotating anode generators for protein crystallography in particular. Includes advances in anode design, electron and X-ray optics to achieve extraordinary brightness and X-ray intensity.

8



X8 PROTEUM™

 

Rotating anode generator based lab system with a high sensitivity CCD detector or our latest generation AXIOM detector and four-axis kappa goniometer for 3-D structural determination of biological macromolecules.

KAPPA APEX II, SMART APEX II

 

Combines the sensitive APEX II CCD with our sophisticated kappa goniostat for sample positioning, to be used for chemical crystallography.

KAPPA APEX DUO

 

Allows the user to instantaneously change wavelengths from molybdenum K-alpha to Copper K-alpha under software control. Useful for experiments that require or benefit from dual wavelength.

X8 PROSPECTOR

 

A photon-counting X-ray detector with an advanced microfocus sealed tube that produces a system with performance superior to conventional rotating anode systems. Useful for crystal screening applications or absolute structure determination.

SMART X2S

 

A bench-top system for chemical crystallography. It is completely automated from sample mounting and alignment through data collection and structure determination.

BruNo™ Robotics

 

Robotic sample handling of frozen protein crystals for high throughput screening and data collection.

Nexus' Crystal Farm™

 

Benchtop system with integrated incubation and imaging system for high throughput protein crystallization automation. Bruker AXS is the worldwide distributor for Nexus' Crystal Farm™ line of protein crystallography products.

        MA systems analyze the chemical composition of materials under investigation in electron microscopes, utilizing the fact that atoms of different chemical elements irradiate X-rays of different, characteristic energy. The evaluation of the energy spectrum collected by an energy dispersive X-ray detector allows the determination of the qualitative and quantitative chemical sample composition at the current beam position. This technique provides high spatial resolution since the information is obtained from a small sample volume in the order of only a few microns. MA systems allow for simultaneous analysis of all elements in the periodic table, beginning with atomic number 5 (boron). Our MA systems are used for a wide range of applications including nanotechnology and advanced materials research, as well as materials analysis and quality control. Customers for MA systems include

9



industrial customers, academia and government research facilities. We currently offer the following MA systems:

Product

  Description

QUANTAX®   Modular EDS system for qualitative and quantitative X-ray microanalysis in scanning or transmission electron microscopes. QUANTAX features SDD X-ray detector technology for high resolution, high speed X-ray detection without the need for liquid nitrogen cooling. Our ESPRIT software suite provides analytical tools for a variety of applications.

ARTAX™

 

Mobile ED-µXRF spectrometer for elemental analysis with high spatial resolution for investigation of works of art, in particular.

        OES-spark, or optical emission spectrometers (OES), are the ideal instruments for analyzing all types of metals. From pure metals trace analysis to high alloyed grades, OES-spark covers the complete range from sub-ppm to percentage levels. All relevant elements can directly be analyzed simultaneously. The technology uses an arc discharge to be ignited between an electrode and the compact metal sample, acting as a counter electrode. The sample surface is remelted, and applying energy causes atoms to jump to a higher orbit. Upon falling back, energy is released in the form of light. Atoms of a certain element emit light of specific wavelengths. Dispersing this light by means of a grating or prism into a spectrum allows the separation of wavelengths. By using very thin exit slits and photomultipliers the light of a distinct wavelength can be quantified. Certified standards are used to convert obtained light intensities into concentrations. Our OES-spark systems use the latest detector technology to offer fast and accurate read-outs. Currently we offer the following models:

Product

  Description

Q6 COLUMBUS   Small bench-top vacuum spectrometer offering time-resolved spectroscopy. Suited for single-base applications in foundries, die-casters, secondary smelters and many other metal businesses.

Q8 MAGELLAN

 

Stationary vacuum spectrometer with high-resolution 750 mm optical system. Equipped with all features necessary for optimized analysis of all types of metals. From single to multi-base applications, the system offers a maximum of 128 channels.

Q8 CORONADO

 

A fully automated metal analyzer that helps to reduce sample turnaround times and ensures consistent analytical quality. Available in different configurations for ferrous and non-ferrous applications. Incorporates our flagship OE spectrometer MAGELLAN within the automation system for enhanced performance.

Q4 TASMAN

 

A benchtop CCD-based OES-spark offers simple routine handling, optimal analytical performance and cost effective operation with minimal maintenance.

        Bruker AXS also distributes products manufactured by or in combination with others, such as a Bruker AXS instrument combined with a nuclear magnetic resonance (NMR) instrument manufactured by Bruker BioSpin or an FT-IR interferometer manufactured by Bruker Optics. Sales of such systems

10



include sales in combination with a Bruker AXS instrument as well as sales of standalone systems. Bruker AXS typically sells these systems in countries where our affiliates do not have a presence, including South Africa, Poland and Brazil. Sales of these systems contributed revenue of $21.8 million, $7.6 million and $6.8 million in 2007, 2006 and 2005, respectively.

Bruker AXS' Aftermarket

        In addition to system and solution sales, Bruker AXS generates revenues from sales of service, consumables and related products. Bruker AXS' aftermarket sales contributed revenue of $59.7 million, $47.3 million and $34.1 million in 2007, 2006 and 2005, respectively. Given the demands our products face in the field, general maintenance and replacement of consumables such as X-ray tubes and other parts is routine. We supply a large quantity of replacement X-ray tubes to customers over the lives of our systems. Upon expiration of the warranty period, we generate service revenues from our customers through service contracts, repair calls, training and other support services. Service revenue is generated either through post-warranty service contracts or on-demand service calls. The number of customers entering into service contracts varies by geographic region.

        In addition to providing service, consumables and replacement parts, we generate recurring revenue through the sale to our customers of a variety of accessory items, including sample handling devices, temperature and pressure control devices, enhanced X-ray optics and software packages. We also provide system upgrades to customers who desire to upgrade, rather than replace, older systems.


Bruker Daltonics

        Bruker Daltonics has developed a suite of mass spectrometry instruments that address a wide range of life sciences applications. Mass spectrometry is the method of choice for primary structure analysis, including the determination of amino acid sequence and post-translational modifications and protein quantification. As a result, mass spectrometry is a key enabling technology of the expression proteomics laboratory. Mass spectrometers are also increasingly used for the discovery of peptide, protein or metabolite biomarkers and panels or patterns of biomarkers. These biomarkers can be used for toxicity screening or to assess drug efficacy in pre-clinical trials in pharmaceutical drug development. They are also used in clinical research and validation studies in an effort to develop the emerging field of protein molecular diagnostics.

        Mass spectrometers are devices for measuring the mass, or weight, of intact molecules and of fragments of molecules which can provide structural information on the molecule. Mass spectrometry systems employ an ionization source which creates charged molecules and a mass separation/detection component that separates these charged molecules on the basis of mass to detect their presence and quantity. Mass spectrometry has been used in physics and chemistry for over fifty years. Over the past fifteen years, mass spectrometry has emerged as a powerful research tool in the life sciences. For example, mass spectrometers can determine the identity, amount, structure, sequence and other biological properties of small molecules, like drug candidates and metabolites, as well as large biomolecules, like proteins and DNA.

        Time-of-flight spectrometers measure mass based on the time it takes for charged molecules to travel from the ionization source to the detection component. With the ability to analyze more than 10,000 samples per day, these mass spectrometers currently have the highest sample throughput and can analyze the broadest range of masses of any mass spectrometer for use in the fields of genomics and proteomics. Our time-of-flight mass spectrometry solutions make use of this potential for increased speed by automating various steps of the analysis. Our time-of-flight solutions combine high sensitivity, accuracy and throughput to generate large volumes of accurate raw data, primarily for peptide analysis and proteomics in general.

11


        Bruker Daltonics' life science solutions are based on the following four core mass spectrometry technology platforms:

        MALDI-TOF mass spectrometers utilize an ionization process to analyze solid samples using a laser that combines high sample throughput with high mass range and sensitivity. Our MALDI-TOF mass spectrometers are particularly useful for: (a) oligonucleotide and synthetic polymer analysis; (b) protein identification and quantification; (c) peptide de novo sequencing; (d) determination of post-translational modifications of proteins; (e) interaction proteomics and protein function analysis; (f) drug discovery and development; and (g) fast body fluid and tissue peptide or protein biomarker detection. We currently offer the following MALDI-TOF instruments:

Product

  Description

ultraflex III™ TOF/TOF   High throughput protein identification by MALDI-TOF using peptide mass fingerprinting, followed by more detailed protein characterization via further fragmentation and secondary TOF/TOF detection.

autoflex III™ TOF/TOF

 

Vertical and relatively compact system which enables high throughput routine protein identification by MALDI-TOF peptide mass fingerprinting, immediately followed by more detailed protein characterization using MALDI-TOF/TOF tandem mass spectrometry on the same sample.

autoflex III™

 

MALDI-TOF instrument designed for industrial biology, used in SNP analysis and proteomics. Incorporates various performance, electronics and software enhancements, and can be optionally upgraded on-site to full TOF/TOF capabilities.

microflex LT™

 

Compact benchtop MALDI-TOF mass spectrometer for clinical proteomics and routine analysis of peptides, proteins and other large molecules.

microflex™

 

Compact, research-grade benchtop MALDI-TOF mass spectrometer with gridless design of reflectron and microScout ion source for expression proteomics and clinical proteomics.

OEM MALDI-TOF for Sequenom Compact MassArray system

 

A benchtop, medium throughput linear MALDI-TOF designed and manufactured by us for various DNA and RNA analysis methods developed and distributed by Sequenom, Inc.

12


        These products can also utilize our AnchorChip microarrays that prepare samples for analysis. These microarrays employ patented microfluidics technology that improves sensitivity and reduces analysis time per sample by concentrating, or "anchoring," the sample in a precisely defined location.

        ESI-TOF mass spectrometers utilize an electrospray ionization process to analyze liquid samples. This ionization process, which does not dissociate the molecules, allows for rapid data acquisition and analysis of large biological molecules. ESI-TOF mass spectrometers are particularly useful for: (a) identification, protein analysis and functional complex analysis in proteomics and protein function; (b) molecular identification in metabonomics, natural product and drug metabolite analysis; (c) combinatorial chemistry high throughput screening, or HTS; and (d) fast liquid chromatography mass spectrometry, or LC/MS, in drug discovery and development. We currently offer the following ESI-TOF instruments:

Product

  Description

micrOTOF™-Q II   A compact benchtop system that offers fast, high resolution and accurate LC/MS/MS performance with our SmartFormula 3-D method for automated unambiguous molecular formula determination.

micrOTOF™

 

Benchtop system with high resolution of 15,000 FWHM across a broad mass range for small molecule accurate mass measurement and automated candidate molecular formula determination, as well as peptide biomarker discovery from plasma and serum samples.

        FTMS systems utilize high-field superconducting magnets to offer the highest resolution, selectivity, and mass accuracy currently achievable in mass spectrometry. Our systems based on this technology often eliminate the need for time-consuming separation techniques in complex mixture analyses. In addition, our systems can fragment molecular ions to perform exact mass analysis on all fragments to determine molecular structure. FTMS systems are particularly useful for: (a) the study of structure and function of biomolecules including proteins, DNA and natural products; (b) complex mixture analysis including body fluids or combinatorial libraries; (c) high throughput proteomics and metabonomics; and (d) top-down proteomics of intact proteins without the need for enzymatic digestion of the proteins prior to analysis. We continue to offer next-generation hybrid FTMS systems which combine a traditional external quadrupole mass selector and hexapole collision cell, with a high-performance

13



FTMS for further ion dissociation, top-down proteomics tools, and ultra-high resolution detection. We currently offer the following FTMS systems:

Product

  Description

apex® ultra   Easy-to-use, compact hybrid Q-q-FTMS proteomics platform with the Apollo II high-sensitivity ion source and integrated electron capture dissociation tools for "top-down" proteomics, in which intact proteins are analyzed, and "bottom-up" proteomics, which involves enzymatically digesting proteins into peptides and identifying the protein from measurement of the peptides. Small molecule and drug imaging solutions available with smartbeam™ laser technology for drug development, biological and clinical research.

Magnets, 7-15 tesla

 

The apex® ultra can be configured with one of several magnet options ranging in fields from 7-15 tesla (we purchase these magnets from Varian/Magnex or from our affiliate, Bruker BioSpin). Infrared multiphoton dissociation (IRMPD) is also available as an option.

        ITMS systems collect all ions simultaneously, which improves sensitivity relative to previous quadrupole mass spectrometers. Ion trap mass spectrometers are particularly useful for: (a) sequencing and identification based on peptide structural analysis; (b) quantitative liquid chromatography mass spectrometry; (c) identification of combinatorial libraries; and (d) generally enhancing the speed and efficiency of the drug discovery and development process. We currently offer the following ITMS systems:

Product

  Description

HCTultra PTM Discovery System™   Ion trap system with electron transfer dissociation (ETD) fragmentation for post-translational modifications (PTM) of peptides and protein discovery and characterization, based on our HCTultra™.

HCTultra™

 

The HCTultra provides optimal ion trap performance in terms of sensitivity, speed and mass accuracy providing enhanced proteomics and metabolomics data quality and gain per unit time for LC-MS(MS) applications. ETD II module available for ultra-sensitive analysis of PTMs, such as phosphorylations or glycosylations, up to 12 kDa proteins.

HCTplus

 

High capacity trap, or HCT, with enhanced ion transmission, storage and detection capabilities and very fast scan speeds.

HCT™

 

Combines high ion storage capacity with fast scan modes for small molecule analysis as well as proteomics.

esquire6000™

 

Ion trap system provides standard and high performance MS and MS(n) for liquid chromatography mass spectrometry applications in drug discovery, drug development, academic research and general LC/MS/MS with an m/z range up to 6,000.

14



esquire4000™

 

Ion trap system provides standard and high performance MS and MS(n) for liquid chromatography mass spectrometry applications in drug discovery, drug development, academic research and general LC/MS/MS with an m/z range up to 4,000.

LC/MSD Trap

 

Various OEM ion traps.

        Our mass spectrometers can be combined with solutions packages and sample preparation robots designed to enhance throughput of genomics, proteomics and metabonomics analysis, as well as the identification of infectious organisms. Sales of our solutions packages and sample preparation robots are included in combination of sales from our four mass spectrometry platforms, as well as partly in our aftermarket business. We currently offer the following solution packages:

Product

  Description

ClinProt™   Provides a set of tools for the preparation, measurement and visualization of peptide and protein biomarkers for clinical proteomics.

Proteineer™

 

Integrates our mass spectrometers with robotics and bioinformatics to deliver maximum productivity in high throughput and high information content expression proteomics, including spot picking from 2-D gels into 96 and 384 micro well plates, automated digestion of proteins, sample preparation for mass spectrometric analysis, and data interpretation.

Metabolic Profiler™ NMR/TOF

 

Combines the structural and quantitative strengths of nuclear magnetic resonance, or NMR, and the sensitivity and exact mass capabilities of ESI-TOF mass spectrometry in an integrated hardware and processing software platform to create an integrated system for metabolic research and drug development. This system is co-marketed with Bruker BioSpin.

PROTEINEER sp™

 

The PROTEINEER sp robot enables automated spot picking from 2-D gels into 96 and 384 micro well plates.

PROTEINEER dp™

 

The PROTEINEER dp robot enables automated protein digestion and preparation of AnchorChip targets for MALDI-TOF analysis.

ProteinScape™

 

Organizes all relevant data for larger expression proteomics projects, including gel data, mass spectra, process parameters, and search results.

T5000

 

Developed by Isis Pharmaceuticals, the T5000 can identify, classify and quantify a broad range of pathogens.

Chemical, Biological, Radiological and Nuclear (CBRN) Detection

        We sell a wide range of portable analytical and bioanalytical detection systems and related products for CBRN detection. Our customers use these devices for nuclear, biological agent and chemical agent defense applications, anti-terrorism, law enforcement and process and facilities monitoring. Our CBRN detection products use many of the same technology platforms as our life

15



science products, as well as additional technologies, including infrared remote detection and ion mobility spectrometry for handheld chemical detectors. We also provide integrated, comprehensive detection suites which include our multiple detection systems, consumables, training and simulators. We currently offer the following systems:

Product

  Description

EM640™ Series   Transportable GC-MS for emergency response.

E2M, MM-1 and MM-2

 

Mobile MS for automatic detection of chemical substances.

OPAG 33™

 

Remote infra-red sensor for atmospheric pollutants.

RAID™ Series

 

Portable and stationary automated ion mobility detectors for chemical agents and toxic industrial chemicals detection.

RAPID™ (HAWK™)

 

Long-range infrared detector for chemical substance clouds.

SVG-2™

 

Solid-state radiation detector.

Bruker Daltonics' Aftermarket

        In addition to system and solution sales, Bruker Daltonics generates revenue from consumables, automation and separation products, training and services, and bioinformatics and software. Bruker Daltonics' aftermarket sales contributed revenue of $27.4 million, $28.6 million and $30.6 million in 2007, 2006 and 2005, respectively. We sell consumables for preparing, purifying and processing samples prior to mass spectrometric analyses as well as consumables for collecting samples for CBRN detection.

        Upon expiration of the warranty period associated with a system sale, which is typically one year, we also generate service revenues from our customers through service contracts, repair calls, training and other support services. Service revenue is generated either through post-warranty service contracts or on-demand service calls. The number of customers entering into service contracts varies by geographic region.

        In addition to providing service, consumables and replacement parts, we generate recurring revenue through the sale to our customers of a variety of accessory items. Among other things, we have automated control software to integrate separation devices and robotics into our solutions, we provide bioinformatics software to generate useable information from large volumes of raw data, and we offer intuitive data acquisition and analysis software on a Microsoft Windows platform to make our systems accessible to non-experts.


Bruker Optics

        Bruker Optics manufactures and distributes research, analytical and process analysis instruments based on infrared (IR), near-infrared (NIR), Raman and time-domain magnetic resonance (TD-NMR) spectroscopy. These products are utilized in industry, government and academia for a wide range of applications and solutions for life science, pharmaceutical analysis, food and agricultural analysis in research and development, quality control and process analysis applications. As with all spectroscopic techniques, vibrational spectroscopy can be used to identify a compound and to investigate the composition of a sample. Bruker Optics utilizes Fourier Transform (FT-IR, FT-NIR and FT-Raman) and the dispersive (Raman) measurement techniques on an extensive range of laboratory and process spectrometers. Infrared spectroscopy is a type of absorption spectroscopy that uses the infrared part of the electromagnetic spectrum. Raman spectroscopy relies on the Raman scattering of a monochromatic light that yields similar and complementary analytical information. Infrared and Raman spectroscopy

16



are widely used in both research and industry as a simple, rapid, non-destructive and reliable technique for applications ranging from basic sample identification and quality control to advanced research. The Bruker Optics' product line is complemented by a wide range of sampling accessories and techniques which include microanalysis, high-throughput screening and many others, to help users find the best suitable solution to analyze their samples effectively.

        Bruker Optics systems are based on the following four core technology applications:

        FT-IR, or Fourier transform infrared spectroscopy, is an interferometry-based IR technology offering a faster, more sensitive means of analysis than traditional IR spectroscopy. FT-IR is more time efficient because an entire spectrum is collected at once, rather than sequentially scanning from one wavelength to another across the spectrum. Traditional FT-IR users include the pharmaceutical, petrochemical, forensic/analytical, materials science and research sectors. We currently offer the following FT-IR solutions:

Product

  Description

ALPHA Series   Entry level, FT-IR spectrometer designed for routine QA/QC and teaching purposes.

TENSOR™ Series

 

Routine to research spectrometer designed for use in analytical laboratories, research and quality control.

VERTEX Series

 

Routine to research level instruments designed for demanding R&D experiments such as high resolution, ultra fast rapidscan and step-scan. Spectral ranges include very Far IR to UV/vis measurements.

IFS 125HR

 

The IFS 125HR is designed for high-resolution spectroscopy laboratories. In either absorption or emission mode, the IFS 125HR can resolve highly complex spectra into discrete lines for recognition and spectral assignment.

HYPERION™ Series

 

The
HYPERION™ series FT-IR microscopes are for infrared microanalysis and chemical imaging.

IRcube™

 

Compact, process ready OEM instrument, ideal for fiber optic coupling and gas cells.

OPAG 22

 

The Open Path Gas Analyzer (OPAG 22) is for remote sensing of hazardous atmospheric compounds. The system performance allows real-time field screening analysis.

        FT-NIR, or Fourier transform near infrared spectroscopy, is a more recent addition to laboratory NIR technologies. This technological advancement is heavily utilized in the pharmaceutical, food/agriculture and chemical industries. Given that FT-NIR instruments measure the entire spectrum simultaneously, they are faster and more sensitive, with lower noise levels. The inherent design of an FT-NIR system also provides for an internal calibration on every scan and it is ideal for process

17



environments. The pharmaceutical industry is the leading user of FT-NIR instruments, and applications include quality control, research and development, and process analytical technology. The food and agricultural industry is the second largest user of FT-NIR instrumentation, with much of its demand derived from the large installed base of conventional dispersive NIR systems that have long been used in that area. We currently offer the following FT-NIR solutions:

Product

  Description

MPA™   Combines multiple sampling techniques of Near Infrared spectroscopy into a single unit for analyzing solids, liquids, powders and tablets.

MATRIX™-F

 

A versatile instrument with applications ranging from raw material identification to quality control of finished products. It can be used as a standalone system for method development and then move directly into a process application and designed to withstand harsh environments.

MATRIX™-I

 

FT-NIR spectrometer designed for QA/QC analysis and is equipped with an integrating sphere in the sampling area which permits fast and easy analysis using the diffuse reflectance technique. Samples can be measured directly in their containers or poured into standard cups. This method of measuring large amounts of materials is particularly useful for analyzing inhomogeneous samples or large particle size items such as grains or seeds.

        FT-Raman spectroscopy is the measurement of the wavelength and intensity of inelastically scattered light utilizing an interferometer. The Raman scattered light occurs at wavelengths that are shifted from the incident light by the energies of molecular vibrations. Like FT-IR, the Raman spectrum provides information on molecular structure. The mechanism of Raman scattering is different from that of infrared absorption, in that Raman and IR spectra provide complementary information. Typical applications are in structure determination, qualitative analysis and quantitative analysis. Raman is useful for the identification of both organic and inorganic compounds and functional groups. It is a non-destructive technique, and can be used for the analysis of both liquids and solid surfaces. Raman is well suited for use in the polymer and pharmaceutical industries, and has applications in the metals, electronics, semiconductor and pulp and paper industries. The technique also has applications in the

18



life sciences, forensics and artwork authentication. We currently offer the following FT-Raman solutions:

Product

  Description

RAM II   The RAM II module is a dual channel FT-Raman accessory for Bruker Optics FT-IR spectrometers and is designed for researchers who seek flexibility of using different Raman laser wavelengths in combination with FT-IR spectroscopy.

RamanScopeIII

 

The RamanScope FT-Raman Microscope's high throughput optics and liquid nitrogen cooled Germanium detector offers ultra-low signal detection with minimal noise assuring excellent sensitivity.

RamSys™

 

The FT-Raman spectrometer RamSys™ is a dedicated Raman System for analytical process control applications. Rugged components, such as hazardous environment protected Raman probes, and the industrially hardened spectrometer parts makes the RamSys™ ideal for use in process environments.

RFS 100/S

 

The RFS 100/S provides flexible sample handling and high FT-Raman performance. Solid, liquid, and even gaseous samples can be measured in RFS 100/S' large sample compartment by using the variety of sample holders. A wide range of advanced sampling accessories are also available for research applications, as well as automatic sample changers of different sizes to optimize sample throughput in industrial laboratories.

        Dispersive Raman spectroscopy is the measurement of the wavelength and intensity of inelastically scattered light utilizing grating technology. The Raman scattered light occurs at wavelengths that are shifted from the incident light by the energies of molecular vibrations. Dispersive Raman technology can utilize a wide range of laser lines such as 488, 532, 633, and 785 nm, for a broad range of applications. Like FT-IR, the Raman spectrum provides information on molecular structure. The mechanism of Raman scattering is different from that of infrared absorption, in that Raman and IR spectra provide complementary information. Typical applications are in structure determination, qualitative analysis and quantitative analysis. Raman is useful for the identification of both organic and inorganic compounds and functional groups. It is a non-destructive technique, and can be used for the analysis of both liquids and solid surfaces. Raman is well suited for use in the polymer and pharmaceutical industries, and has applications in the metals, electronics, semiconductor and pulp and

19



paper industries. The technique also has applications in the life sciences, forensics and artwork authentication. We currently offer the following Dispersive Raman solutions:

Product

  Description

SENTERRA   The SENTERRA Dispersive Raman Microscope was designed to provide high performance in a compact and flexible platform and is a confocal system that can accommodate multiple excitation wavelengths with the highest possible spatial resolution.

SENTINEL®

 

The SENTINEL® is a Raman spectrometer developed for process control and automated lab applications and utilizes an On-Axis spectrograph, optimized for Raman spectroscopy and one standard grating covering the most widely used Raman signature range. The system features aberration free imaging, low noise CCD and innovative technology in signal processing result in excellent signal to noise ratio and maximum performance.

SURE_SPECTRUM

 

The
SURE_SPECTRUM is an OEM dispersive raman imaging spectrograph and scanning monochromator that features dual exit ports for flexibility.

        Bruker Optics also distributes bench-top time-domain nuclear magnetic resonance (TD-NMR) systems that use low-field non-superconducting magnets for quality control, process analysis and other applications. These systems are developed and manufactured by Bruker BioSpin Corporation.

Bruker Optics' Aftermarket

        In addition to system and solution sales, Bruker Optics generates revenues from sales of service, consumables and related products. Bruker Optics' aftermarket sales contributed revenue of $20.5 million, $16.6 million and $13.1 million in 2007, 2006 and 2005, respectively. Given the demands our products face in the field, general maintenance and replacement of certain parts is routine. Upon expiration of the warranty period, we generate service revenues from our customers through service contracts, repair calls, training and other support services. Service revenue is generated either through post-warranty service contracts or on-demand service calls. The number of customers entering into service contracts varies by geographic region.

        In addition to providing service, consumables and replacement parts, we generate recurring revenue through the sale to our customers of a variety of accessory items, including software packages. We also provide system upgrades to customers who desire to upgrade, rather than replace, older systems.

Research and Development

        We commit substantial capital and resources to internal and collaborative research and development projects in order to provide innovative products and solutions to our customers. We conduct research primarily to enhance system performance and improve the reliability of existing products, and to develop new innovative products and solutions. We expensed $58.5 million, $50.0 million and $47.5 million in 2007, 2006, and 2005, respectively, for research and development purposes. Our research and development efforts are conducted for the relevant products within Bruker AXS, Bruker Daltonics, and Bruker Optics as well as in collaboration on areas such as microfluidics, automation and workflow management software.

20


        Bruker AXS maintains technical competencies in core X-ray technologies and capabilities, including detectors used to sense X-ray diffraction patterns, X-ray sources and optics that generate and focus the X-rays, robotics and sample handling equipment which hold and manipulate the experimental material, and software that generates the structural data. Recent projects included refining next generation high brilliancy optics and microsources, developing new high power X-ray sources for X-ray diffraction and protein crystallography applications, developing a system with combined XRD and Raman technology for applications in high throughput combinatorial analysis, developing a new large solid angle, high resolution, high throughput energy dispersive (ED) X-ray detector for microanalysis, creating a high sensitivity area detector system and developing other solution-based technologies and software applications. In the past, Bruker AXS has accepted some sponsored research contracts, mainly from private sources. The research and development performed by Bruker AXS is conducted primarily at our facilities in Madison, WI, U.S.A., Karlsruhe, Germany, Kalkar, Germany, Kennewick, WA, U.S.A., and Yokohama, Japan.

        Bruker Daltonics maintains technical competencies in core mass spectrometry technologies and capabilities, including MALDI and ESI ion sources; TOF, TOF/TOF, and MS analyzers; bioinformatics; and software. The research and development performed by Bruker Daltonics is conducted primarily at our facilities in Billerica, MA, U.S.A., Bremen, Germany, and Leipzig, Germany. Bruker Daltonics also accepts some sponsored research contracts from external agencies such as government or private sources. Historically, we have been the recipient of significant government grants from the German and United States governments for various projects for early-stage research and development. We have generally retained at least non-exclusive rights to any items or enhancements we develop under these grants. The German government requires that we use and market technology developed under grants in order to retain our rights to the technology. In 2007, 2006, and 2005, Bruker Daltonics received government-sponsored research and development grants in the amounts of $0.7 million, $1.2 million and $2.1 million, respectively.

        Bruker Optics maintains technical competencies in core vibrational spectroscopy technologies and capabilities, including FT-IR, FT-NIR, FT-Raman and Dispersive Raman. The research and development performed by Bruker Optics is conducted primarily at our facilities in Ettlingen, Germany and The Woodlands TX, U.S.A. Recent advancements include an application to detect counterfeit drugs in conjunction with the Chinese State Food and Drug Administration. Another recent development is the ALPHA FT-IR, which is Bruker Optics' smallest FT-IR and is based on our patented and permanently aligned ROCKSOLID interferometer design. In the past, Bruker Optics has accepted some sponsored research contracts, mainly from the German government.

Customers

        We have a broad and diversified global life sciences and advanced and raw materials customer base. Our life science customer base is composed primarily of end-users and includes pharmaceutical, biotechnology, proteomics, food/feed/agricultural biotechnology, molecular diagnostics and fine chemical companies, as well as commercial laboratories, university laboratories, medical schools and other not-for profit research institutes and government laboratories. We sell our X-ray materials research and infrared Raman molecular spectroscopy solutions to the above customer groups as well as to a number of semiconductor, polymer, automotive, cement, steel, aluminum and combinatorial materials design companies. Our customers generally do not have a need to buy numerous systems at one time, and historically we have not depended on any single customer in the sale of our systems. No single customer accounted for more than 10% of revenue in any of the last three fiscal years.

Competition

        Our existing products and solutions and any products and solutions that we develop may compete in multiple, highly competitive markets. Many of our potential competitors in these markets have

21



substantially greater financial, technical and marketing resources than we do. They may offer or succeed in developing products that could render our products or those of our strategic partners obsolete or noncompetitive. In addition, many of these competitors have significantly more experience in the life sciences and materials markets. Our ability to compete successfully will depend on our ability to develop proprietary products that reach the market in a timely manner and are technologically superior to and/or are less expensive, or more cost effective, than other products marketed by our competitors. Current competitors or other companies may possess or develop technologies and products that are more effective than ours. Our technologies and products may be rendered obsolete or uneconomical by technological advances or entirely different approaches developed by one or more of our competitors.

        Bruker AXS competes with companies that offer analytical X-ray solutions and OES systems, primarily Rigaku (a private Japanese company), Oxford Instruments, Thermo Fisher Scientific, Ametek/Spectro, Panalytical (formerly a division of Philips, now a division of Spectris, a public U.K. company), Innov-X, WAS AG and others. Other competitors produce products based on some of the technology platforms that we utilize; however, none of them produce products utilizing all of our major technology platforms. Some of them have a greater market share than we have in particular technology platform areas.

        Bruker Daltonics competes with a variety of companies that offer mass spectrometry-based systems. Bruker Daltonics' competitors in the life sciences area include Applied Biosystems/MDS Sciex, Agilent, GE-Healthcare, Waters, Thermo Fisher Scientific (which includes Finnigan), Shimadzu/Kratos, Hitachi, JEOL and various automation companies. Bruker Daltonics' CBRN detection customers are highly fragmented, and we compete with a number of companies in this area, of which the most significant competitor is Smith Detection in the U.K.

        Bruker Optics competes with a variety of companies that offer molecular spectrometry-based systems, including Thermo Fisher Scientific (which includes Nicolet), PerkinElmer, Varian, Foss, ABB Bomen, Renishaw, Buchi, Shimadzu, JEOL and Oxford Instruments. There are also several smaller companies we compete with, specializing in various markets we sell to.

        We also compete with other companies that provide analytical or automation tools based on other technologies. These technologies may prove to be more successful in meeting demands in the markets that our products and solutions serve. In addition, other companies may choose to enter our fields in the future. We believe that the principal competitive factors in our markets are technology base applications expertise, product specifications and functionality, marketing expertise, distribution capability, proprietary patent portfolios, cost and cost effectiveness.

Sales and Marketing

        We maintain direct sales forces throughout most of North America, the European Union, Japan, Asia/Pacific and Australia. We have well equipped application and demonstration facilities and qualified application personnel who assist customers and provide product demonstrations in specific application areas. We maintain our primary demonstration facilities at our production facilities as well as in key markets elsewhere.

        We also utilize indirect sales channels to reach customers. We have various international distributors and independent sales representatives, including affiliated companies and various representatives in parts of Asia, Latin America and Eastern Europe. These distributors provide coverage in areas where we do not have direct sales personnel. In addition, we have adopted a distribution business model where we engage in strategic distribution alliances with other companies to address certain market segments. Bruker Daltonics maintains primary distribution alliances with Agilent and Sequenom. As part of its strategic alliance with Agilent, Bruker Daltonics manufactures an ion trap mass spectrometer which Agilent incorporates into its liquid chromatography mass spectrometry

22



systems for distribution into various markets. Through Sequenom, Bruker Daltonics sells medium throughput MALDI-TOF mass spectrometers into clinical genomics markets for medium throughput DNA and SNP analysis. Bruker AXS' KeyMaster Technologies subsidiary sells handheld OEM XRF systems via a third party, which incorporate proprietary detectors, software and application methods of the third party.

Sales Cycle

        Bruker AXS.    The typical sales cycle for Bruker AXS' products is anywhere from a few days for handheld systems to six to twenty-four months for other products. The sales cycle is three to twenty-four months for academic products and six weeks to twelve months for industrial products. The length of Bruker AXS' sales cycles is dependent primarily on the budgeting cycles of its customers.

        Bruker Daltonics.    The typical time between Bruker Daltonics' first customer contact and its receipt of a customer's order for life science systems is three to six months for most product lines. However, this sales cycle can be in excess of a year when a customer must budget the product into an upcoming fiscal year. CBRN detection products can have multi-year sales cycles for large production contracts.

        Bruker Optics.    The typical sales cycle for Bruker Optics' products is three to six months. The sales cycle can be significantly longer for larger-scale orders, such as the order with the Chinese State Food and Drug Administration, which we were awarded in December 2005.

Seasonal Nature of Business

        We experience highly variable and fluctuating revenues in the first three quarters of the year, while our fourth quarter revenues have historically been stronger than the rest of the year.

Intellectual Property

        Our intellectual property consists of patents, copyrights, trade secrets, know-how and trademarks. Protection of our intellectual property is a strategic priority for our business because of the length of time and expense associated with bringing new products through the development process and to the marketplace. We have a substantial patent portfolio, and we intend to file additional patent applications as appropriate. We believe our owned and licensed patent portfolio provides us with a competitive advantage. This portfolio permits us to maintain access to a number of key technologies. We license our owned patent rights where appropriate. We intend to enforce our patent rights against infringers if necessary.

        The patent positions of life sciences tools companies involve complex legal and factual questions. As a result, we cannot predict the enforceability of our patents with certainty. In addition, we are aware of the existence from time to time of patents in certain countries which, if valid, could impair our ability to manufacture and sell products in these countries.

        Bruker Daltonics is a party to an agreement dated as of August 10, 1998, with Indiana University's Advanced Research and Technology Institute (IU-ARTI), which is the technology transfer arm of Indiana University, pursuant to which we have been granted an exclusive license to specified patent rights and products including three patents that relate to time-of-flight mass spectrometry. We pay IU-ARTI royalties under this agreement and have agreed to allow IU-ARTI to utilize any improvements that we make to the licensed products for research and educational purposes on a non-exclusive, royalty-free basis. IU-ARTI may terminate the agreement if we default on our obligations or become bankrupt. We may terminate the agreement with six months notice. The license granted by the agreement expires at the later of August 10, 2008, or expiration of the licensed patent rights. In connection with a previous collaboration agreement between Bruker Daltonics and IU-ARTI,

23



IU-ARTI has agreed to perform experiments for Bruker Daltonics, as requested, in exchange for a flat fee and a percentage fee of any sales of products developed for us by IU-ARTI.

        Bruker Daltonics is also a party to an agreement with Applied Biosystems Group, an Applera Corporation business, and IU-ARTI. The agreement is for the licensing of a portfolio of significant mass spectrometry patents. As part of the agreement, we have been appointed the exclusive agent for licensing this combined intellectual property to the life-science industry. These patent portfolios relate to MALDI-TOF mass spectrometry and cover the significant technology called Space-Velocity Correlation Focusing (SVCF), or Delayed Extraction. This technology improves both accuracy and sensitivity, and is implemented in most modern MALDI-TOF systems. As licensing agent for IU-ARTI's SVCF patents, we have granted Applied Biosystems a sub-license in exchange for multi-year payments. Bruker Daltonics and Applied Biosystems also have cross-licensed each other on their respective patent portfolios related to this technology. In addition, as exclusive licensing agent, Bruker Daltonics has granted Waters Corporation a sub-license for a portfolio of these SVCF patents owned by Indiana University, Applied Biosystems and Bruker Daltonics, in exchange for a one-time technology access fee and multi-year payments.

        We also rely upon trade secrets, know-how, trademarks, copyright protection and licensing to develop and maintain our competitive position. We generally require the execution of confidentiality agreements by our employees, consultants and other scientific advisors. These agreements provide that all confidential information made known during the course of a relationship with us will be held in confidence and used only for our benefit. In addition, these agreements provide that we own all inventions generated during the course of the relationship.

        Our management considers Bruker BioSciences, Bruker AXS, Bruker Daltonics, and Bruker Optics to be our material trademarks.

        We are a party to various government contracts. Under some of these government contracts, the government may receive license or similar rights to intellectual property developed under the contract. However, under government contracts we enter we generally receive no less than non-exclusive rights to any items or technologies we develop.

Manufacturing and Supplies

        Several of our manufacturing facilities are certified under ISO 9001:2000, the most rigorous of the international quality standards. We manufacture and test our X-ray and OES products at our facilities in Madison, WI, U.S.A., Karlsruhe, Germany, Berlin, Germany, Kalkar, Germany, Kennewick, WA, U.S.A., and Yokohama, Japan. We manufacture and test our mass spectrometry products, including CBRN detection products, at our facilities in Billerica, MA, U.S.A., Bremen, Germany, and Leipzig, Germany. In addition, we manufacture and test our molecular spectroscopy products at our facilities in Billerica, MA, U.S.A., The Woodlands, TX, U.S.A., and Ettlingen, Germany. Manufacturing processes at our facilities in Germany include all phases of manufacturing, including machining, fabrication, subassembly, system assembly, and final testing. Our other facilities primarily perform high-level assembly, system integration, and final testing. We are insourcing the manufacturing of critical components to ensure in-house key competence.

        We purchase material and components from various suppliers that are either standard products or built to our specifications. We obtain some of the components included in our products from a limited group of suppliers or from a single-source supplier for items such as CCD area detectors, X-ray tubes, magnets, ion traps, robotics and infrared optics, among other things. In 1998, Bruker AXS commenced collaboration with Fairchild Imaging, Inc. for the development of charge coupled device (CCD) area detectors for use in chemical and biological X-ray crystallography. While Fairchild Imaging owns the chip included in the detector, Bruker AXS has exclusive rights for use of the chip in the SCD and XRD fields, subject to minimum purchase requirements. Bruker AXS also owns the rights to the

24



camera in which the chip is placed. In addition, Bruker AXS' new detector family is based on Bruker AXS' proprietary MikroGap™ technology. Bruker AXS has an ongoing collaboration and joint development project with the Siemens AG X-ray tube division (now Siemens Medical Solutions Vacuum Technology Division) in Germany for the development of X-ray tubes. The Bruker AXS subsidiaries Bruker AXS Microanalysis GmbH, Bruker-Quantron and KeyMaster Technologies presently procure certain key X-ray detector chips, certain OES optical detectors and certain miniaturized X-ray sources, respectively, from single-source suppliers. Bruker Daltonics has historically purchased a substantial portion of its magnets from a single supplier, Varian/Magnex, and also obtains certain key components for the manufacture of its ion traps from Agilent, the sole supplier of these components. Bruker Daltonics also sources certain FTMS electronic modules from Bruker BioSpin.

Government Contracts

        We are a party to various government contracts. Under some of these government contracts, the government may receive license or similar rights to intellectual property developed under the contract. However, under government contracts we enter we generally receive no less than non-exclusive rights to any items or technologies we develop. Although we transact business with various government agencies, we believe that no government contract is of such magnitude that a renegotiation of profits or termination of the contract or subcontracts at the election of the government would have a material adverse effect on the our financial results.

Government Regulation

        We are required to comply with federal, state, and local environmental protection regulations. We do not expect this compliance to have a significant impact on our capital spending, earnings, or competitive position.

        Prior to introducing a product in the U.S., Bruker AXS provides notice to the Food and Drug Administration, or FDA, in the form of a Radiation Safety Abbreviated Report, which provides identification information and operating characteristics of the product. If the FDA finds that the report is complete, it provides approval in the form of what is known as an accession number. Bruker AXS may not market a product until it has received an accession number. In addition, Bruker AXS submits an annual report to the FDA that includes, among other things, the radiation safety history of all products it sells in the U.S. Bruker AXS is required to report to the FDA incidents of accidental exposure to radiation arising from the manufacture, testing or use of any of its products. Bruker AXS also reports to state governments which products it sells in their states. For sales in Germany, Bruker AXS registers each system with the local authorities. In some countries where Bruker AXS sells systems, Bruker AXS uses the license we obtained from the federal authorities in Germany to assist it in obtaining a license from the country in which the sale occurs. In addition, as indicated above, we are subject to various other foreign and domestic environmental, health and safety laws and regulations in connection with our operations. Apart from these areas, we are subject to the laws and regulations generally applicable to businesses in the jurisdictions in which we operate.

        Bruker AXS possesses low-level radiation materials licenses from the Nuclear Regulatory Commission for its facility in Madison, Wisconsin, from the local radiation safety authority, Gewerbeaufsichtsamt Karlsruhe, for its facility in Karlsruhe, Germany, from the local radiation safety authority, Ministerie van Volkshuisvesting, Ruimtelijke Ordening en Miliuebeheer, for its facility in Delft, the Netherlands, and from the local radiation safety authority, Kanagawa Prefecture, for its facility in Yokohama, Japan, as well as from various other countries in which it sells its products. Bruker Daltonics possesses low-level radiation licenses for facilities in Billerica, MA, U.S.A., and Leipzig, Germany. The U.S. Nuclear Regulatory Commission also has regulations concerning the exposure of our employees to radiation.

25


Working Capital Requirements

        To effectively operate our business, we are required to hold significant demonstration inventory and systems shipped but not yet accepted by the customer, or finished goods in-transit. We have well-equipped application and demonstration facilities and qualified application personnel who assist customers and provide product demonstrations in specific application areas. We maintain our primary demonstration facilities at our production facilities as well as in key markets elsewhere. In total, we held $19.8 million and $14.7 million of demonstration inventory at December 31, 2007 and 2006, respectively. In addition, we recognize revenue from system sales upon customer acceptance. As a result, a significant percentage of our inventory represents systems shipped but not yet accepted by the customer. Such finished goods in-transit were $34.4 million and $24.1 million at December 31, 2007 and 2006, respectively. There are no credit terms extended to customers that would have a material adverse effect on our working capital.

Employees

        As of December 31, 2007 and 2006, we had 2,212 and 1,905 full-time and part-time employees worldwide, respectively. Of these employees, 420 and 373 were located in the United States as of December 31, 2007 and 2006, respectively. The employees based outside the U.S. are located primarily in Europe.

Financial Information about Geographic Areas and Segments

        Financial information about our geographic areas and segments required by Item 1 of Form 10-K may be found in Note 16 to our Financial Statements in this Form 10-K, included as part of Item 8 to this report, which includes information about our revenues from external customers, measure of profit and total assets by reportable segment.

Available Information

        Our website is located at www.bruker.com. We make available free of charge through this website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed with or furnished to the Securities and Exchange Commission pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after they are electronically filed with or furnished to the SEC.

ITEM 1A.    RISK FACTORS

        The following risk factors should be considered in conjunction with the other information included in this Annual Report on Form 10-K. This report may include forward-looking statements that involve risks and uncertainties. In addition to those risk factors discussed elsewhere in this report, we identify the following risk factors, which could affect our actual results and cause actual results to differ materially from those in the forward-looking statements.

We may be unable to integrate successfully the businesses of the Bruker BioSpin Group and the combined company may not realize the anticipated benefits of the acquisition because of integration difficulties and other challenges.

        The success of our combination with the Bruker BioSpin Group will depend, in part, on our ability to realize the anticipated synergies, cost savings and growth opportunities from integrating the business of the Bruker BioSpin Group with the business of Bruker Corporation. Our success in realizing these benefits and the timing of this realization depends upon the successful integration of the operations of the Bruker BioSpin Group. The difficulties of combining the operations of the companies of the

26



Bruker BioSpin Group with those of Bruker Corporation's operating subsidiaries, Bruker AXS, Bruker Daltonics and Bruker Optics, include, among others:

        It is possible that the integration process could result in the loss of key employees, the disruption or interruption of, or the loss of momentum in, the Company's ongoing businesses or inconsistencies in standards, controls, procedures and policies, any of which could adversely affect our ability to maintain relationships with customers and employees or our ability to achieve the anticipated benefits of the combination, or could reduce our earnings or otherwise adversely affect the business and financial results of the combined company.

The Bruker BioSpin Group has always operated as a private company and does not have in place the financial organization, reporting and controls necessary for a public company.

        Since its formation, the recently acquired Bruker BioSpin Group has always operated as a private company. It has never put in place the financial organization, reporting and controls which are required for a U.S. public company. The cost of implementing this type of financial organization, reporting and controls may be significant, and compliance with U.S. public company requirements, including those implemented as part of the Sarbanes-Oxley Act 2002, may have an adverse effect on the operations of the combined company. If those limitations caused us to miss a reporting deadline or otherwise not comply with an applicable law or regulation, we might, among other things, be unable to use a Form S-3 registration statement for twelve months, have a material weakness in our internal controls or violate our bank covenants.

Our Bruker BioSpin subsidiary operates in a mature market and has achieved a high market share and, as a result, the potential for future growth may be limited.

        The markets for NMR, research MRI and EPR are well established. Our Bruker BioSpin subsidiary has high market share and, as a result, future growth may be limited to the growth of the overall market for NMR, research MRI and EPR products. While this growth has been steady when measured over long time periods, future growth may depend on new applications developed by academic and industrial customers, and in most cases is outside our control.

If our products fail to achieve and sustain sufficient market acceptance across their broad intended range of applications, we will not generate expected revenue.

        Our business strategy depends on our ability to successfully commercialize a broad range of products based on mass spectrometry, vibrational spectroscopy, X-ray technology, magnetic resonance core technology and superconducting magnet technology for use in a variety of life science, chemistry and materials analysis applications. Some of our products have only recently been commercially launched and have achieved only limited sales to date. The commercial success of our products depends on our obtaining continued and expanding market acceptance of our products by our diverse industrial, academic, medical research and governmental customers around the world. We may fail to achieve or sustain substantial market acceptance for our products across the full range of our intended applications or in one or more of our principal intended applications. Any such failure could decrease our sales and revenue. To succeed, we must convince substantial numbers of potential customers to

27



invest in new systems or replace their existing techniques with mass spectrometry, vibrational spectroscopy, X-ray and magnetic resonance techniques employing our systems. Limited funding available for capital acquisitions by our customers, as well as our customers' own internal purchasing approval policies, could hinder market acceptance of our products. Our intended customers may be reluctant to make the substantial capital investment generally needed to acquire our products or to incur the training and other costs involved with replacing their existing systems with our products. We also may not be able to convince our intended customers that our systems are an attractive and cost-effective alternative to other technologies and systems for the acquisition, analysis and management of molecular information. Because of these and other factors, our products may fail to gain or sustain market acceptance.

Our products compete in markets that are subject to rapid technological change, and one or more of the technologies underlying our products could be made obsolete by new technology.

        The market for discovery and analysis tools is characterized by rapid technological change and frequent new product introductions. Rapidly changing technology could make some or all of our product lines obsolete unless we are able to continually improve our existing products and develop new products. Because substantially all of our products are based on mass spectrometry, vibrational spectroscopy, X-ray technology, and magnetic resonance technology, we are particularly vulnerable to any technological advances that would make certain of these techniques obsolete as the basis for analytical systems in any of our markets. To meet the evolving needs of our customers, we must rapidly and continually enhance our current and planned products and services and develop and introduce new products and services. In addition, our product lines are based on complex technologies which are subject to rapid change as new technologies are developed and introduced in the marketplace. We may have difficulty in keeping abreast of the rapid changes affecting each of the different markets we serve or intend to serve. If we fail to develop and introduce products in a timely manner in response to changing technology, market demands or the requirements of our customers, our product sales may decline, and we could experience significant losses.

Our debt may adversely affect our cash flow and may restrict our investment opportunities or limit our activities.

        In connection with the Bruker BioSpin acquisition, our overall debt level increased from $38.1 million at December 31, 2007, to approximately $390.0 million at such date on a pro forma basis after giving effect to the financing of the acquisition. Our leverage could have negative consequences, including increasing our vulnerability to adverse economic and industry conditions, limiting our ability to obtain additional financing and limiting our ability to acquire new products and technologies through strategic acquisitions.

        Our ability to satisfy our obligations depends on our future operating performance and on economic, financial, competitive and other factors beyond our control. Our business may not generate sufficient cash flow to meet these obligations. If we are unable to service our debt or obtain additional financing, we may be forced to delay strategic acquisitions, capital expenditures or research and development expenditures. We may not be able to obtain additional financing on terms acceptable to us or at all.

        Additionally, the agreements governing our debt require that we maintain certain financial ratios, and contain affirmative and negative covenants that restrict our activities by, among other limitations, limiting our ability to incur additional indebtedness, make investments, create liens, sell assets and enter into transactions with affiliates. The covenants in our credit agreement include a maximum debt-to-EBITDA ratio and a minimum interest coverage ratio.

        Our ability to comply with these financial restrictions and covenants is dependent on our future performance, which is subject to prevailing economic conditions and other factors, including factors that

28



are beyond our control such as foreign exchange rates and interest rates. Our failure to comply with any of these restrictions or covenants may result in an event of default under the applicable debt instrument, which could permit acceleration of the debt under that instrument and require us to prepay that debt before its scheduled due date.

If we are unable to recover significant development costs of one or more of our products or product lines, our business, results of operations and financial condition may suffer.

        We offer and plan to continue to offer a broad product line and incur and expect to continue to incur substantial expenses for the development of new products and enhanced versions of our existing products. Our business model calls for us to derive a significant portion of our revenues each year from products that did not exist in the previous two years. However, we may experience difficulties which may delay or prevent the successful development, introduction and marketing of new products or product enhancements. The speed of technological change in life science and other related markets we serve may prevent us from successfully marketing some or all of our products for the length of time required to recover their often significant development costs. If we fail to recover the development costs of one or more products or product lines, our business, results of operations and financial condition could be harmed.

We face substantial competition.

        We face substantial competition and we expect that competition in all of our markets will increase further. Currently, our principal competition comes from established companies providing products using existing technologies, including mass spectrometry, X-ray technology, OES technology, vibrational spectroscopy, CBRN detection technologies, TD-NMR technologies and other technologies, which perform many of the same functions for which we market our products. Other companies also may choose to enter our fields in the future. Our competitors may develop or market products that are more effective or commercially attractive than our current or future products or that may render our products obsolete. Competition has in the past and is likely in the future to subject our products to pricing pressure. Many of our competitors have more experience in the market and substantially greater financial, operational, marketing and technical resources than we do which could give them a competitive edge in areas such as research and development, production, marketing and distribution. Our ability to compete successfully will depend, in part, on our ability to develop proprietary products that reach the market in a timely manner and are technologically superior to, less expensive than, or more cost-effective than, other currently marketed products.

Our operations are dependent upon a limited number of suppliers and contract manufacturers.

        We currently purchase components used in our products from a limited number of outside suppliers. Our reliance on a limited number of suppliers could result in time delays associated with redesigning a product due to an inability to obtain an adequate supply of required components and reduced control over pricing, quality and timely delivery. Any of these factors could adversely affect our revenues and profitability. For example, we currently purchase key components used in our mass spectrometry, vibrational spectroscopy and X-ray systems from certain suppliers. In particular, Bruker AXS obtains a sophisticated chip for use in its CCD detectors from Fairchild Imaging which, to Bruker AXS' knowledge, is the only source of a chip of this size and quality. The X-ray microanalysis business of Bruker AXS, which manufactures and sells accessories for electron microscopes, is partially dependent on cooperation from larger manufacturers of electron microscopes. Additionally, Bruker Daltonics purchases certain magnets from a single supplier, Varian/Magnex, and also obtains certain key components for the manufacture of its ion traps from Agilent, the sole supplier of these components. Our Bruker-Quantron subsidiary purchases certain optical detectors from a single supplier, PerkinElmer, Inc., the sole supplier of certain detector components. Bruker Optics purchases its focal plane array detectors from a single supplier, Lockheed Martin Corporation. Similarly, our Bruker

29



BioSpin subsidiary obtains various components from sole or limited source suppliers. There are limited, if any, available alternatives to these suppliers. The existence of shortages of these components or the failure of delivery with regard to these components could have a material adverse effect upon our revenues and margins. In addition, price increases from these suppliers could have a material adverse effect upon our gross margins.

        Because of the scarcity of some components, we may be unable to obtain an adequate supply of components, or we may be required to pay higher prices or to purchase components of lesser quality. Any delay or interruption in the supply of these or other components could impair our ability to manufacture and deliver our products, harm our reputation and cause a reduction in our revenues. In addition, any increase in the cost of the components that we use in our products could make our products less competitive and decrease our gross margins. We may not be able to obtain sufficient quantities of required components on the same or substantially the same terms. Additionally, consolidations among our suppliers could result in other sole source suppliers for us in the future.

Our business could be harmed if our collaborations fail to advance our product development.

        Demand for our products will depend in part upon the extent to which our collaborations with pharmaceutical, biotechnology and proteomics companies are successful in developing, or helping us to develop, new products and new applications for our existing products. In addition, we collaborate with academic institutions and government research laboratories on product development. We have limited or no control over the resources that any collaborator may devote to our products. Any of our present or future collaborators may not perform their obligations as expected. If we fail to enter into or maintain appropriate collaboration agreements, or if any of these events occur, we may not be able to develop some of our new products, which could materially impede our ability to generate revenue or profits.

If we lose our strategic partners, our marketing efforts could be impaired.

        A substantial portion of our sales of selected products consists of sales to third parties who incorporate our products in their systems. These third parties are responsible for the marketing and sales of their systems. We have little or no control over their marketing and sales activities or how they use their resources. Our present or future strategic partners may or may not purchase sufficient quantities of products from us or perform appropriate marketing and sales activities. In addition, if we are unable to maintain our relationships with strategic partners, our business may suffer. Failures by our present or future strategic partners, or our inability to maintain or enter into new arrangements with strategic partners for product distribution, could materially impede the growth of our business and our ability to generate sufficient revenue and profits.

If we are unable to make or complete future mergers, acquisitions or strategic alliances as a part of our growth strategy, or integrate recent or future mergers, acquisitions or strategic alliances, our business development may suffer.

        Our strategy includes potentially expanding our technology base through selected mergers, acquisitions and strategic alliances. In 2005, our indirect subsidiary, Bruker AXS GmbH, acquired Roentec AG, an X-ray microanalysis instrumentation company based in Berlin, Germany, and our direct subsidiary, Bruker AXS Inc., acquired the microanalysis business of Princeton Gamma-Tech Instruments, Inc., a company located in Rocky Hill, New Jersey. The acquired businesses were combined to form a new group within Bruker AXS that focuses on the microanalysis market, a market not previously addressed by Bruker AXS. In 2006, we completed our acquisition of Bruker Optics and Bruker AXS acquired KeyMaster Technologies, Inc., a developer and manufacturer of portable hand-held X-ray fluorescence systems located in Kennewick, Washington. Also in 2006, Bruker AXS GmbH completed two acquisitions, purchasing Socabim SAS, a Paris, France based company

30



focused on advanced X-ray materials research and analysis software, and Quantron GmbH, an optical emission spectroscopy company based in Kleve, Germany. In the first quarter of 2008, we completed the acquisition of the affiliated companies of the Bruker BioSpin Group.

        We may seek to continue to expand our technology base through mergers, acquisitions and strategic alliances. If we fail to effect mergers, acquisitions and strategic alliances, our technology base may not expand as quickly and efficiently as possible. Without such complementary growth from selected mergers, acquisitions and strategic alliances, our ability to keep up with the evolving needs of the markets we serve and to meet our future performance goals could be adversely affected. However, we may not be able to find attractive candidates, or enter into mergers, acquisitions or strategic alliances on terms that are favorable to us, or successfully integrate the operations of companies that we acquire. In addition, we may compete with other companies for these merger, acquisition or strategic alliance candidates, which could make such a transaction more expensive for us. If we are able to successfully identify and complete a merger, acquisition or strategic alliance, it could involve a number of risks, including, among others:

        If we are not able to successfully integrate acquired businesses, we may not be able to realize all of the cost savings and other benefits that we expect to result from the transactions.

Goodwill and other intangible assets are subject to impairment.

        As a result of the merger of Bruker Daltonics and Bruker AXS in July 2003, we recorded goodwill and other intangible assets, which must be periodically evaluated for potential impairment. In addition, our recent acquisitions have resulted in additional goodwill and other intangible assets. We assess the realizability of the reported goodwill and other intangible assets annually, as well as whenever events or changes in circumstances indicate that the assets may be impaired. These events or circumstances generally include operating losses or a significant decline in the earnings associated with the business segment these acquisitions are reported within. Our ability to realize the value of the goodwill will depend on the future cash flows of the business segment in addition to how well we integrate the businesses acquired.

In addition to the risks applicable to our life science and materials analysis products, our CBRN detection products are subject to a number of additional risks, including lengthy product development and contract negotiation periods and certain risks inherent in long-term government contracts.

        Our CBRN detection products are subject to many of the same risks associated with our life science products, including vulnerability to rapid technological change, dependence on mass spectrometry and other technologies and substantial competition. In addition, our CBRN detection

31



products as well as our FT-IR products are generally sold to government agencies under long-term contracts. These contracts generally involve lengthy pre-contract negotiations and product development. We may be required to devote substantial working capital and other resources prior to obtaining product orders. As a result, we may incur substantial costs before we recognize revenue from these products. Moreover, in return for larger, longer-term contracts, our customers for these products often demand more stringent acceptance criteria. These criteria may also cause delays in our ability to recognize revenue from sales of these products. Furthermore, we may not be able to accurately predict in advance our costs to fulfill our obligations under these long-term contracts. If we fail to accurately predict our costs, due to inflation or other factors, we could incur significant losses. Also, the presence or absence of such contracts may cause substantial variation in our results of operations between fiscal periods and, as a result, our results of operations for any given fiscal period may not be predictive of our results for subsequent fiscal periods. The resulting uncertainty may have an adverse impact on our stock price.

If general health care spending patterns decline, our ability to generate revenue may suffer.

        We are dependent, both directly and indirectly, upon general health care spending patterns, particularly in the research and development budgets of the pharmaceutical and biotechnology industries, as well as upon the financial condition and funding priorities of various governments and government agencies. Since our inception, both we and our academic collaborators and customers have benefited from various governmental contracts and research grants. Whether we or our academic collaborators will continue to be able to attract these grants depends not only on the quality of our products, but also on general spending patterns of public institutions.

Any reduction in the capital resources or government funding of our customers could reduce our sales and impede our ability to generate revenue.

        A significant portion of our sales are capital purchases by our customers. The spending policies of our customers could have a significant effect on the demand for our products. These policies are based on a wide variety of factors, including the resources available to make purchases, the spending priorities among various types of equipment, policies regarding spending during recessionary periods and changes in the political climate. Any changes in capital spending or changes in the capital budgets of our customers could significantly reduce demand for our products. The capital resources of our life science and other corporate customers may be limited by the availability of equity or debt financing. Any significant decline in research and development expenditures by our life science customers could significantly decrease our sales. In addition, we make a substantial portion of our sales to non-profit and government entities which are dependent on government support for scientific research. Any decline in this support could decrease the ability of these customers to purchase our products.

We are subject to existing and potential additional regulation and government inquiry, which can impose burdens on our operations and narrow the markets for our products.

        We are subject, both directly and indirectly, to the adverse impact of existing and potential future government regulation of our operations and markets. For example, exportation of our products, particularly our CBRN detection products, is subject to strict regulatory control in a number of jurisdictions. The failure to satisfy export control criteria or obtain necessary clearances could delay or prevent shipment of products, which could adversely affect our revenues and profitability. Moreover, the life sciences industry, which is the market for our principal products, has historically been heavily regulated. There are, for example, laws in several jurisdictions restricting research in genetic engineering, which can operate to narrow our markets. Given the evolving nature of this industry, legislative bodies or regulatory authorities may adopt additional regulation that adversely affects our market opportunities. Additionally, if ethical and other concerns surrounding the use of genetic information, gene therapy or genetically modified organisms become widespread, we may have less

32



demand for our products. Our business is also directly affected by a wide variety of government regulations applicable to business enterprises generally and to companies operating in the life sciences industry in particular. We note that, as a result of developing and selling products which are the subject of such regulation, we have been, are, and expect to be in the future, subject to inquiries from the government agencies which enforce these regulations, including the U.S. Department of State, the U.S. Department of Commerce, the U.S. Food and Drug Administration, the U.S. Internal Revenue Service, the U.S. Department of Homeland Security, the U.S. Department of Justice, the Securities and Exchange Commission, the Federal Trade Commission, the U.S. Customs and Border Protection and the U.S. Department of Defense, among others, as well as from state or foreign governments and their departments and agencies. As a result, from time to time, the attention of our management and other resources may be diverted to attend to these inquiries. In addition, failure to comply with these regulations or obtain or maintain necessary permits and licenses could result in a variety of fines or other censures or an interruption in our business operations which may have a negative impact on our ability to generate revenues. Finally, our compliance with existing regulations, such as the Sarbanes-Oxley Act of 2002, may have a material adverse impact on us. Under Section 404 of Sarbanes-Oxley, we are required to evaluate and determine the effectiveness of our internal control structure and procedures for financial reporting. Compliance with this legislation may divert management's attention and resources and cause us to incur significant expense.

Our success depends on our ability to operate without infringing or misappropriating the proprietary rights of others.

        Our commercial success depends on avoiding the infringement of other parties' patents and proprietary rights as well as avoiding the breach of any licenses relating to our technologies and products. Given that there may be patents of which we are unaware, particularly in the U.S. where patent applications are confidential, avoidance of patent infringement may be difficult. Various third-parties hold patents which may relate to our technology, and we may be found in the future to infringe these or other patents or proprietary rights of third parties, either with products we are currently marketing or developing or with new products which we may develop in the future. If a third party holding rights under a patent successfully asserts an infringement claim with respect to any of our current or future products, we may be prevented from manufacturing or marketing our infringing product in the country or countries covered by the patent we infringe, unless we can obtain a license from the patent holder. We may not be able to obtain a license on commercially reasonable terms, if at all, especially if the patent holder is a competitor. In addition, even if we can obtain the license, it may be non-exclusive, which will permit others to practice the same technology licensed to us. We also may be required to pay substantial damages to the patent holder in the event of an infringement. Under some circumstances in the U.S., these damages could include damages equal to triple the actual damages the patent holder incurs. If we have supplied infringing products to third parties for marketing by them or licensed third parties to manufacture, use or market infringing products, we may be obligated to indemnify these third parties for any damages they may be required to pay to the patent holder and for any losses the third parties may sustain themselves as the result of lost sales or license payments they are required to make to the patent holder. Any successful infringement action brought against us may also adversely affect marketing of the infringing product in other markets not covered by the infringement action, as well as our marketing of other products based on similar technology. Furthermore, we will suffer adverse consequences from a successful infringement action against us even if the action is subsequently reversed on appeal, nullified through another action or resolved by settlement with the patent holder. The damages or other remedies awarded, if any, may be significant. As a result, any successful infringement action against us may harm our business.

33


If we are unable to effectively protect our intellectual property, third parties may use our technology, which would impair our ability to compete in our markets.

        Our continued success will depend in significant part on our ability to obtain and maintain meaningful patent protection for our products throughout the world. We rely on patents to protect a significant part of our intellectual property and to enhance our competitive position. However, our presently pending or future patent applications may not issue as patents, and any patent previously issued to us may be challenged, invalidated, held unenforceable or circumvented. Furthermore, the claims in patents which have been issued, or which may be issued to us in the future, may not be sufficiently broad to prevent third parties from producing competing products similar to our products. In addition, the laws of various foreign countries in which we compete may not protect our intellectual property to the same extent as do the laws of the U.S. Failure to obtain adequate patent protection for our proprietary technology could materially impair our ability to be commercially competitive.

        In addition to patent protection, we also rely on the protection of trade secrets, know-how and confidential and proprietary information. To maintain the confidentiality of trade secrets and proprietary information, we generally seek to enter into confidentiality agreements with our employees, consultants and strategic partners upon the commencement of a relationship with us. However, we may not obtain these agreements in all circumstances. In the event of unauthorized use or disclosure of this information, these agreements, even if obtained, may not provide meaningful protection for our trade secrets or other confidential information. In addition, adequate remedies may not exist in the event of unauthorized use or disclosure of this information. The loss or exposure of our trade secrets and other proprietary information would impair our competitive advantages and could have a material adverse affect on our operating results, financial condition and future growth prospects. Furthermore, others may have, or may in the future independently develop, substantially similar or superior know-how and technology.

We may be involved in lawsuits to protect or enforce our patents that are brought by us which could be expensive and time consuming and, if determined adversely, could adversely affect our patent position.

        In order to protect or enforce our patent rights, we may initiate patent litigation against third parties, and we may be similarly sued by others. We may also become subject to interference proceedings conducted in the patent and trademark offices of various countries to determine the priority of inventions. The defense and prosecution, if necessary, of intellectual property suits, interference proceedings and related legal and administrative proceedings is costly and diverts our technical and management personnel from their normal responsibilities. We may not prevail in any of these suits. An adverse determination of any litigation or defense proceedings could put our patents at risk of being invalidated or interpreted narrowly and could put our patent applications at risk of not issuing.

        Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. In addition, during the course of this kind of litigation, there could be public announcements of the results of hearings, motions or other interim proceedings or developments in the litigation. If securities analysts or investors perceive these results to be negative, it could have a substantial negative effect on the trading price of our common stock.

Our manufacture and sale of products could lead to product liability claims for which we could have substantial liability.

        The manufacture and sale of our products exposes us to product liability claims if any of our products cause injury or are found otherwise unsuitable during manufacturing, marketing, sale or customer use. In particular, if one of our CBRN detection products malfunctions, this could lead to civilian or military casualties in a time of unrest, exposing us to increased potential for high-profile

34



liability. If our CBRN detection products malfunction by generating a false-positive to a potential threat, we could be exposed to liabilities associated with actions taken that otherwise would not have been required. Additionally, the nuclear magnetic resonance, research magnetic resonance imaging, Fourier transform mass spectrometry, and certain electron paramagnetic resonance magnets of the Bruker BioSpin Group utilize high magnet fields and cryogenics to operate at approximately 4 Kelvin, the temperature of liquid helium. There is an inherent risk of potential product liability due to the existence of these high magnetic fields, associated stray fields outside the magnet, and the handling of the cryogens associated with superconducting magnets.

        A successful product liability claim brought against us in excess of, or outside the coverage of, our insurance coverage could have a material adverse effect on our business, financial condition and results of operations. We may not be able to maintain product liability insurance on acceptable terms, if at all, and insurance may not provide adequate coverage against potential liabilities.

Responding to claims relating to improper handling, storage or disposal of hazardous chemicals and radioactive and biological materials which we use could be time consuming and costly.

        We use controlled hazardous and radioactive materials in our business and generate wastes that are regulated as hazardous wastes under United States federal, and Massachusetts, California and Wisconsin state, environmental and atomic energy regulatory laws and under equivalent provisions of law in those jurisdictions in which our research and manufacturing facilities are located. Our use of these substances and materials is subject to stringent, and periodically changing, regulation that can impose costly compliance obligations on us and have the potential to adversely affect our manufacturing activities. The risk of accidental contamination or injury from these materials cannot be completely eliminated. If an accident with these substances occurs, we could be held liable for any damages that result, in addition to incurring clean-up costs and liabilities, which can be substantial. Additionally, an accident could damage our research and manufacturing facilities resulting in delays and increased costs.

We are dependent upon various key personnel and must recruit additional qualified personnel for a number of management positions.

        Our success is highly dependent on the continued services of key management, particularly our chief executive officer, Frank H. Laukien, as well as technical and scientific personnel. Our management and other employees may voluntarily terminate their employment with us at any time upon short notice. The loss of the services of any member of our senior management, technical or scientific staff may significantly delay or prevent the achievement of product development and other business objectives. Our future success will also depend on our ability to identify, recruit and retain additional qualified scientific, technical and managerial personnel. Competition for qualified personnel is intense, particularly in the areas of information technology, engineering and science, and the process of hiring suitably qualified personnel is often lengthy. If we are unable to hire and retain a sufficient number of qualified employees, our ability to conduct and expand our business could be seriously reduced.

We may not be able to maintain our sales and service staff to meet demand for our products and services.

        We need to expand our direct marketing and sales force as well as our service and support staff. Our future revenue and profitability will depend in part on our ability to maintain our team of marketing and service personnel. Because our products are technical in nature, we believe that our marketing, sales and support staff must have scientific or technical expertise and experience. Competition for employees with these skills is intense. We may not be able to continue to attract and retain sufficient qualified sales and service people, and we may not be able to maintain and develop an

35



efficient and effective sales, marketing and support department. If we fail to continue to attract or retain qualified people, then our business could suffer.

We plan significant growth, and there is a risk that we will not be able to manage this growth.

        Our success will depend on the expansion of our operations. Effective growth management will place increased demands on our management, operational and financial resources. To manage our growth, we must expand our facilities, augment our operational, financial and management systems, and hire and train additional qualified personnel. Our failure to manage this growth effectively could impair our ability to generate revenue or could cause our expenses to increase more rapidly than revenue, resulting in operating losses.

We derive a significant portion of our revenue from international sales and are subject to the risks of doing business in foreign countries.

        International sales account and are expected to continue to account for a significant portion of our total revenues. Our international operations are, and will continue to be, subject to a variety of risks associated with conducting business internationally, many of which are beyond our control. These risks, which may adversely affect our ability to achieve and maintain profitability and our ability to sell our products internationally, include:

        While the impact of these factors is difficult to predict, any one or more of these factors could adversely affect our operations in the future.

We may lose money when we exchange foreign currency received from international sales into U.S. dollars.

        A significant portion of our business is conducted in currencies other than the U.S. dollar, which is our reporting currency. As a result, currency fluctuations among the U.S. dollar and the currencies in which we do business have caused and will continue to cause foreign currency transaction gains and losses. We recognize foreign currency gains or losses arising from our operations in the period incurred. In addition, currency fluctuations could cause the price of our products to be more or less competitive than our principal competitors' products. Currency fluctuations will increase or decrease our cost structure relative to those of our competitors which could lessen the demand for our products and affect our competitive position. We cannot predict the effects of exchange rate fluctuations upon our future operating results because of the number of currencies involved, the variability of currency exposures and the potential volatility of currency exchange rates. From time to time we enter into

36



certain hedging transactions and/or option and foreign currency exchange contracts which are intended to offset some of the market risk associated with our sales denominated in foreign currencies. We cannot predict the effectiveness of these transactions or their impact upon our future operating results, and from time to time they may negatively affect our quarterly earnings.

Various international tax risks could adversely affect our earnings.

        We are subject to international tax risks. Distributions of earnings and other payments received from our subsidiaries may be subject to withholding taxes imposed by the countries where they are operating or are formed. If these foreign countries do not have income tax treaties with the United States or the countries where our subsidiaries are incorporated, we could be subject to high rates of withholding taxes on these distributions and payments. We could also be subject to being taxed twice on income related to operations in these non-treaty countries. Because we are unable to reduce the taxable income of one operating company with losses incurred by another operating company located in another country, we may have a higher foreign effective income tax rate than that of other companies in our industry. The amount of the credit that we may claim against our U.S. federal income tax for foreign income taxes is subject to many limitations which may significantly restrict our ability to claim a credit for all of the foreign taxes we pay.

        We currently have reserves established on the statutory books of certain international locations. Within our audited consolidated financial statements, which have been prepared under U.S. generally accepted accounting principles, the potential tax liabilities associated with these reserves have been recorded as long-term deferred tax liabilities. If these reserves are challenged, and we are unable to successfully defend the need for such reserves, these liabilities could become current resulting in a negative impact to our anticipated cash flows from operations over the next twelve months.

Armed hostilities could constrain our ability to conduct business internationally and could also disrupt our U.S. operations.

        The current world unrest, or the responses of the United States, may lead to further acts of terrorism and civil disturbances in the United States or elsewhere, which may further contribute to the economic instability in the United States. These attacks or armed conflicts may affect our physical facilities or those of our suppliers or customers and could have an impact on our domestic and international sales, our supply chain, our production capability, our insurance premiums or the ability to purchase insurance and our ability to deliver our products to our customers. The consequences of these risks are unpredictable, and their long-term effect upon us is uncertain.

Increasing prices of metal raw materials and superconducting wire could adversely affect the gross margins and profitability of our Bruker BioSpin subsidiary and its superconducting wire business.

        The last few years have seen sharp increases in the prices for various raw materials, in part due to high demand from developing countries. The Bruker BioSpin Group relies on some of these materials for the production of its products. In particular, for its superconducting magnet production, both for the horizontal and vertical magnet series, the Bruker BioSpin Group relies on the availability of copper, steel and the metallic raw materials for traditional low-temperature superconducting wires. Higher prices for these commodities will increase the production cost of superconducting wires and superconducting magnets and may adversely affect gross margins.

        The price of copper has increased significantly over the last decade. Since copper is a main constituent of low temperature superconductors, this may affect the price of superconducting wire. This type of increase would have an immediate effect on the production costs of superconducting magnets and may negatively affect the profit margins for those products. In addition, an increase in raw material cost affects the production cost of the superconducting wire produced by the Bruker BioSpin Group.

37


The emerging risk of liquid helium becoming scarce and significantly more expensive could dampen the demand for NMR and research MRI products.

        The demand for helium has risen sharply over the last decade. The superconducting magnets used in magnetic resonance rely on liquid helium for their operation. The high global demand, in combination with a shortage in supply, has caused prices for liquid helium to rise significantly. This has an adverse effect on the operating costs for magnetic resonance equipment, and may dampen demand for NMR, EPR and research MRI magnets in the future.

The unpredictability and fluctuation of our quarterly results may adversely affect the trading price of our common stock.

        Our revenues and results of operations have in the past and may in the future vary from quarter to quarter due to a number of factors, many of which are outside of our control and any of which may cause our stock price to fluctuate. The primary factors that may affect us include the following:

        Historically, we have experienced a decrease in revenue in the first, second and third quarters of each fiscal year relative to the prior fourth quarter, which we believe is due to our customers' budgeting cycles. These seasonal fluctuations may increase in the future as a result of the acquisition of the Bruker BioSpin Group in February 2008. You should not rely on quarter-to-quarter comparisons of our results of operations as an indication of our future performance. It is likely that in some future quarters, our results of operations may be below the expectations of public market analysts and investors. In this event, the price of our common stock may fall.

Existing stockholders have significant influence over us.

        As of March 1, 2008, our majority stockholders, including our President and Chief Executive Officer Frank Laukien, Director and Senior Vice President Dirk Laukien and Director and European Chief Operating Officer Joerg Laukien, owned in the aggregate, approximately 69% of our outstanding common stock. As a result, these stockholders will be able to exercise substantial influence over all matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. This could have the effect of delaying or preventing a change in control of our company and will make some transactions difficult or impossible to accomplish without the support of these stockholders.

Other companies may have difficulty acquiring us, even if doing so would benefit our stockholders, due to provisions under our corporate charter and bylaws, as well as Delaware law.

        Provisions in our certificate of incorporation, as amended, and our bylaws, as well as Delaware law could make it more difficult for other companies to acquire us, even if doing so would benefit our

38



stockholders. Our certificate of incorporation, as amended, and bylaws contain the following provisions, among others, which may inhibit an acquisition of our company by a third party:


ITEM 1B.    UNRESOLVED STAFF COMMENTS

        We have not received any written comments from the staff of the Securities and Exchange Commission regarding our periodic or current reports that (1) we believe are material, (2) were issued not less than 180 days before the end of our 2007 fiscal year, and (3) remain unresolved.

ITEM 2.    PROPERTIES

        The location and general character of our principal properties by reportable segment as of December 31, 2007 are as follows:

Bruker AXS

        Bruker AXS' six principal facilities are in Karlsruhe, Berlin and Kalkar, Germany, Madison, Wisconsin, USA, and Kennewick, Washington, USA, and Yokohama, Japan. These facilities, which incorporate manufacturing, research and development, application and demonstration, marketing and sales and administration functions for the analytical X-ray business of Bruker AXS, include:


        We lease additional centers for sales, applications and service support in: Delft, The Netherlands (Bruker AXS B.V.); Coventry, United Kingdom (Bruker AXS Ltd.); Paris, France (Bruker AXS SAS); Salzburg, Austria (Bruker Austria GmbH); Milan, Italy (Bruker AXS S.r.l.); Geesthacht, Germany (InCoaTec GmbH); Poznan, Poland (Bruker Polska Sp. Zo.o.); Lidingo, Sweden (Bruker AXS Nordic AB); Johannesburg, South Africa (Bruker South Africa (Pty) Ltd.); São Paulo, Brazil (Bruker do Brasil Ltda.); Mexico City, Mexico (Bruker Mexicana S.A. de C.V.); Singapore (Bruker AXS Pte Ltd); Riga, Latvia (Bruker Baltic Ltd.); and Beijing, People's Republic of China (Bruker AXS Representative Office).

Bruker Daltonics

        Bruker Daltonics' three principal facilities are located in Billerica, Massachusetts USA, Bremen, Germany and Leipzig, Germany. These facilities, which incorporate manufacturing, research and development, application and demonstration, marketing and sales and administration functions for the mass spectrometry and CBRN detection businesses of Bruker Daltonics, include:

39


        We lease additional centers for sales, applications and service support in Fremont, California; Coventry, United Kingdom (Bruker Daltonics Ltd.); Wissembourg, France (Bruker Daltonique S.A.); Stockholm, Sweden (Bruker Daltonics Scandinavia AB); Faellanden, Switzerland (Bruker Daltonics GmbH); Yokohama, Japan (Bruker Daltonics K.K.); Beijing, People's Republic of China (Bruker Daltonics China Branch); Taipei, Taiwan (Bruker Daltonics Taiwan Branch); Ontario, Canada (Bruker Daltonics LTD); Milan, Italy (Bruker Daltonics S.r.l); Alexandria, Australia (Bruker BioSicences Pty. Ltd.); Singapore (Bruker Daltonics Pte Ltd); Bruxelles, Belgium (Bruker Daltonics SPRL/BVBA); Seoul, South Korea (Bruker Biosciences Korea Co., Ltd.); Madrid, Spain (Bruker BioSciences Espanola, S.A.); and Wormer, Netherlands (Bruker Daltonics BV).

Bruker Optics

        Bruker Optics' three principal facilities are in Ettlingen, Germany, Billerica, Massachusetts, USA, and The Woodlands, Texas, USA. These facilities, which incorporate manufacturing, research and development, application and demonstration, marketing and sales and administration functions for the business of Bruker Optics, include:

        Bruker Optics leases its facilities in Billerica, Massachusetts and The Woodlands, Texas from a principal stockholder under various lease agreements.

        Bruker Optics began an expansion of its facility in Ettlingen, Germany that will add approximately 90,000 square feet to the facility. At completion the expanded facility will consist of approximately 165,000 square feet. We expect the expansion project to be completed in second quarter of 2008.

        We lease additional centers for sales, applications and service support in: Paris, France (Bruker Optique SA.); Stockholm, Sweden (Bruker Optics AB); Milan, Italy (Bruker Optics S.r.l); Faellanden, Switzerland (Bruker Optics GmbH); Ontario, Canada (Bruker Optics Ltd.); Kowloon, Hong Kong (Bruker Optik Asia Pacific Limited); Beijing, People's Republic of China (Bruker Instruments Ltd.); Shanghai, People's Republic of China (Bruker Optics Shanghai Branch); Taipei, Taiwan (Bruker Optics Taiwan Ltd.); Bangkok, Thailand (Bruker Optics Thailand Branch); Coventry, United Kingdom (Bruker Optics Ltd.); Tokyo, Japan (Bruker Optics K.K.); Wormer, Netherlands (Bruker Optics B.V.); Singapore (Bruker Optik Southeast Asia Pte Ltd); and Seoul, South Korea (Bruker Optics Korea).

ITEM 3.    LEGAL PROCEEDINGS

        On October 10, 2007, Brian Lamy, a former employee of Bruker BioSpin Corporation, filed a complaint with the United States Department of Labor alleging discriminatory employment practices in violation of Section 806 of the Sarbanes-Oxley Act arising from Bruker BioSpin Corporation's termination of his employment in July 2007. At the time of the complaint, Bruker BioSpin Corporation was an affiliate of the Company under common control with the Company. As a result of the Company's acquisition of the Bruker BioSpin group of companies, Bruker BioSpin Corporation is now a wholly-owned subsidiary of the Company.

40


        In his complaint, Mr. Lamy alleges that his employment was terminated in retaliation for reporting to management suspected financial irregularities at the Company. On November 30, 2007, Bruker BioSpin Corporation filed a position statement with the OSHA Division of the U.S. Department of Labor, which is conducting a preliminary investigation of Mr. Lamy's claims. Mr. Lamy has also contacted the Securities and Exchange Commission regarding his complaint. The SEC contacted counsel for the Company in February 2008 regarding this matter. Counsel for the Company has provided the SEC various materials relating to the matter, and the Company intends to cooperate fully with any additional requests that may be made by the SEC for information or documents relating to the allegations in the complaint.

        The Audit Committee of the Company has conducted an internal review with respect to Mr. Lamy's claims and has found no evidence of any improper activity. The Company believes the allegations to be without merit and intends to defend the matter vigorously.

ITEM 4.    SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

        There were no matters submitted to a vote of our security holders during the fourth quarter of our fiscal year ended December 31, 2007.


PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Prices

        Our common stock is now traded on the Nasdaq Global Select Market under the symbol "BRKR." The following table sets forth, for the period indicated, the high and low sale prices for our common stock as reported on the Nasdaq Global Select Market or its predecessor:

 
  High
  Low
First Quarter 2007   $ 10.90   $ 7.07
Second Quarter 2007   $ 11.56   $ 8.08
Third Quarter 2007   $ 9.29   $ 6.30
Fourth Quarter 2007   $ 13.49   $ 8.42
 
First Quarter 2006   $ 5.45   $ 4.24
Second Quarter 2006   $ 6.26   $ 4.52
Third Quarter 2006   $ 7.33   $ 5.19
Fourth Quarter 2006   $ 8.47   $ 6.70

        As of March 10, 2008, there were approximately 116 holders of record of our common stock. This number does not include the individual beneficial owners of shares held in nominee name or within clearinghouse positions of brokerage firms and banks. The official close price per share of our common stock on March 10, 2008, as reported by the Nasdaq Global Select Market, was $14.37.

Dividends

        We have never declared or paid cash dividends on our capital stock. We currently anticipate that we will retain all available funds for use in our business and do not anticipate paying any cash dividends in the foreseeable future. The terms of certain of our outstanding indebtedness restrict our ability to pay cash dividends.

41


Recent Sales of Unregistered Securities

        There were no unregistered sales of equity securities during the year ended December 31, 2007. We previously reported sales of our unregistered common stock during years ended December 31, 2006 and 2005, in our Current Reports on Form 8-K. The foregoing sales were exempt from registration under the Securities Act of 1933, as amended, pursuant to Section 4(2) thereof, on the basis that the transactions did not involve a public offering.

Issuer Purchases of Equity Securities

        There were no purchases made by or on behalf of the Company or any "affiliated purchaser," as defined in Rule 10b-18(a)(3) under the Exchange Act, of shares of our common stock during the fourth quarter of 2007.

42


Stock Price Performance Graph

        The graph below shows the cumulative total stockholder return, assuming the investment of $100 (and the reinvestment of any dividends thereafter) for the period beginning on December 31, 2002 and ending on December 31, 2007, for our common stock, stocks traded on Nasdaq and a peer group consisting of companies traded on Nasdaq with Standard Industry Classification (SIC) codes from 3800 to 3899, representing measuring instruments, photo, medical and optical goods, and timepieces. The stock price performance of Bruker Corporation shown in the following graph is not indicative of future stock price performance.

GRAPHIC

        The data for this performance graph was complied by the Center for Research in Security Prices, Graduate School of Business, The University of Chicago and is used with their permission.

43



ITEM 6.    SELECTED FINANCIAL DATA

        On July 1, 2006, we completed our acquisition of Bruker Optics. Both the Company and Bruker Optics were majority owned by five affiliated stockholders prior to the acquisition. As a result, our acquisition of Bruker Optics is considered a business combination of companies under common control. See Note 3 to our consolidated financial statements in Item 8 of this report of Form 10-K. The consolidated statements of operations data for each of the years ended December 31, 2007, 2006 and 2005, and the consolidated balance sheet data as of December 31, 2007 and 2006, have been derived from our audited financial statements included in Item 8 of this report. The combined statements of operations data and combined balance sheet data for all other periods presented has been derived by combining amounts from Bruker Corporation and Bruker Optics historical audited financial statements.

        The data presented below has been derived from financial statements that have been prepared in accordance with accounting principles generally accepted in the United States and should be read with the consolidated and combined financial statements and schedules, including the notes, and "Management's Discussion and Analysis of Financial Condition and Results of Operations" included elsewhere in this report.

 
  Year Ended December 31,
 
 
  2007
  2006
  2005
  2004
  2003
 
 
  (In thousands, except per share data)

 
Combined/Consolidated Statements of Operation Data:                                
Product and service revenue   $ 546,706   $ 434,478   $ 369,923   $ 354,650   $ 318,530  
Other revenue     870     1,356     2,330     2,339     1,438  
Total revenue     547,576     435,834     372,253     356,989     319,968  
Total costs and operating expenses     497,609     405,172     349,831     350,395     325,645  
Operating income (loss)     49,967     30,662     22,422     6,594     (5,677 )
Net income (loss) available to common shareholders     31,529     18,481     9,747     (3,855 )   (15,446 )
Net income (loss) per share available to common shareholders—basic and diluted   $ 0.30   $ 0.18   $ 0.10   $ (0.04 ) $ (0.17 )

        During 2007, we recorded acquisition related charges of $4.7 million in connection with the acquisition of the Bruker BioSpin Group, stock-based compensation expense of $2.2 million and a tax benefit of $3.7 million related to a tax law change enacted in Germany. During 2006, we recorded net gains on derivatives of $4.7 million, Bruker Optics acquisition related charges of $5.7 million and stock-based compensation expense of $1.5 million. During 2005, we recorded losses on derivatives of $2.8 million. During 2004, we recorded charges of $2.3 million to write-off investments in other companies. During 2003, we recorded special charges of $11.7 million in connection with the merger with Bruker AXS.

 
  As of December 31,
 
  2007
  2006
  2005
  2004
  2003
 
  (In thousands)

Combined/Consolidated Balance Sheet Data:                              
Cash, cash equivalents and short-term investments   $ 72,876   $ 52,147   $ 109,051   $ 86,564   $ 82,207
Working capital     142,677     99,616     167,390     176,034     154,518
Total assets     553,213     433,187     423,642     428,717     401,703
Total debt     38,110     44,720     34,634     47,836     51,704
Other long-term liabilities     35,207     23,730     21,306     21,785     19,936
Total shareholders' equity     258,659     191,466     229,407     235,540     215,134

44


ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

        The following Management's Discussion and Analysis, or MD&A, describes the principal factors affecting the results of operations, financial condition and changes in financial condition, as well as our critical accounting policies and estimates. Our MD&A is organized as follows:

EXECUTIVE OVERVIEW

        Bruker Corporation and its wholly-owned subsidiaries design, manufacture, market and service proprietary life science and materials research systems based on mass spectrometry core technology platforms, X-ray technologies, optical emission spectroscopy (OES), and molecular spectroscopy technologies. We also manufacture and distribute a broad range of field analytical systems for chemical, biological, radiological and nuclear, or CBRN, detection. Our financial results as of December 31, 2007, are reported on the basis of three reportable segments: Bruker AXS, Bruker Daltonics and Bruker Optics. Following the recent acquisition of the Bruker BioSpin Group management will reevaluate the way the business is managed and the internal reporting structure. The changes in the internal reporting structure may require us to change our segment reporting in the future.

        On February 26, 2008, we completed our of the Bruker BioSpin Group. Both the Company and the Bruker BioSpin Group were majority owned by six affiliated stockholders prior to the acquisition. As a result, our acquisition of the Bruker BioSpin Group is considered a combination of companies under common control, and will be accounted for at historical carrying values. Historical consolidated balance sheets, statements of operations, statements of cash flows and notes to the consolidated financial statements in future filings with the Securities and Exchange Commission, beginning with the Company's Quarterly Report on Form 10-Q for the period ending March 31, 2008, will be restated by combining the historical consolidated financial statements of Bruker Corporation with those of the Bruker BioSpin Group. In addition, because the transaction is accounted for as an acquisition of businesses under common control all one-time transaction costs have been expensed as incurred, rather than being added to goodwill. During the year ended December 31, 2007, we incurred and expensed acquisition related charges totaling $4.7 million, which consisted of legal fees, investment banking, accounting fees, compensation earned by the special committee of the Company's Board of Directors

45



and antitrust regulation filing fees. We expect to incur an additional $3.1 million of acquisition related charges, consisting primarily of investment banking fees, in the first quarter of 2008.

        With the addition of the Bruker BioSpin Group, we enhanced our position as a leading supplier for life science and materials research. The technologies of the Bruker BioSpin Group are particularly complementary to the accurate-mass electrospray time-of-flight mass spectrometers of Bruker Daltonics and the single-crystal diffraction X-ray spectrometers of Bruker AXS which will create revenue synergies and provide opportunities to supply customers with equipment packages that have a broader range of applications and value. We believe the addition of the Bruker BioSpin Group will also enhance our distribution in the Americas, Europe and Asia and our sales and service infrastructure, all of which should provide us with revenue growth opportunities and accelerate our drive to improve our margins, net income and operating cash flows.

        On July 1, 2006, we completed our acquisition of Bruker Optics. Both the Company and Bruker Optics were majority owned by five affiliated stockholders prior to the acquisition. As a result, our acquisition of Bruker Optics is considered a business combination of companies under common control. Accordingly, the acquisition of Bruker Optics, as it relates to the portion under common ownership (approximately 96%), has been accounted for at historical carrying values. The portion not under the common ownership of the five affiliated stockholders (approximately 4%) has been accounted for using the purchase method of accounting (fair value) on a pro rata basis. The excess purchase price of the interest not under common control over the fair value of the related net assets acquired has been accounted for as goodwill and intangible assets. Because the acquisition was accounted for as a combination of companies under common control, all one-time transaction costs have been expensed as incurred rather than being added to goodwill. During the year ended December 31, 2006, we incurred and expensed acquisition related charges totaling $5.7 million, which consisted of investment banking, legal and accounting fees, compensation earned by the special committee of the Company's Board of Directors and a Bruker Optics officer, and antitrust regulation filing fees. The historical financial statements within this MD&A have been presented as if the companies had always been combined.

        With the addition of Bruker Optics, we increased and diversified our market presence, technology base, product line, global distribution and customer support capabilities. The addition of Bruker Optics increased our 'critical mass' in many of the markets we serve, created revenue synergies, diversified our customer and revenue base and expanded our product and service offerings, providing us with revenue growth opportunities, as well as opportunities to improve our margins, net income and operating cash flows. The acquisition of Bruker Optics also provides us with access to new market segments and applications, particularly in pharmaceutical process analytical technologies and pharma-forensics, as well as in food and beverage and feed and agricultural analysis.

        In addition to Bruker Optics, we acquired KeyMaster Technologies, Inc. in July 2006 and Quantron GmbH in September 2006. KeyMaster provided us with access to the fast growing handheld portable X-ray analysis market. We believe the technologies KeyMaster has developed, and the markets it serves, are highly complementary to our core business. Quantron complements our existing stationary X-ray fluorescence systems for metal foundries, as well as our handheld X-ray fluorescence product line. The operating results of KeyMaster and Quantron have been included in the results of the Bruker AXS segment from the date of their acquisitions.

        Bruker AXS engages primarily in the business of manufacturing and distributing advanced instrumentation and automated solutions based on X-ray technology and OES-spark with the purpose of addressing the needs of our customers in the discovery of new drugs, drug targets and advanced materials, as well as individual QA/QC applications. Typical customers of Bruker AXS' products and solutions include biotechnology and pharmaceutical companies, semiconductor industries, chemical, cement, metals and petroleum companies, raw material manufacturers, and academic and government research institutions. Bruker Daltonics is a leading manufacturer of innovative mass spectrometry-based

46


instruments and accessories used by pharmaceutical, biotechnology, proteomics and molecular diagnostic companies, academic institutions, and government agencies in their research that can also be integrated and used along with other analytical instruments. Bruker Daltonics also manufactures and distributes a broad range of field analytical systems for CBRN detection. Bruker Optics is a leading developer, manufacturer and provider of research, analytical and process analysis instruments and solutions based on infrared and Raman molecular spectroscopy technology. Typical customers of Bruker Optics' products and solutions include pharmaceutical and biotechnology companies, cement and petroleum companies, food, beverage and agricultural industries, and academic and government research institutions.

        We maintain major technical and manufacturing centers in Europe, North America and Japan, we have sales offices located throughout the world and our corporate headquarters are located in Billerica, Massachusetts. Our business strategy is to capitalize on our proven ability to innovate and generate rapid revenue growth, both organically and through acquisitions. Our revenue growth strategy combined with continued improvements to our gross profit margins and increased leverage on our research and development, sales and marketing and distribution investments and general and administrative expenses are expected to enhance our operating margins and improve our earnings in the future.

        For the year ended December 31, 2007, our revenue grew by approximately 26% to $547.6 million. Of this revenue growth, approximately 17% was organic, 7% was the impact of foreign exchange and the remaining 2% was due to acquisitions. We continue to focus on improving our profitability and our gross profit margins for product and service revenues improved from 45.6% in 2006 to 46.2% in 2007, reflecting improvements realized from ongoing gross profit margin improvement programs. We continue to invest in sales and marketing initiatives and research and development, primarily headcount increases and material purchases, which have increased sales and marketing and research and development costs year-over-year. We expect these investments to result in increased revenues in future periods.

        We adopted Financial Accounting Standards Board ("FASB") Statement of Financial Accounting Standards ("SFAS") No. 123(R), Share-Based Payment ("SFAS No. 123(R)"), on January 1, 2006. This standard revised the measurement, valuation and recognition of financial accounting and reporting standards for equity-based compensation plans contained in SFAS No. 123, Accounting for Stock-Based Compensation. SFAS No. 123(R) requires the measurement and recognition of compensation expense for all share-based payment awards, including employee stock options, based on estimated fair values on the date of the grant. We adopted SFAS No. 123(R) using the modified prospective transition method. In accordance with the modified prospective transition method, our consolidated financial statements for prior periods have not been restated to reflect, and do not include, the impact of SFAS No. 123(R). For the years ended December 31, 2007 and 2006, we recorded stock-based compensation expense of $1.6 million and $1.1 million, net of tax, respectively. Stock-based compensation was not material to the overall results of operations or specific line items within the consolidated statements of operations in any of the periods presented.

CRITICAL ACCOUNTING POLICIES

        The discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires that we make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the financial statements and reported amounts of revenues and expenses during the reporting period. On an ongoing basis, management evaluates its estimates and judgments, including those related to revenue recognition, allowance for doubtful accounts, inventories, goodwill, long-lived assets, warranty costs and income taxes. We base our estimates and judgments on historical experience, current market and economic

47



conditions, industry trends and other assumptions that we believe are reasonable and form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results could differ from these estimates.

        We believe the following critical accounting policies to be both those most important to the portrayal of our financial condition and those that require the most subjective judgment.

        Revenue recognition.    We recognize revenue from system sales when persuasive evidence of an arrangement exists, the price is fixed or determinable, title and risk of loss has been transferred to the customer and collectibility of the resulting receivable is reasonably assured. Title and risk of loss is generally transferred to the customer upon receipt of a signed customer acceptance form for a system that has been shipped, installed, and for which the customer has been trained. As a result, the timing of customer acceptance or readiness could cause our reported revenues to differ materially from expectations. When products are sold through an independent distributor, a strategic distribution partner or an unconsolidated affiliated distributor, which assumes responsibility for installation, we recognize the system sale when the product has been shipped and title and risk of loss have been transferred. Our distributors do not have price protection rights or rights of return; however, our products are typically warranted to be free from defect for a period of one year. Revenue is deferred until cash is received when a significant portion of the fee is due over one year after delivery, installation and acceptance of a system. For arrangements with multiple elements, we recognize revenue for each element based on the fair value of the element, provided all other criteria for revenue recognition have been met. The fair value for each element provided in multiple element arrangements is typically determined by referencing historical pricing policies when the element is sold separately. Changes in our ability to establish the fair value for each element in multiple element arrangements could affect the timing of revenue recognition. Revenue from accessories and parts is recognized upon shipment and service revenue is recognized as the services are performed. Grant revenue is recognized when we complete the services required under the grant.

        Warranty costs.    We normally provide a one-year parts and labor warranty with the purchase of equipment. The anticipated cost for this one-year warranty is accrued upon recognition of the sale and is included as a current liability on the balance sheet. Although our facilities undergo quality assurance and testing procedures throughout the production process, our warranty obligation is affected by product failure rates, material usage and service delivery costs incurred in correcting a product failure. Although our actual warranty costs have historically been consistent with expectations, to the extent warranty claim activity or costs associated with servicing those claims differ from our estimates, revisions to the warranty accrual may be required.

48


        Inventories.    Inventories are stated at the lower of cost or market, with costs determined by the first-in, first-out method for a majority of subsidiaries and by average-cost for one international location. We maintain an allowance for excess and obsolete inventory to reflect the expected un-saleable or un-refundable inventory based on an evaluation of slow moving products. If ultimate usage or demand varies significantly from expected usage or demand, additional write-downs may be required, resulting in a charge to operations.

        Goodwill, other intangible assets and other long-lived assets.    We evaluate whether goodwill is impaired annually and when events occur or circumstances change that would more likely than not reduce the fair value of a reporting unit below its carrying amount. Fair value is determined using market comparables for similar businesses or forecasts of discounted future cash flows. We also review other intangible assets and other long-lived assets when indication of potential impairment exists, such as a significant reduction in cash flows associated with the assets. Should the fair value of our long-lived assets decline because of reduced operating performance, market declines, or other indicators of impairment, a charge to operations for impairment may be necessary.

        Allowance for doubtful accounts.    We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to pay amounts due. If the financial condition of our customers were to deteriorate, reducing their ability to make payments, additional allowances would be required, resulting in a charge to operations.

        Income taxes.    We estimate the degree to which tax assets and loss carryforwards will result in a benefit based on expected profitability by tax jurisdiction, and provide a valuation allowance for tax assets and loss carryforwards that we believe will more likely than not go unused. If it becomes more likely than not that a tax asset or loss carryforward will be used for which a reserve has been provided, we reverse the related valuation allowance. If our actual future taxable income by tax jurisdiction differ from estimates, additional allowances or reversals of reserves may be necessary.

RESULTS OF OPERATIONS

Revenue

        The following table presents revenue, changes in revenue and revenue growth by reportable segment for the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
  $ Change
  Percentage Change
 
Bruker AXS   $ 243,987   $ 179,502   $ 64,485   35.9 %
Bruker Daltonics     188,604     159,744     28,860   18.1 %
Bruker Optics     122,493     105,530     16,963   16.1 %
Eliminations (a)     (7,508 )   (8,942 )   1,434      
   
 
 
     
Total   $ 547,576   $ 435,834   $ 111,742   25.6 %
   
 
 
     

(a)
represents product and service revenues between reportable segments.

Bruker AXS

        Bruker AXS' revenue increased by $64.5 million, or 35.9% to $244.0 million for the year ended December 31, 2007, compared to $179.5 million for the comparable period in 2006. Included in this change in revenue is approximately $10.6 million from the impact of foreign exchange. Excluding the effect of foreign exchange, revenue increased 30.0%. The increase in revenue excluding the effect of

49



foreign exchange is attributable to an increase in x-ray diffraction and x-ray fluorescence system sales, to higher other system revenue and higher aftermarket revenue, and to the businesses acquired in the second half of 2006, which represented approximately 4.9% of revenue growth. Other systems revenues relate primarily to the distribution of products not manufactured by Bruker AXS. X-ray systems, other system and aftermarket revenue as a percentage of Bruker AXS' product and service revenue were as follows during the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
 
 
  Revenue
  Percentage of Segment Product and Service Revenue
  Revenue
  Percentage of Segment Product and Service Revenue
 
X-Ray Systems   $ 162,543   66.6 % $ 124,635   69.4 %
Other System Revenue     21,788   8.9 %   7,581   4.2 %
Bruker AXS Aftermarket     59,656   24.5 %   47,286   26.4 %
   
     
     
Total Product and Service Revenue   $ 243,987   100.0 % $ 179,502   100.0 %
   
     
     

Bruker Daltonics

        Bruker Daltonics' revenue increased by $28.9 million, or 18.1% to $188.6 million for the year ended December 31, 2007, compared to $159.7 million for the comparable period in 2006. Included in this change in revenue is approximately $11.8 million from the impact of foreign exchange. Excluding the effect of foreign exchange, revenue increased 10.7%. The increase in revenue excluding the effect of foreign exchange is a result of increased direct sales of life science systems and CBRN detection systems, partially offset by reduced OEM sales for certain life science systems and reduced grant revenue. Aftermarket revenues include accessory sales, consumables, training and services. Life science systems, CBRN detection systems and aftermarket revenue as a percentage of Bruker Daltonics' product and service revenue were as follows during the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
 
 
  Revenue
  Percentage of Segment Product and Service Revenue
  Revenue
  Percentage of Segment Product and Service Revenue
 
Life Science Systems   $ 129,857   69.1 % $ 120,577   76.1 %
CBRN Detection Systems     30,672   16.3 %   9,426   5.9 %
Bruker Daltonics Aftermarket     27,423   14.6 %   28,556   18.0 %
   
     
     
  Product and Service Revenue     187,952   100.0 %   158,559   100.0 %
Grant Revenue     652         1,185      
   
     
     
  Total Revenue   $ 188,604       $ 159,744      
   
     
     

Bruker Optics

        Bruker Optics' revenue increased by $17.0 million, or 16.1% to $122.5 million for the year ended December 31, 2007, compared to $105.5 million for the comparable period in 2006. Included in this change in revenue is approximately $5.7 million from the impact of foreign exchange. Excluding the effect of foreign exchange, revenue increased 10.7%. The increase in revenue excluding the effect of foreign exchange is attributable to an increase in molecular spectroscopy systems sales year-over-year, partially offset by reduced revenues associated with our order with the Chinese State Food and Drug Administration. For the year ended December 31, 2007, we recognized $7.9 million in revenue from our order with the Chinese State Food and Drug Administration compared with $8.7 million in revenue from this order in the same period in 2006. This order with the Chinese State Food and Drug

50



Administration was completed in 2007 and we do not expect to recognize any molecular spectroscopy systems revenue from this order in 2008. Other systems revenue relates primarily to the distribution of products not manufactured by Bruker Optics. Aftermarket revenues include accessory sales, consumables, training and services. Molecular spectroscopy systems, other systems and aftermarket revenue as a percentage of Bruker Optics' product and service revenue were as follows during the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
 
 
  Revenue
  Percentage of Segment Product and Service Revenue
  Revenue
  Percentage of Segment Product and Service Revenue
 
Molecular Spectroscopy Systems   $ 93,228   76.1 % $ 80,985   76.7 %
Other System Revenue     8,815   7.2 %   7,979   7.6 %
Bruker Optics Aftermarket     20,450   16.7 %   16,566   15.7 %
   
     
     
Total Product and Service Revenue   $ 122,493   100.0 % $ 105,530   100.0 %
   
     
     

Cost of Revenue

        The following table presents cost of product and service revenue and gross profit margins on product and service revenue by reportable segment for the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
 
 
  Cost of Revenue
  Gross Profit Margin
  Cost of Revenue
  Gross Profit Margin
 
Bruker AXS   $ 131,662   46.0 % $ 103,616   42.3 %
Bruker Daltonics     107,524   42.8 %   91,672   42.2 %
Bruker Optics     62,279   49.2 %   50,497   52.1 %
Eliminations (a)     (7,027 )       (9,285 )    
   
     
     
Total Cost of Revenue   $ 294,438   46.2 % $ 236,500   45.6 %
   
     
     

(a)
represents the cost of product and service revenues between reportable segments.

        Bruker AXS' cost of product and service revenue for the year ended December 31, 2007, was $131.7 million, resulting in a gross profit margin of 46.0%, compared to cost of product and service revenue of $103.6 million, or a gross profit margin of 42.3%, for the comparable period in 2006. The increase in gross profit margin is attributable primarily to better capacity utilization as a result of increased revenues year-over-year, the higher margin businesses acquired in the second half of 2006 and the realization of benefits from various ongoing gross profit margin improvement programs, partially offset by lower gross profit margins realized on other system revenues.

        Bruker Daltonics' cost of product and service revenue for the year ended December 31, 2007, was $107.5 million, resulting in a gross profit margin of 42.8%, compared to cost of product and service revenue of $91.7 million, or a gross profit margin of 42.2%, for the comparable period in 2006. The increase in gross profit margin is attributable primarily to increased sales of our CBRN detection systems, and a decrease in OEM life science system sales, which typically have lower margins than direct life science system sales.

        Bruker Optics' cost of product and service revenue for the year ended December 31, 2007, was $62.3 million, resulting in a gross profit margin of 49.2%, compared to cost of product and service revenue of $50.5 million, or a gross profit margin of 52.1%, for the comparable period in 2006. The decrease in gross profit margin is attributable primarily to reduced revenue from our order with the

51



Chinese State Food and Drug Administration and a change in product mix year-over-year within the molecular spectroscopy systems, specifically lower sales of FT-NIR systems.

Sales and Marketing

        The following table presents sales and marketing expense and sales and marketing expense as a percentage of product and service revenue by reportable segment for the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
 
 
  Sales and Marketing
  Percentage of Segment Product and Service Revenue
  Sales and Marketing
  Percentage of Segment Product and Service Revenue
 
Bruker AXS   $ 47,583   19.5 % $ 35,321   19.7 %
Bruker Daltonics     31,157   16.6 %   25,909   16.3 %
Bruker Optics     27,243   22.2 %   22,777   21.6 %
   
     
     
Total Sales and Marketing   $ 105,983   19.4 % $ 84,007   19.3 %
   
     
     

        Bruker AXS' sales and marketing expense for the year ended December 31, 2007, increased to $47.6 million, or 19.5% of product and service revenue, from $35.3 million, or 19.7% of product and service revenue for the comparable period in 2006. The increase in sales and marketing expenses is attributable primarily to increased headcount related to the acquisitions completed in the second half of 2006 and higher commissions on increased revenues and new order bookings.

        Bruker Daltonics' sales and marketing expense for the year ended December 31, 2007, increased to $31.2 million, or 16.6% of product and service revenue, from $25.9 million, or 16.3% of product and service revenue for the comparable period in 2006. The increase in sales and marketing expenses is attributable primarily to incremental investments in various sales and marketing initiatives, related primarily to an increase in product specialists, direct sales, inside sales and applications resources.

        Bruker Optics' sales and marketing expense for the year ended December 31, 2007, increased to $27.2 million, or 22.2% of product and service revenue, from $22.8 million, or 21.6% of product and service revenue for the comparable period in 2006. The increase in sales and marketing expenses is attributable primarily to higher commissions on increased revenues and new order bookings year-over-year, particularly in our Asia-Pacific operations.

General and Administrative

        The following table presents general and administrative expense and general and administrative expense as a percentage of product and service revenue by reportable segment for the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
 
 
  General and Administrative
  Percentage of Segment Product and Service Revenue
  General and Administrative
  Percentage of Segment Product and Service Revenue
 
Bruker AXS   $ 15,950   6.5 % $ 12,856   7.2 %
Bruker Daltonics     8,802   4.7 %   8,047   5.1 %
Bruker Optics     6,085   5.0 %   4,392   4.2 %
Corporate     3,221         3,687      
   
     
     
Total General and Administrative   $ 34,058   6.2 % $ 28,982   6.7 %
   
     
     

52


        Bruker AXS' general and administrative expense for the year ended December 31, 2007, increased to $16.0 million, or 6.5% of product and service revenue, from $12.9 million, or 7.2% of product and service revenue for the comparable period in 2006. The increase in general and administrative expenses is due primarily to increased intangible asset amortization associated with the acquisitions completed during the second half of 2006, increased headcount and tax consulting fees incurred in the second quarter of 2007.

        Bruker Daltonics' general and administrative expense for the year ended December 31, 2007, increased to $8.8 million, or 4.7% of product and service revenue, from $8.0 million, or 5.1% of product and service revenue for the comparable period in 2006. The increase in general and administrative expenses is attributable primarily to tax consulting fees incurred in the second quarter of 2007 and lower general and administrative expenses in 2006 which resulted from the collection of accounts receivable balances which previously had been written-off.

        Bruker Optics' general and administrative expense for the year ended December 31, 2007, increased to $6.1 million, or 5.0% of product and service revenue, from $4.4 million, or 4.2% of product and service revenue for the comparable period in 2006. The increase in general and administrative expenses is attributable primarily to the allocated corporate general and administrative expenses associated with being part of a public company and tax consulting fees incurred in the second quarter of 2007.

        Corporate general and administrative expense for the year ended December 31, 2007, decreased to $3.2 million from $3.7 million for the comparable period in 2006. Corporate general and administrative expenses represent expenses associated with being a public company not allocated to our reportable segments, including legal fees, audit and consulting fees, salaries and filing fees. The decrease in general and administrative expenses is attributable primarily to various salaries and accounting, auditing and consulting fees that were included in corporate expenses during the year ended December 31, 2006, but were allocated to our reportable segments during the year ended December 31, 2007.

Research and Development

        The following table presents research and development expense and research and development expense as a percentage of product and service revenue by reportable segment for the years ended December 31, 2007 and 2006 (dollars in thousands):

 
  2007
  2006
 
 
  Research and Development
  Percentage of Segment Product and Service Revenue
  Research and Development
  Percentage of Segment Product and Service Revenue
 
Bruker AXS   $ 22,777   9.3 % $ 17,687   9.9 %
Bruker Daltonics     27,079   14.4 %   24,681   15.6 %
Bruker Optics     8,610   7.0 %   7,591   7.2 %
   
     
     
Total Research and Development   $ 58,466   10.7 % $ 49,959   11.5 %
   
     
     

        Bruker AXS' research and development expense for the year ended December 31, 2007, increased to $22.8 million, or 9.3% of product and service revenue, from $17.7 million, or 9.9% of product and service revenue for the comparable period in 2006. The increase in research and development expenses is due primarily to an increase in headcount resulting from the acquisitions completed during the second half of 2006, changes in foreign currencies year-over-year, primarily the Euro, as a majority of research and development is performed in Germany and increased material purchases.

        Bruker Daltonics' research and development expense for the year ended December 31, 2007, increased to $27.1 million, or 14.4% of product and service revenue, from $24.7 million, or 15.6% of product and service revenue for the comparable period in 2006. The increase in research and

53



development expenses is attributable primarily to changes in foreign currencies year-over-year, primarily the Euro, as a majority of research and development is performed in Germany and increased material purchases.

        Bruker Optics' general and administrative expense for the year ended December 31, 2007, increased to $8.6 million, or 7.0% of product and service revenue, from $7.6 million, or 7.2% of product and service revenue for the comparable period in 2006. The increase in research and development expenses is attributable primarily to changes in foreign currencies year-over-year, primarily the Euro, as a majority of research and development is performed in Germany.

Acquisition Related Charges

        On December 3, 2007, we announced that we entered into a definitive agreement to acquire all of the stock of the Bruker BioSpin Group. The acquisition of the Bruker BioSpin Group was approved by our shareholders on February 25, 2008, and was subsequently completed on February 26, 2008. The acquisition represented a combination of companies under common control due to a majority of ownership by individuals of both Bruker Corporation and the Bruker BioSpin Group and, as a result, transaction costs are expensed as incurred rather than being included in a purchase price allocation. During the year ended December 31, 2007, we incurred and expensed acquisition related charges totaling $4.7 million, which consisted of legal fees, investment banking, accounting fees, compensation earned by the special committee of the Company's Board of Directors and antitrust regulation filing fees. We expect to incur an additional $3.1 million of acquisition related charges, consisting primarily of investment banking fees, in the first quarter of 2008.

        On April 18, 2006, we announced that we entered into a definitive agreement to acquire all of the stock of Bruker Optics. The acquisition of Bruker Optics was approved by our shareholders on June 29, 2006, and was subsequently completed on July 1, 2006. The acquisition represented a business combination of companies under common control due to a majority of ownership by individuals of both Bruker Corporation and Bruker Optics and, as a result, transaction costs are expensed as incurred rather than being included in a purchase price allocation. During the year ended December 31, 2006, we incurred and expensed acquisition related charges totaling $5.7 million, which consisted of investment banking, legal and accounting fees, compensation earned by the special committee of the Company's Board of Directors and antitrust regulation filing fees.

Interest and Other Income (Expense), Net

        Interest and other income (expense), net during the year ended December 31, 2007, was $(1.4) million, compared to $3.8 million during the comparable period in 2006. During the year ended December 31, 2007, the major components within interest and other income (expense), net, were losses on foreign currency transactions of $2.1 million and net interest expense of $0.5 million offset partially by the appreciation in the fair value of derivative financial instruments of $0.6 million. During the year ended December 31, 2006, the major components within interest and other income (expense), net, were the appreciation in the fair value of derivative financial instruments of $4.7 million and rental income of $0.2 million offset partially by losses on foreign currency transactions of $1.6 million.

Provision for Income Taxes

        The income tax provision for the year ended December 31, 2007, was $16.8 million, or an effective tax rate of 34.5%, compared to an income tax provision of $15.9 million for the year ended December 31, 2006, or an effective tax rate of 46.3%. The lower effective tax rate for the year ended December 31, 2007 compared to the year ended December 31, 2006, was due primarily to new legislation in Germany. We analyzed the impact of these changes on its deferred tax assets and liabilities as of the date of enactment. The temporary differences that will reverse after December 31,

54



2007, have been adjusted to reflect the new tax rate that becomes effective on January 1, 2008. As a result, we recorded a net reduction to income tax expense of $3.7 million in the second half of 2007.

        Our effective tax rate reflects our tax provision for non-U.S. entities only, since no benefit was recognized for losses incurred in the U.S. We will maintain a full valuation allowance for our U.S. net operating losses until evidence exists that it is more likely than not that the loss carryforward amounts will be utilized to offset U.S. taxable income. Our tax rate may change over time as the amount and mix of income and taxes outside the U.S. changes. Our effective tax rate is calculated using our projected annual pre-tax income or loss and is affected by research and development tax credits, the expected level of other tax benefits, and the impact of changes to the valuation allowance, as well as changes in the mix of our pre-tax income and losses among jurisdictions with varying statutory tax rates and credits.

Minority Interest in Consolidated Subsidiaries

        Minority interest in consolidated subsidiaries for the year ended December 31, 2007, was $299,000 compared to $8,000 during the comparable period in 2006. The minority interest in consolidated subsidiaries represents the minority shareholders' proportionate share of net income of those subsidiaries for the years ended December 31, 2007 and 2006. For the years ended December 31, 2007 and 2006, the minority interest relates to our two majority-owned subsidiaries, InCoaTec GmbH and Bruker Baltic Ltd.

Revenue

        The following table presents revenue, changes in revenue and revenue growth by reportable segment for the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
  $ Change
  Percentage Change
 
Bruker AXS   $ 179,502   $ 137,357   $ 42,145   30.7 %
Bruker Daltonics     159,744     161,355     (1,611 ) (1.0 )%
Bruker Optics     105,530     78,701     26,829   34.1 %
Eliminations (a)     (8,942 )   (5,160 )   (3,782 )    
   
 
 
     
Total   $ 435,834   $ 372,253   $ 63,581   17.1 %
   
 
 
     

(a)
represents product and service revenues between reportable segments.

55


Bruker AXS

        Bruker AXS' revenue increased by $42.1 million, or 30.7%, to $179.5 million for the year ended December 31, 2006, compared to $137.4 million for the comparable period in 2005. The impact of foreign exchange was not material. The increase in revenue is attributable to the businesses acquired over the last five quarters and an increase in materials research system sales, other systems and aftermarket revenue. Excluding acquisitions, the revenue growth rate was 20.3%. Other system revenue relates primarily to the distribution of products not manufactured by Bruker AXS. X-ray and OES systems, other systems and aftermarket revenue as a percentage of Bruker AXS' product and service revenue were as follows during the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
 
 
  Revenue
  Percentage of Segment Product and Service Revenue
  Revenue
  Percentage of Segment Product and Service Revenue
 
X-Ray Systems   $ 124,635   69.4 % $ 96,457   70.2 %
Other System Revenue     7,581   4.2 %   6,792   5.0 %
Bruker AXS Aftermarket     47,286   26.4 %   34,108   24.8 %
   
     
     
Total Product and Service Revenue   $ 179,502   100.0 % $ 137,357   100.0 %
   
     
     

Bruker Daltonics

        Bruker Daltonics' revenue decreased by $1.6 million, or 1.0%, to $159.7 million for the year ended December 31, 2006, compared to $161.4 million for the comparable period in 2005. The impact of foreign exchange was not material. The decrease in revenue is a result of higher life science system revenues year-over-year, offset by lower sales of CBRN systems during 2006 compared to 2005, lower grant revenue and lower aftermarket revenues, which includes accessory sales, consumables, training and services. Included in other revenue for 2006 and 2005 are grant revenues from various projects for early-stage research and development projects funded by the German and United States governments. Life science systems, CBRN detection systems and aftermarket revenue as a percentage of Bruker Daltonics' product and service revenue were as follows during the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
 
 
  Revenue
  Percentage of Segment Product and Service Revenue
  Revenue
  Percentage of Segment Product and Service Revenue
 
Life Science Systems   $ 120,577   76.1 % $ 111,323   69.9 %
CBRN Detection Systems     9,426   5.9 %   17,370   10.9 %
Bruker Daltonics Aftermarket     28,556   18.0 %   30,594   19.2 %
   
     
     
  Product and Service Revenue     158,559   100.0 %   159,287   100.0 %
Grant Revenue     1,185         2,068      
   
     
     
  Total Revenue   $ 159,744       $ 161,355      
   
     
     

Bruker Optics

        Bruker Optics' revenue increased by $26.8 million, or 34.1%, to $105.5 million for the year ended December 31, 2006, compared to $78.7 million for the comparable period in 2005. Included in this change in revenue is approximately $1.6 million from the impact of foreign exchange. Excluding the effect of foreign exchange, revenue increased by 32.0%. The increase in revenue excluding the effect of foreign exchange is a result of an increase in molecular spectroscopy system revenues especially in Europe and the Pacific Rim, as well as the recognition of $8.7 million of revenue during 2006 under a

56



new contract with the Chinese State Food and Drug Administration ("SFDA"). Other system revenue relates primarily to the distribution of products not manufactured by Bruker Optics. Molecular spectroscopy systems, other systems and aftermarket revenue as a percentage of Bruker Optics' product and service revenue were as follows during the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
 
 
  Revenue
  Percentage of Segment Product and Service Revenue
  Revenue
  Percentage of Segment Product and Service Revenue
 
Molecular Spectroscopy Systems   $ 80,985   76.7 % $ 57,023   72.4 %
Other System Revenue     7,979   7.6 %   8,560   10.9 %
Bruker Optics Aftermarket     16,566   15.7 %   13,118   16.7 %
   
     
     
Total Product and Service Revenue   $ 105,530   100.0 % $ 78,701   100.0 %
   
     
     

Cost of Revenue

        The following table presents cost of product and service revenue and gross profit margins on product and service revenue by reportable segment for the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
 
 
  Cost of Revenue
  Gross Profit Margin
  Cost of Revenue
  Gross Profit Margin
 
Bruker AXS   $ 103,616   42.3 % $ 83,819   39.0 %
Bruker Daltonics     91,672   42.2 %   88,907   44.2 %
Bruker Optics     50,497   52.1 %   38,278   51.2 %
Eliminations (a)     (9,285 )       (4,730 )    
   
     
     
Total Cost of Revenue   $ 236,500   45.6 % $ 206,274   44.2 %
   
     
     

(a)
represents the cost of product and service revenues between reportable segments.

        Bruker AXS' cost of product and service revenue for the year ended December 31, 2006, was $103.6 million, resulting in a gross profit margin of 42.3%, compared to cost of product and service revenue of $83.8 million, or a gross profit margin of 39.0% for the comparable period in 2005. The increase in gross profit margin is primarily attributable to the higher margin businesses acquired over the last five quarters, better capacity utilization as a result of increased revenue year-over-year and the realization of benefits from various ongoing gross profit margin improvement programs, partially offset by lower gross profit margins realized on other system revenue.

        Bruker Daltonics' cost of product and service revenue for the year ended December 31, 2006, was $91.7 million, resulting in a gross profit margin of 42.2%, compared to cost of product and service revenue of $88.9 million, or a gross profit margin of 44.2% for the comparable period in 2005. The decrease in gross profit margin is primarily attributable to lower CBRN detection system revenues year-over-year.

        Bruker Optics' cost of product and service revenue for the year ended December 31, 2006, was $50.5 million, resulting in a gross profit margin of 52.1%, compared to cost of product and service revenue of $38.3 million, or a gross profit margin of 51.2% for the comparable period in 2005. The increase in gross profit margin is primarily attributable to higher margins realized on the Chinese SFDA systems and better capacity utilization as a result of increased revenues year-over-year.

57


Sales and Marketing

        The following table presents sales and marketing expense and sales and marketing expense as a percentage of product and service revenue by reportable segment for the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
 
 
  Sales and Marketing
  Percentage of Segment Product and Service Revenue
  Sales and Marketing
  Percentage of Segment Product and Service Revenue
 
Bruker AXS   $ 35,321   19.7 % $ 27,589   20.1 %
Bruker Daltonics     25,909   16.3 %   23,849   15.0 %
Bruker Optics     22,777   21.6 %   19,020   24.2 %
   
     
     
Total Sales and Marketing   $ 84,007   19.3 % $ 70,458   19.0 %
   
     
     

        Bruker AXS' sales and marketing expense for the year ended December 31, 2006, increased to $35.3 million, or 19.7% of product and service revenue, from $27.6 million, or 20.1% of product and service revenue for the comparable period in 2005. The increase in sales and marketing expense is primarily attributable to increased headcount related to the acquisitions over the past five quarters and incremental investments in various sales and marketing initiatives.

        Bruker Daltonics' sales and marketing expense for the year ended December 31, 2006, increased to $25.9 million, or 16.3% of product and service revenue, from $23.8 million, or 15.0% of product and service revenue for the comparable period in 2005. The increase in sales and marketing expense is attributable to incremental investments in various sales and marketing initiatives, primarily headcount related.

        Bruker Optics' sales and marketing expense for the year ended December 31, 2006, increased to $22.8 million, or 21.6% of product and service revenue, from $19.0 million, or 24.2% of product and service revenue for the comparable period in 2005. The increase in sales and marketing expense is primarily attributable to increased headcount and higher commissions on increased revenues year-over-year. The decrease in sales and marketing expense as a percentage of product and service revenue is attributable to the leveraging of our sales and marketing infrastructure on higher revenues year-over-year.

General and Administrative

        The following table presents general and administrative expense and general and administrative expense as a percentage of product and service revenue by reportable segment for the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
 
 
  General and Administrative
  Percentage of Segment Product and Service Revenue
  General and Administrative
  Percentage of Segment Product and Service Revenue
 
Bruker AXS   $ 12,856   7.2 % $ 10,797   7.9 %
Bruker Daltonics     8,047   5.1 %   8,906   5.6 %
Bruker Optics     4,392   4.2 %   3,227   4.1 %
Corporate     3,687         2,671      
   
     
     
Total General and Administrative   $ 28,982   6.7 % $ 25,601   6.9 %
   
     
     

        Bruker AXS' general and administrative expenses for the year ended December 31, 2006, increased to $12.9 million, or 7.2% of product and service revenue, from $10.8 million, or 7.9% of product and

58



service revenue for the comparable period in 2005. The increase in general and administrative expenses is primarily due to increased headcount and intangible asset amortization related to the acquisitions completed over the past five quarters.

        Bruker Daltonics' general and administrative expense for the year ended December 31, 2006, decreased to $8.0 million, or 5.1% of product and service revenue, from $8.9 million, or 5.6% of product and service revenue for the comparable period of 2005. The decrease in general and administrative expenses is primarily attributable to lower bad debt expenses year-over-year and benefits from ongoing cost reduction initiatives.

        Bruker Optics' general and administrative expenses for the year ended December 31, 2006, increased to $4.4 million, or 4.2% of product and service revenue, from $3.2 million, or 4.1% of product and service revenue for the comparable period in 2005. The increase in general and administrative expenses is primarily due to the expansion of the business and to allocated corporate general and administrative expenses associated with being a public company.

        Corporate general and administrative expense for the year ended December 31, 2006, increased to $3.7 million from $2.7 million for the comparable period in 2005. Corporate general and administrative expenses represent expenses associated with being a public company not allocated to our reportable segments, including legal fees, audit and consulting fees, salaries and filing fees. The increase in expenses is primarily attributable to stock-based compensation charges in 2006 not required to be recorded in 2005 and increased headcount year-over-year, partially offset by ongoing cost reduction initiatives.

Research and Development

        The following table presents research and development expense and research and development expense as a percentage of product and service revenue by reportable segment for the years ended December 31, 2006 and 2005 (dollars in thousands):

 
  2006
  2005
 
 
  Research and Development
  Percentage of Segment Product and Service Revenue
  Research and Development
  Percentage of Segment Product and Service Revenue
 
Bruker AXS   $ 17,687   9.9 % $ 14,093   10.3 %
Bruker Daltonics     24,681   15.6 %   27,264   17.1 %
Bruker Optics     7,591   7.2 %   6,141   7.8 %
   
     
     
Total Research and Development   $ 49,959   11.5 % $ 47,498   12.8 %
   
     
     

        Bruker AXS' research and development expense for the year ended December 31, 2006, increased to $17.7 million, or 9.9% of product and service revenue, from $14.1 million, or 10.3% of product and service revenue for the comparable period in 2005. The increase in research and development expense is primarily attributable to an increase in headcount resulting from the acquisitions completed over the past five quarters, and increased material purchases during 2006 compared to 2005.

        Bruker Daltonics' research and development expense for the year ended December 31, 2006, decreased to $24.7 million, or 15.6% of product and service revenue, from $27.3 million, or 17.1% of product and service revenue for the comparable period in 2005. The decrease in research and development expense is primarily attributable to a decrease in material purchases during the year ended December 31, 2006 compared to the comparable period in 2005 and to a reduction in headcount year-over-year.

        Bruker Optics' research and development expense for the year ended December 31, 2006, increased to $7.6 million, or 7.2% of product and service revenue, from $6.1 million, or 7.8% of

59



product and service revenue for the comparable period in 2005. The increase in research and development expense is primarily attributable to development activities associated with our Dispersive Raman product line, enhanced product development activities and an increase in material purchases and headcount during 2006 compared to 2005.

Acquisition Related Charges

        On April 18, 2006, we announced that we entered into a definitive agreement to acquire all of the stock of Bruker Optics. The acquisition of Bruker Optics was approved by our shareholders on June 29, 2006, and was subsequently completed on July 1, 2006. The acquisition represented a business combination of companies under common control due to a majority of ownership by individuals of both Bruker Corporation and Bruker Optics and, as a result, transaction costs are expensed as incurred rather than being included in a purchase price allocation. During the year ended December 31, 2006, we incurred and expensed acquisition related charges totaling $5.7 million, which consisted of investment banking, legal and accounting fees, compensation earned by the special committee of the Company's Board of Directors and antitrust regulation filing fees.

Interest and Other Income (Expense), Net

        Interest and other income (expense), net, during the year ended December 31, 2006, was $3.8 million, compared to $(0.8) million during the comparable period in 2005. During the year ended December 31, 2006, the major components within interest and other income (expense), net, were the appreciation of the fair value of derivative financial instruments of $4.7 million, rental income of $0.2 million and losses on foreign currency transactions of $(1.6) million. During the year ended December 31, 2005, the major components within interest and other income (expense), net, were the depreciation of the fair value of derivative financial instruments of $(2.7) million, net interest income of $0.5 million and gains on foreign currency transactions of $1.3 million.

Provision for Income Taxes

        The income tax provision for the year ended December 31, 2006, was $15.9 million, or an effective tax rate of 46.3%, compared to an income tax provision of $11.9 million for the year ended December 31, 2005, or an effective tax rate of 54.8%. Our effective tax rate reflects our tax provision for non-U.S. entities only, since no benefit was recognized for losses incurred in the U.S. We will maintain a full valuation allowance for our U.S. net operating losses until evidence exists that it is more likely than not that the loss carryforward amounts will be utilized to offset U.S. taxable income. Our tax rate may change over time as the amount or mix of income and taxes outside the U.S. changes. Our effective tax rate is calculated using our projected annual pre-tax income or loss and is affected by research and development tax credits, the expected level of other tax benefits, and the impact of changes to the valuation allowance, as well as changes in the mix of our pre-tax income and losses among jurisdictions with varying statutory tax rates and credits.

Minority Interest in Consolidated Subsidiaries

        Minority interest in consolidated subsidiaries for the year ended December 31, 2006, was $8,000 compared to $40,000 in 2005. The minority interest in subsidiaries represents the minority shareholders' proportionate share of net income of those subsidiaries for the years ended December 31, 2006 and 2005. For the years ended December 31, 2006 and 2005, the minority interest relates to our two majority-owned subsidiaries, InCoaTec GmbH and Bruker Baltic Ltd. (formerly, Baltic Scientific Instruments Ltd.).

60


LIQUIDITY AND CAPITAL RESOURCES

        We currently anticipate that our existing cash will be sufficient to support our operating and investing needs for at least the next twelve months, however this depends on our profitability and our ability to manage working capital requirements. Our future cash requirements will also be affected by potential acquisitions. Historically, we financed our growth through a combination of cash generated from operations, debt financings and issuances of common stock. In the future, there can be no assurances that additional financing alternatives will be available to us if required, or if available, will be obtained with favorable terms.

        On February 26, 2008, we completed our acquisition of the Bruker BioSpin Group for $914.0 million. The acquisition of the Bruker BioSpin Group was financed with 57,844,872 shares of unregistered common stock valued at $526.0 million based on the trailing 10 day trading average closing price of $9.14 per share as of two days prior to the signing of the transaction agreements, $351.0 million of cash obtained under a new five year credit facility and the balance with cash on hand. The Credit Agreement is with a syndication of lenders and provides for a revolving credit line with a maximum commitment of $230.0 million and a term facility of $150.0 million. The outstanding principal under the term loan is payable in quarterly installments through December 2012. Borrowings under the Credit Agreement bear interest, at the Company's option, at either (i) the higher of the prime rate or the federal funds rate plus 0.50%, or (ii) adjusted LIBOR, plus margins ranging from 0.40% to 1.25% and a facility fee ranging from 0.10% to 0.20%. As of February 26, 2008, the weighted-average interest rate of borrowings under the Credit Agreement was approximately 4.1%.

        Borrowings under the Credit Agreement are secured by the pledge to the banks of 100% of the capital stock of each of the Company's wholly-owned domestic subsidiaries and 65% of the capital stock of certain of the Company's wholly-owned direct or indirect foreign subsidiaries. The Credit Agreement also requires that we maintain certain financial ratios related to maximum leverage and minimum interest coverage, as defined in the Credit Agreement. In addition to the financial ratios, the Credit Agreement restricts, among other things, our ability to do the following: make certain payments; incur additional debt; incur certain liens; make certain investments, including derivative agreements; merge, consolidate, sell or transfer all or substantially all of the Company's assets; and enter into certain transactions with affiliates.

        During the year ended December 31, 2007, net cash provided by operating activities was $28.2 million compared to net cash provided by operating activities of $37.7 million during the year ended December 31, 2006. The change in cash from operating activities was attributable primarily to changes in working capital, specifically increases in accounts receivable and inventory offset partially by increases in accounts payable and income taxes payable.

        During the year ended December 31, 2007, net cash used by investing activities was $20.5 million compared to net cash provided by investing activities of $12.2 million during the year ended December 31, 2006. Cash used by investing activities during the year ended December 31, 2007, was attributable primarily to $16.1 million in capital expenditures and $4.2 million used for acquisitions, net of cash acquired. Cash provided by investing activities during the year ended December 31, 2006, was attributable primarily to $46.5 million from the sales of short-term investments offset by approximately $26.4 million used for acquisitions, net of cash acquired and $7.6 million in capital expenditures.

        During the year ended December 31, 2007, net cash provided by financing activities was $9.1 million compared to net cash used by financing activities of $64.4 million during the year ended December 31, 2006. Cash provided by financing activities during the year ended December 31, 2007, was attributable to $19.6 million in net proceeds from a public offering of common stock along with subsequent stock option exercises, partially offset by $8.0 million in net repayments of short-term borrowing and $2.4 million in repayments of long-term borrowing. The net cash used by financing activities during the year ended December 31, 2006, consisted of $74.0 million paid to certain

61



shareholders in connection with the acquisition of Bruker Optics offset by $12.2 million in increased proceeds from short-term borrowings. Although the $74.0 million was part of the Bruker Optics purchase price, the purchase accounting treatment for companies under common control resulted in these payments being recorded within financing activities as a deemed dividend.

        At December 31, 2007, we had outstanding debt totaling $38.1 million consisting of $25.1 million outstanding under long-term debt arrangements and $13.0 million outstanding under revolving lines of credit. At December 31, 2006, we had outstanding debt totaling $44.7 million consisting of $25.3 million outstanding under long-term debt arrangements and $19.4 million outstanding under revolving lines of credit.

        Amounts outstanding under long-term debt arrangements include both collateralized and uncollateralized arrangements with various financial institutions in Germany, Japan and the United States and a government agency in the United States. Our long-term debt arrangements also consist of fixed and variable interest rates ranging from 1.80% to 8.01% at December 31, 2007. Certain of these arrangements expose us to adverse movements in interest rates, primarily from floating rate debt instruments that are indexed to short-term market rates. We entered into interest rate swaps and cross currency rate swaps in order to minimize the volatility that changes in interest rates might have on earnings and cash flows.

        Our revolving lines of credit are with various financial institutions in the United States, Germany, Japan and France and have aggregate maximum borrowing amounts of $121.0 million and $75.3 million at December 31, 2007 and 2006, respectively. With consideration to outstanding letters of credit, we had availability of approximately $94.7 million and $46.8 million at December 31, 2007 and 2006, respectively. Effective February 26, 2008, we terminated our line of credit in the United States and replaced it with the revolving credit available under the Credit Agreement entered into in connection with the acquisition of the Bruker BioSpin Group.

        Our $75.0 million revolving line of credit in the United States was secured by a pledge of 100% of the capital stock of each of our wholly-owned domestic subsidiaries, each of which also pledged a portion of the stock of certain of their foreign subsidiaries. The maximum commitment under this line of credit was increased to $75.0 million from $40.0 million in September 2007. Borrowings under this revolving line of credit bore interest at the bank's prime rate, LIBOR plus 1%, or a LIBOR advantage rate plus 1% at the request of the Company. There were no amounts outstanding under this line of credit at December 31, 2007, and there was $11.0 million outstanding at December 31, 2006.

        Our revolving lines of credit in Germany, Japan and France provide for a maximum commitment of $46.0 million and are uncollateralized. Borrowings under the revolving lines of credit in Germany, Japan and France bear interest at variable rates and ranged from 1.50% to 9.75% on amounts outstanding at December 31, 2007.

        The following table summarizes maturities for our significant financial obligations as of December 31, 2007 (in thousands):

Contractual Obligations

  Total
  Less than 1 Year
  1-3 Years
  4-5 Years
  More than 5 years
Short-term borrowings   $ 13,058   $ 13,058   $   $   $
Operating lease obligations     21,366     4,902     8,274     6,906     1,284
Long-term debt, including current portion     25,052     18,658     3,923     2,133     338
Pensions     12,933     155     703     1,304     10,771
Uncertain tax contingencies     7,260         7,260        
   
 
 
 
 
Total contractual obligations   $ 79,669   $ 36,773   $ 20,160   $ 10,343   $ 12,393
   
 
 
 
 

62


        Uncertain tax contingencies are positions taken or expected to be taken on an income tax return that may result in additional payments to tax authorities. The amount in the preceding table includes interest and penalties accrued related to such positions as of December 31, 2007. The total amount of uncertain tax contingencies is included in the "1-3 Years" column because we are not able to reasonably estimate the timing of potential future payments. If a tax authority agrees with the tax position taken or expected to be taken or the applicable statute of limitations expires, then additional payments will not be necessary.

        As of December 31, 2007, we had $18.9 million of net operating loss carryforwards available to reduce future U.S. taxable income. These losses have various expiration dates through 2027. We also had foreign tax credits of $8.0 million that expire in 2017 and research and development tax credits of $3.1 million available to offset future U.S. tax liabilities that expire at various dates through 2025.

TRANSACTIONS WITH RELATED PARTIES

        Prior to the acquisition of the Bruker BioSpin Group on February 26, 2008, we were affiliated, through common shareholders, with several other entities which use the Bruker name. A sharing agreement with certain of these affiliates provides for the sharing of specified intellectual property rights, services, facilities and other related items.

        As of December 31, 2007 and 2006, we had payables to related parties of $8.3 million and $5.9 million, respectively. As of December 31, 2007 and 2006, we had receivables from related parties of $7.2 million and $9.0 million, respectively. Payment terms on balances with related parties are similar as those with third party customers.

        Sales to related parties which are not subsidiaries of ours are included as revenues in the consolidated financial statements. These related parties maintain sales offices in countries in which we do not have our own distribution network. As such, these sales were primarily for resale of our products only. These sales amounted to $14.5 million, $11.3 million and $13.0 million for the years ended December 31, 2007, 2006 and 2005, respectively. In addition, we purchased products and services which amounted to $24.0 million, $21.1 million and $17.0 million from affiliated entities in the years ended December 31, 2007, 2006 and 2005, respectively.

        We share various general and administrative expenses for items including umbrella insurance policies, accounting services and leases with various related parties. These general and administrative expenses amounted to $5.1 million, $3.7 million and $2.8 million for the years ended December 31, 2007, 2006 and 2005, respectively.

        During the years ended December 31, 2007, 2006 and 2005, we paid $1.3 million, $1.3 million and $0.5 million, respectively, to a law firm in which one of our directors is a partner.

        During the years ended December 31, 2007, 2006 and 2005, we paid $0.1 million in each period to a financial services firm in which one of our directors is a partner.

        Bruker Optics rents various office space from a principal stockholder under lease agreements. During each of the years ended December 31, 2007, 2006 and 2005, this stockholder was paid approximately $0.4 million, $0.3 million and $0.3 million, respectively, which was estimated to be equal to the fair market value less the cost of capital improvements provided by Bruker Optics in 2004. Bruker Optics subleased a portion of this office space to an affiliate during 2007, 2006 and 2005, and received rental income, which includes charges for utilities and other occupancy costs, of $31,500 for each period. This rental income is recorded as a reduction of rent, utilities and building maintenance expenses.

63


NEW ACCOUNTING PRONOUNCEMENTS

        In December 2007, the FASB issued SFAS No. 141(R), Business Combinations ("SFAS No. 141(R)"). This statement will significantly change the accounting for business combinations. Under SFAS No. 141(R), an acquiring entity will be required to recognize all of the assets acquired and liabilities assumed in a transaction at the acquisition date fair value with certain limited exceptions. In addition, SFAS No. 141(R) will change the accounting treatment for acquisition costs, in-process research and development, restructuring costs associated with business combinations and changes in deferred tax asset valuation allowances and income tax uncertainties after the acquisition date. SFAS No. 141(R) also includes a significant number of new disclosure requirements. Early adoption of SFAS No. 141(R) is prohibited and we will be required to apply SFAS No. 141(R) to acquisitions that occur on or after January 1, 2009.

        In December 2007, the FASB issued SFAS No. 160, Noncontrolling Interests in Consolidated Financial Statements—An Amendment of ARB No. 51 ("SFAS No. 160"). This statement establishes new accounting and reporting standards for the minority interest in a subsidiary and the deconsolidation of a subsidiary. SFAS No. 160 is effective as of the beginning of fiscal 2009 and early adoption is prohibited. We have not yet assessed the effect, if any, that adoption of SFAS No. 160 will have on its results of operations and financial position.

        In February 2007, the FASB issued SFAS No. 159, The Fair Value Option for Financial Assets and Liabilities, Including an amendment of FASB Statement No. 115 ("SFAS No. 159"). This Statement permits entities to choose to measure many financial instruments and certain other items at fair value that are not currently required to be measured at fair value. SFAS No. 159 is effective as of the beginning of fiscal 2008. We do not expect that adoption of SFAS No. 159 will have a material impact on our results of operations or financial position.

        In September 2006, the FASB issued Statement of Financial Accounting Standards No. 157, Fair Value Measurements ("SFAS No. 157"). This Statement is effective for financial statements issued for fiscal years beginning after November 15, 2007. In February 2008, the FASB issued FASB Staff Position (FSP) 157-1, Application of FASB Statement No. 157 to FASB Statement No. 13 and Other Accounting Pronouncements that Address Fair Value Measurements for Purposes of Lease Classification or Measurement under Statement 13 ("FSP 157-1") and FSP 157-2, Effective Date of FASB Statement No. 157 ("FSP 157-2"). FSP 157-2 defers the effective date in SFAS No. 157 until fiscal years beginning after November 15, 2008, for certain nonfinancial assets and liabilities. SFAS No. 157 provides a common fair value hierarchy for companies to follow in determining fair value measurements in the preparation of financial statements and expands disclosure requirements relating to how such fair value measurements were developed. SFAS No. 157 clarifies the principle that fair value should be based on the assumptions that the marketplace would use when pricing an asset or liability, rather than company specific data. We are currently assessing the impact that SFAS No. 157 will have on its results of operations and financial position.

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

        We are potentially exposed to market risks associated with changes in foreign exchange rates and interest rates. We selectively use financial instruments to reduce these risks. All transactions related to risk management techniques are authorized and executed pursuant to our policies and procedures. Analytical techniques used to manage and monitor foreign exchange and interest rate risk include market valuations and sensitivity analysis.

Impact of Foreign Currencies

        We generate a substantial portion of its revenues in international markets, principally Europe and Japan, which subjects its operations to the exposure of exchange rate fluctuations. The impact of

64



currency exchange rate movement can be positive or negative in any period. Our costs related to sales in foreign currencies are largely denominated in the same respective currencies, limiting our transaction risk exposure. However, for sales not denominated in U.S. dollars, if there is an increase in the rate at which a foreign currency is exchanged for U.S. dollars, it will require more of the foreign currency to equal a specified amount of U.S. dollars than before the rate increase. In such cases, if we price our products in the foreign currency, we will receive less in U.S. dollars than we did before the rate increase went into effect. If we price our products in U.S. dollars and competitors price their products in local currency, an increase in the relative strength of the U.S. dollar could result in our prices not being competitive in a market where business is transacted in the local currency.

        Our realized foreign exchange gains (losses), net were $(2.1) million and $(1.6) million for the years ended December 31, 2007 and 2006, respectively. As we continue to expand internationally we will continue to evaluate our currency risks and may utilize foreign exchange rate contracts more frequently in order to mitigate our foreign currency exposure.

        From time to time, we enter into foreign exchange rate contracts in order to minimize the volatility that fluctuations in currency exchange rates have our cash flows related to purchases and sales denominated in foreign currencies. At December 31, 2007, we had outstanding forward currency exchange contracts with notional amounts aggregating $15.0 million. The contracts involved the purchase of EURO currency at fixed U.S. dollar amounts on specified dates and had maturities of less than twelve months. The notional amounts of the contracts are intended to hedge receivables in U.S. dollars. However, these transactions do not qualify for hedge accounting under SFAS No. 133, Accounting for Derivative Instruments and Hedging Activities. Accordingly, the instruments are marked-to-market with the corresponding gains and losses recorded in other income (expense) in the consolidated statements of operations. As of December 31, 2007, the currency exchange contracts had fair values of less than $0.1 million.

Impact of Interest Rates

        We regularly invest excess cash in overnight repurchase agreements and interest-bearing investment-grade securities that we hold for the duration of the term of the respective instrument and are subject to changes in short-term interest rates. We believe that the market risk arising from holding these financial instruments is minimal.

        Our exposure related to adverse movements in interest rates is derived primarily from outstanding floating rate debt instruments that are indexed to short-term market rates. Our objective in managing our exposure to interest rates is to decrease the volatility that changes in interest rates might have on our earnings and cash flows. To achieve this objective we entered into interest rate swaps and cross currency rate swaps in order to minimize the volatility that changes in interest rates might have on earnings and cash flows. We have determined that its interest rate swaps are not effective in offsetting the change in interest cash flows being hedged as defined by SFAS No. 133 and, accordingly, the changes in the swap's fair value are recorded in current earnings in interest and other income (expense) in the consolidated statements of operations.

        In 1999, we entered into an interest rate swap arrangement to pay a 4.60% fixed rate of interest and receive a variable rate of interest based on the Securities Industry and Financial Markets Municipal Swap Index through December 2013. The notional amount of the interest rate swap was $1.7 million at December 31, 2007, and had a fair value of $(0.1) million.

        In 2002, we entered into a cross currency interest rate swap arrangement under which we receive semiannual interest payments in EUROs based on a variable interest rate equal to the six-month EURIBOR rate in exchange for semiannual payments in Swiss francs at a fixed rate of 4.97% through December 2011. The notional amount of the swap was €5.0 million and had a fair value of $0.6 million.

65


        A 10% increase or decrease in the average cost of our variable rate debt would not result in a material change in pre-tax interest expense.

Inflation

        We do not believe inflation had a material impact on our business or operating results during any of the periods presented.

66


ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 
  Page

Report of Ernst & Young LLP, Independent Registered Public Accounting Firm

 

68

Consolidated Balance Sheets as of December 31, 2007 and 2006

 

69

Consolidated Statements of Operations for the years ended December 31, 2007, 2006 and 2005

 

70

Consolidated Statements of Shareholders' Equity and Comprehensive Income (Loss) for the years ended December 31, 2007, 2006 and 2005

 

71

Consolidated Statements of Cash Flows for the years ended December 31, 2007, 2006 and 2005

 

72

Notes to Consolidated Financial Statements

 

73

67



REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Shareholders
Bruker Corporation

        We have audited the accompanying consolidated balance sheets of Bruker Corporation as of December 31, 2007 and 2006, and the related consolidated statements of operations, shareholders' equity and comprehensive income (loss), and cash flows for each of the three years in the period ended December 31, 2007. Our audits also included the financial statement schedule listed in the Index at Item 15(a). These financial statements and schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

        We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

        In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Bruker Corporation at December 31, 2007 and 2006, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2007, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

        As discussed in Note 2 to the consolidated financial statements, effective January 1, 2006, Bruker Corporation adopted Statement of Financial Accounting Standards No. 123(R), Share-Based Payment, and effective January 1, 2007, adopted Financial Accounting Standards Board Interpretation 48, Accounting for Uncertainty in Income Taxes.

        We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Bruker Corporation's internal control over financial reporting as of December 31, 2007, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 14, 2008 expressed an unqualified opinion thereon.

    /s/ ERNST & YOUNG LLP
Boston, Massachusetts
March 14, 2008
   

68



BRUKER CORPORATION

CONSOLIDATED BALANCE SHEETS

(in thousands, except share data)

 
  December 31,
 
  2007
  2006
ASSETS            
Current assets:            
  Cash and cash equivalents   $ 72,876   $ 52,147
  Accounts receivable, net     114,938     79,604
  Due from affiliated companies     7,203     9,028
  Inventories     171,332     134,504
  Other current assets     29,281     19,461
   
 
    Total current assets     395,630     294,744
 
Property, plant and equipment

 

 

103,100

 

 

90,349
  Restricted cash     1,683     1,107
  Goodwill     40,780     39,777
  Intangible assets     4,128     5,579
  Other assets     7,892     1,631
   
 
    Total assets   $ 553,213   $ 433,187
   
 

LIABILITIES AND SHAREHOLDERS' EQUITY

 

 

 

 

 

 
Current liabilities:            
  Short-term borrowings   $ 13,058   $ 19,396
  Current portion of long-term debt     18,658     2,461
  Accounts payable     32,584     23,102
  Due to affiliated companies     8,326     5,901
  Customer advances     55,855     49,461
  Other current liabilities     124,472     94,807
   
 
    Total current liabilities     252,953     195,128
 
Long-term debt

 

 

6,394

 

 

22,863
  Other long-term liabilities     21,736     12,375
  Accrued pension     12,933     11,116
  Minority interest in consolidated subsidiaries     538     239
  Commitments and contingencies (Note 14)            

Shareholders' equity:

 

 

 

 

 

 
  Preferred stock, $0.01 par value, 5,000,000 shares authorized, none issued or outstanding at December 31, 2007 and 2006        
  Common stock, $0.01 par value, 200,000,000 shares authorized, 105,717,320 and 102,561,129 shares issued and outstanding at December 31, 2007 and 2006, respectively     1,050     1,020
  Additional paid-in capital     171,508     149,460
  Retained earnings     48,245     17,467
  Accumulated other comprehensive income     37,856     23,519
   
 
    Total shareholders' equity     258,659     191,466
   
 
    Total liabilities and shareholders' equity   $ 553,213   $ 433,187
   
 

The accompanying notes are an integral part of these financial statements.

69



BRUKER CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)

 
  Year Ended December 31,
 
 
  2007
  2006
  2005
 
Product revenue   $ 482,153   $ 384,548   $ 329,452  
Service revenue     64,553     49,930     40,471  
Other revenue     870     1,356     2,330  
   
 
 
 
  Total revenue     547,576     435,834     372,253  

Cost of product revenue

 

 

252,130

 

 

206,628

 

 

178,831

 
Cost of service revenue     42,308     29,872     27,443  
   
 
 
 
  Total cost of revenue     294,438     236,500     206,274  
   
 
 
 
  Gross profit     253,138     199,334     165,979  

Operating expenses:

 

 

 

 

 

 

 

 

 

 
Sales and marketing     105,983     84,007     70,458  
General and administrative     34,058     28,982     25,601  
Research and development     58,466     49,959     47,498  
Acquisition related charges     4,664     5,724      
   
 
 
 
  Total operating expenses     203,171     168,672     143,557  
   
 
 
 
    Operating income     49,967     30,662     22,422  

Interest and other income (expense), net

 

 

(1,355

)

 

3,758

 

 

(780

)
   
 
 
 
Income before provision for income taxes and minority interest in consolidated subsidiaries     48,612     34,420     21,642  
Provision for income taxes     16,784     15,931     11,855  
   
 
 
 
Income before minority interest in consolidated subsidiaries     31,828     18,489     9,787  
Minority interest in consolidated subsidiaries     299     8     40  
   
 
 
 
Net income   $ 31,529   $ 18,481   $ 9,747  
   
 
 
 

Net income per share—basic and diluted:

 

$

0.30

 

$

0.18

 

$

0.10

 
Weighted average common shares outstanding:                    
  Basic     103,702     101,512     100,823  
  Diluted     106,769     102,561     101,130  

The accompanying notes are an integral part of these financial statements.

70



BRUKER CORPORATION

CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY AND COMPREHENSIVE INCOME (LOSS)

(in thousands, except share data)

 
  Shares
  Amount
  Additional Paid-in Capital
  Retained Earnings (Accumulated Deficit)
  Treasury Stock
  Accumulated Other Comprehensive Income
  Total Shareholders' Equity
 
Balance at December 31, 2004   100,772,313   $ 1,008   $ 216,420   $ (10,761 ) $   $ 28,873   $ 235,540  
Shares issued in connection with acquisition   209,271     2     892                 894  
Stock options exercised   124,121     1     376                 377  
Stock compensation related to stock options issued to non-employees           28                 28  
Comprehensive loss:                                          
  Net income               9,747             9,747  
  Unrealized gain on investments                       12     12  
  Foreign currency translation adjustments                       (17,191 )   (17,191 )
                                     
 
Net comprehensive loss                                       (7,432 )
   
 
 
 
 
 
 
 
Balance at December 31, 2005   101,105,705   $ 1,011   $ 217,716   $ (1,014 ) $   $ 11,694   $ 229,407  
Shares issued in connection with the purchase of minority interest   73,475     1     360                 361  
Deemed dividend in connection with the Bruker Optics acquisition           (74,021 )               (74,021 )
Shares issued in connection with acquisitions   469,525     5     2,605                 2,610  
Stock options exercised   290,224     3     1,326                 1,329  
Stock based compensation           1,474                 1,474  
Issuance of restricted shares   622,200                          
Comprehensive income:                                          
  Net income               18,481             18,481  
  Foreign currency translation adjustments                       11,825     11,825  
                                     
 
Net comprehensive income                                       30,306  
   
 
 
 
 
 
 
 
Balance at December 31, 2006   102,561,129   $ 1,020   $ 149,460   $ 17,467   $   $ 23,519   $ 191,466  
Issuance of common stock, net of issuance costs   2,530,000     25     16,906                 16,931  
Shares issued in connection with acquisitions   38,493         345                 345  
Stock options exercised   500,366     5     2,545                 2,550  
Stock based compensation           2,161                 2,161  
Issuance of restricted shares   87,332                          
Treasury stock acquired           84         (92 )       (8 )
Treasury stock reissued           7         92         99  
Reduction in retained earnings related to the adoption of FIN No. 48               (751 )           (751 )
Comprehensive income:                                        
  Net income               31,529             31,529  
  Foreign currency translation adjustments                       14,337     14,337  
                                     
 
Net comprehensive income                                       45,866  
   
 
 
 
 
 
 
 
Balance at December 31, 2007   105,717,320   $ 1,050   $ 171,508   $ 48,245   $   $ 37,856   $ 258,659  
   
 
 
 
 
 
 
 

The accompanying notes are an integral part of these financial statements.

71



BRUKER CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

 
  Year Ended December 31,
 
 
  2007
  2006
  2005
 
Cash flows from operating activities:                    
Net income (loss)   $ 31,529   $ 18,481   $ 9,747  
Adjustments to reconcile net income (loss) to cash flows from operating activities:                    
  Depreciation and amortization     12,628     13,289     10,506  
  Deferred income taxes     (2,029 )   1,412     (1,315 )
  Provision for doubtful accounts     299     (368 )   155  
  Stock compensation     2,161     1,474     28  
  Minority interest in consolidated subsidiary     299     8     40  
  Loss (gain) on disposal of assets     493     (464 )   (513 )
  (Gain) loss on fair market value of derivative instruments     621     (4,714 )   2,783  
Changes in operating assets and liabilities:                    
  Accounts receivable     (28,082 )   (5,779 )   (2,253 )
  Inventories     (26,217 )   (11,675 )   (835 )
  Other assets and prepaid expenses     (6,557 )   (10,349 )   (3,728 )
  Accounts payable     10,929     11,172     573  
  Income taxes payable     4,897     (7,031 )   9,982  
  Accrued pension     634     1,520     1,020  
  Other liabilities     26,604     30,717     23,532  
   
 
 
 
Net cash provided by operating activities     28,209     37,693     49,722  
   
 
 
 
Cash flows from investing activities:                    
  Purchases of property, plant and equipment     (16,079 )   (7,623 )   (4,791 )
  Purchase of short-term investments             (1,276 )
  Redemption of short-term investments         46,460      
  Acquisitions, net of cash acquired     (4,152 )   (26,449 )   (5,605 )
  Restricted cash     (304 )   (89 )   (357 )
   
 
 
 
Net cash (used in) provided by investing activities     (20,535 )   12,299     (12,029 )
   
 
 
 
Cash flows from financing activities:                    
  Proceeds from (repayment of) short-term borrowings, net     (8,034 )   12,179     (5,366 )
  Repayment of long-term debt     (2,436 )   (6,709 )   (6,299 )
  Proceeds from long-term debt         2,583     313  
  Proceeds from issuance of common stock, net of issuance costs     19,572     1,583     377  
  Cash payments to shareholders         (74,021 )    
   
 
 
 
Net cash provided by (used in) financing activities     9,102     (64,385 )   (10,975 )
  Effect of exchange rate changes on cash     3,953     3,908     (5,506 )
   
 
 
 
Net change in cash and cash equivalents     20,729     (10,485 )   21,212  
Cash and cash equivalents at beginning of year     52,147     62,632     41,420  
   
 
 
 
Cash and cash equivalents at end of year   $ 72,876   $ 52,147   $ 62,632  
   
 
 
 
Supplemental disclosure of cash flow information:                    
  Cash paid for interest   $ 1,967   $ 2,101   $ 1,637  
  Cash paid for taxes     16,917     21,658     2,858  
Noncash investing and financing activities:                    
  Issuance of common stock for Bruker Optics acquisition         55,853      
  Issuance of common stock for other acquisitions     345     2,610     894  

The accompanying notes are an integral part of these statements.

72



Bruker Corporation

Notes to Consolidated Financial Statements

Note 1—Description of Business

        Bruker Corporation and its wholly-owned subsidiaries (the "Company") design, manufacture, service and market proprietary life science and materials research systems based on mass spectrometry core technology platforms, X-ray technologies, optical emission spectroscopy (OES), and infrared and Raman molecular spectroscopy technology. The Company also sells a broad range of field analytical systems for chemical, biological, radiological and nuclear (CBRN) detection. The Company maintains major technical and manufacturing centers in Europe, North America and Japan and sales offices throughout the world. The Company's diverse customer base includes pharmaceutical, biotechnology and proteomics companies, academic institutions, advanced materials and semiconductor industries and government agencies.

        On July 1, 2006, the Company completed its acquisition of Bruker Optics Inc. ("Bruker Optics"). Both the Company and Bruker Optics were majority owned by five affiliated stockholders prior to the acquisition. As a result, the acquisition of Bruker Optics by the Company is considered a business combination of companies under common control. Accordingly, the acquisition of Bruker Optics, as it relates to the portion under common ownership (approximately 96%), was accounted for at historical carrying values at the date of the acquisition. The portion not under the common ownership of the five affiliated stockholders (approximately 4%) has been accounted for as a minority interest. The portion not under common control primarily represented stock options to purchase shares of common stock outstanding at the date of the acquisition. The excess purchase price of the interest not under common control over the fair value of the related net assets acquired was accounted for as goodwill and intangible assets. The consolidated balance sheets, statements of operations, statements of cash flows and notes to the consolidated financial statements for all periods presented herein have been restated by combining the historical consolidated financial statements of the Company with those of Bruker Optics.

        Since the integration of the Bruker Optics acquisition began, management of the Company has been changing the way the business is managed and considers the Company to be a provider of instrumentation and solutions to life sciences and industrial businesses throughout the world. Management will continue to focus on addressing the markets we serve and the needs of our various customers, including pharmaceutical, biotechnology, advanced and raw materials companies, and academic and governmental institutions, and less on selling individual products and technologies. As a result of changes in the Company's business, the Company may change its segment reporting in the future. The Company currently reports financial results on the basis of the following three business segments:

73


Note 2—Summary of Significant Accounting Policies

Principles of Consolidation

        The financial statements include the accounts of the Company and all majority and wholly-owned subsidiaries. All intercompany accounts and transactions have been eliminated.

Cash and Cash Equivalents

        Cash and cash equivalents consist primarily of highly liquid investments with original maturities of three months or less at the date of acquisition. Cash and cash equivalents primarily include cash on hand, money market funds and time deposits. Time deposits represent amounts on deposit in banks and temporarily invested in instruments with maturities of three months or less at the time of purchase. Certain of these investments represent deposits which are not insured by the FDIC or any other United States government agency. Cash and cash equivalents are carried at cost, which approximates market value.

Restricted Cash

        Certain customers require the Company to provide bank guarantees on customer advances. These amounts are considered restricted cash and are classified as non-current. Generally, lines of credit facilitate this requirement. However, to the extent the required guarantee exceeds the available local line of credit, the Company maintains current restricted cash balances. In addition, the Company is required to maintain a restricted cash balance as a guarantee for the lessor of the building located in Delft, Netherlands, throughout the lease term, which has also been classified as non-current. As of December 31, 2007 and 2006, restricted cash balances were approximately $1.7 million and $1.1 million, respectively.

Concentration of Credit Risk

        Financial instruments which subject the Company to credit risk consist of cash and cash equivalents and accounts receivables. The risk with respect to cash and cash equivalents is minimized by the Company's policy of investing in short-term financial instruments issued by highly-rated financial institutions. The risk with respect to accounts receivables is minimized by the creditworthiness of the Company's customers. The Company performs periodic credit evaluations of its customers' financial condition and generally does not require collateral. Credit losses have been within management's expectations and the allowance for doubtful accounts totaled $1.9 million and $2.4 million as of December 31, 2007 and 2006, respectively. For the years ended December 31, 2007, 2006 and 2005, no single customer exceed 10% of the Company's revenue or accounts receivable.

Inventories

        Components of inventory include raw materials, work-in process, demonstration units and finished goods. Demonstration units include units which are located in the Company's demonstration laboratories and at potential customer sites and are considered available for sale. Finished goods include in-transit systems that have been shipped to the Company's customers, but not yet installed and accepted by the customer. All inventories are stated at the lower of cost or market, cost determined principally by the first-in, first-out, ("FIFO") method for a majority of subsidiaries and by average-cost for one international location. The Company reduces the carrying value of its inventories for differences between the cost and estimated net realizable value taking into consideration usage in the preceding twelve months, expected demand, technological obsolescence and other information including the physical condition of demonstration and in-transit inventories. The Company records as a charge to cost of revenue for the amount required to reduce the carrying value of inventory to net realizable value. Costs associated with the procurement and warehousing of inventories, such as inbound freight

74



charges and purchasing and receiving costs, are also included in the cost of revenue line item within the statement of operations.

Property, Plant and Equipment

        Property, plant and equipment are stated at cost less accumulated depreciation and amortization. Major improvements are capitalized while expenditures for maintenance, repairs and minor improvements are charged to expense. When assets are retired or otherwise disposed of, the assets and related accumulated depreciation are eliminated from the accounts and any resulting gain or loss is reflected in the statement of operations. Depreciation and amortization are calculated on a straight-line basis over the estimated useful lives of the assets as follows:

Buildings   25-39 years
Machinery and equipment   3-10 years
Computer equipment and software   3-5 years
Furniture and fixtures   3-10 years
Leasehold improvements   Lesser of 15 years or the remaining lease term

        Depreciation and amortization expense associated with property, plant and equipment for the years ended December 31, 2007, 2006 and 2005, was approximately $11.3 million, $12.1 million and $10.0 million, respectively.

Goodwill and Intangible Assets

        The Company accounts for goodwill and other intangible assets in accordance with Financial Accounting Standards Board ("FASB") Statement of Financial Accounting Standard ("SFAS") No. 142, Goodwill and Other Intangible Assets ("SFAS No. 142"). SFAS No. 142 requires that goodwill and intangible assets with indefinite useful lives not be amortized. Instead, these assets are tested for impairment on a reportable operating segment basis annually, or on an interim basis when events or changes in circumstances warrant. The impairment test consists of a comparison of the fair value of goodwill or an intangible asset with its carrying amount with any related impairment losses recognized in earnings when incurred. The Company performs its annual test for indications of impairment as of December 31st each year. In accordance with SFAS No. 142, the Company tested for impairment as of December 31, 2007 and 2006, and determined that goodwill and indefinite-lived intangible assets were not impaired.

        Intangible assets with a finite useful life are amortized on a straight-line basis over their estimated useful lives, with periods ranging from 4 to 10 years.

Impairment of Long-Lived Assets

        Impairment losses are recorded on long-lived assets used in operations when indicators of impairment are present and the quoted market price, if available, or the estimated undiscounted operating cash flows generated by those assets are less than the assets' carrying value. Impairment losses are charged to the statement of operations for the difference between the fair value and carrying value of the asset. No impairment losses were recorded on long-lived assets during the years ended December 31, 2007, 2006 and 2005.

Warranty Costs and Deferred Revenue

        The Company typically provides a one year parts and labor warranty with the purchase of equipment. The anticipated cost for this one-year warranty is accrued upon recognition of the sale and is included as a current liability on the accompanying balance sheets. The Company also offers to its customers extended warranty and service agreements extending beyond the initial year of warranty for a

75



fee. These fees are recorded as deferred revenue and amortized ratably into income over the life of the extended warranty contract.

Minority Interest in Consolidated Subsidiaries

        Minority interest on the statement of operations of $299,000, $8,000 and $40,000 for the years ended December 31, 2007, 2006 and 2005, respectively, represents the minority common shareholders' proportionate share of the net loss of InCoaTec GmbH and Bruker Baltic Ltd.

Income Taxes

        The Company accounts for income taxes in accordance with SFAS No. 109, Accounting for Income Taxes ("SFAS No. 109"). SFAS No. 109 requires the asset and liability approach to account for income taxes by recognizing deferred tax assets and liabilities for the expected future tax consequences of differences between the financial statement basis and the tax basis of assets and liabilities, calculated using enacted tax rates in effect for the year in which the differences are expected to be reflected in the tax return. The Company records a valuation allowance to reduce deferred tax assets to the amount that is more likely than not to be realized.

        On January 1, 2007, the Company adopted the provisions of Financial Accounting Standards Board Interpretation No. 48, Accounting for Uncertainty in Income Taxes—an interpretation of FASB Statement No. 109 ("FIN No. 48"). Among other things, FIN No. 48 provides guidance to address uncertainty in tax positions and clarifies the accounting for income taxes by prescribing a minimum recognition threshold which an income tax position must achieve before being recognized in the financial statements. In addition, FIN No. 48 requires expanded annual disclosures, including a rollforward of the beginning and ending aggregate unrecognized tax benefits as well as specific detail related to tax uncertainties for which it is reasonably possible the amount of unrecognized tax benefit will significantly increase or decrease within twelve months. In connection with the adoption of FIN No. 48 the Company recorded a reduction to retained earnings of $0.8 million as of January 1, 2007. The Company had unrecognized tax benefits of approximately $5.7 million as of January 1, 2007, of which $2.0 million, if recognized, would result in a reduction of the Company's effective tax rate.

Customer Advances

        The Company typically requires an advance deposit under the terms and conditions of contracts with customers. These deposits are recorded as a liability until revenue is recognized on the specific contract.

Other Comprehensive Income (Loss)

        Other comprehensive income (loss) refers to revenues, expenses, gains and losses that under accounting principles generally accepted in the United States of America are included in other comprehensive income (loss), but are excluded from net income (loss) as these amounts are recorded directly as an adjustment to stockholders' equity, net of tax. The Company's other comprehensive income (loss) is composed primarily of foreign currency translation adjustments.

Fair Value of Financial Instruments

        The Company's financial instruments consist primarily of cash and cash equivalents, accounts receivable, accounts payable, amounts due from/to affiliated companies and long-term debt. The carrying amounts of the Company's cash and cash equivalents, accounts receivable, accounts payable and amounts due from/to affiliated companies approximate fair value due to their short-term nature. The fair value of long-term debt is estimated based on current interest rates offered to the Company

76



for financing arrangements with similar maturities. The recorded value of these financial instruments approximates their fair value at December 31, 2007 and 2006.

Derivative Financial Instruments

        The Company accounts for derivative financial instruments in accordance with SFAS No. 133, Accounting for Derivative Instruments and Hedging Activities, ("SFAS No. 133") as amended. All derivatives, whether designated in hedging relations or not, are recorded on the balance sheet at fair value. If the derivative is designated as a fair value hedge, the changes in the fair value of the derivative and of the hedged item attributable to the hedged risk are recognized in the results of operations. If the derivative is designated as a cash flow hedge, the effective portions of changes in the fair value of the derivative are recorded in accumulated other comprehensive income and are recognized in the results of operations when the hedged item affects earnings. Ineffective portions of changes in the fair value of cash flow hedges are recognized in the results of operations. For derivative instruments not designated as hedging instruments, changes in fair value are recognized in the results of operations in the current period.

Foreign Currency Translation

        Assets and liabilities of the Company's foreign subsidiaries, where the functional currency is the local currency, are translated into U.S. dollars using year-end exchange rates. Revenues and expenses of foreign subsidiaries are translated at the average exchange rates in effect during the year. Adjustments resulting from financial statement translations are included as a separate component of stockholders' equity. Gains and (losses) resulting from foreign currency transactions are reported in the statement of operations under the caption interest and other income (expense), net, for all periods presented.

Revenue Recognition

        The Company recognizes revenue from system sales when persuasive evidence of an arrangement exists, the price is fixed or determinable, title and risk of loss has been transferred to the customer and collectibility of the resulting receivable is reasonably assured. Title and risk of loss is generally transferred to the customer upon receipt of a signed customer acceptance for a system that has been shipped, installed, and for which the customer has been trained. As a result, the timing of customer acceptance or readiness could cause the Company's reported revenues to differ materially from expectations. When products are sold through an independent distributor, a strategic distribution partner or an unconsolidated affiliated distributor, which assumes responsibility for installation, the Company recognizes the system as revenue when the product has been shipped and title and risk of loss has been transferred. The Company's distributors do not have price protection rights or rights to return; however, our products are warranted to be free from defect for a period of one year. Revenue is deferred until cash is received when a significant portion of the fee is due over one year after delivery, installation and acceptance of a system. For arrangements with multiple elements, the Company recognizes revenue for each element based on the fair value of the element provided when all other criteria for revenue recognition have been met. The fair value for each element provided in multiple element arrangements is typically determined by referencing historical pricing policies when the element is sold separately. Changes in the Company's ability to establish the fair value for each element in multiple element arrangements could affect the timing of revenue recognition.

        Revenue from the sale of accessories and parts is recognized upon shipment and service revenue is recognized as the services are performed.

        Grant revenue is earned from the governments of Germany and the United States for various early-stage research & development projects. Grant revenue is recognized when the Company completes the services required under the grant.

77


Shipping and Handling Costs

        The Company records costs incurred in connection with shipping and handling products as cost of revenue. Amounts billed to customers in connection with these costs are included in revenues and are not material for any of the periods presented in the accompanying financial statements.

Research and Development

        Research and development costs are expensed as incurred.

Software Costs

        Purchased software is capitalized at cost and is amortized over the estimated useful life, generally three years. Software developed for use in the Company's products is expensed as incurred until technological feasibility is reasonably assured and is classified as research and development expense. Subsequent to the achievement of technological feasibility, amounts are capitalizable, however, to date such amounts have not been material.

Advertising

        The Company expenses advertising costs as incurred. Advertising expenses were $3.5 million, $2.7 million and $2.3 million during the years ended December 31, 2007, 2006 and 2005, respectively.

Contingencies

        The Company is subject to proceedings, lawsuits and other claims related to patents, product and other matters. The Company assesses the likelihood of any adverse judgments or outcomes to these matters as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies are made after careful analysis of each individual issue. The required reserves may change in the future due to new developments in each situation or changes in settlement strategy in dealing with these matters.

Stock-Based Compensation

        Effective January 1, 2006, the Company adopted SFAS No. 123 (revised 2004), Share-Based Payment, ("SFAS No. 123(R)"), using the modified prospective method whereby prior periods are not restated for comparability. SFAS No. 123(R) requires recognition of stock-based compensation expense in the statement of operations over the vesting period based on the fair value of the award at the grant date. Previously, the Company used the intrinsic value method under Accounting Principles Board Opinion No. 25, Accounting for Stock Issued to Employees ("APB 25"), as amended by related interpretations of the Financial Accounting Standards Board. Under APB 25, no compensation cost was recognized for stock options because the quoted market price of the stock at the grant date was equal to the amount per share the employee had to pay to acquire the stock after fulfilling the vesting period. SFAS No. 123(R) supersedes APB 25 as well as SFAS No. 123, Accounting for Stock-Based Compensation, which permitted pro forma footnote disclosures to report the difference between the fair value method and the intrinsic value method.

78


        The Company's primary types of share-based compensation are stock options and restricted stock. The Company recorded stock-based compensation expense for the years ended December 31, 2007 and 2006, as follows (in thousands):

 
  2007
  2006
Stock options   $ 1,556   $ 1,090
Restricted stock     605     384
   
 
Total stock-based compensation, pre-tax     2,161     1,474
Tax benefit     608     387
   
 
Total stock-based compensation, net of tax   $ 1,553   $ 1,087
   
 

        The fair value of each option award is estimated on the date of grant using the Black-Scholes option-pricing model. Assumptions regarding volatility, expected term, dividend yield and risk-free interest rate are required for the Black-Scholes model. Volatility and expected term assumptions are based on the Company's historical experience. The risk-free interest rate is based on a U.S. treasury note with a maturity similar to the option award's expected life. The assumptions for volatility, expected life, dividend yield and risk-free interest rate are presented in the table below:

 
  2007
  2006
 
Risk-free interest rate   3.48%-5.21 % 4.30 %
Expected life   6.5 years   5 years  
Volatility   82.0 % 82.0 %
Expected dividend yield   0 % 0 %

        Had compensation expense for the Company's stock option plans during the year ended December 31, 2005, been determined based on the fair value at the grant date, consistent with the methodology prescribed by SFAS No. 148, Accounting for Stock-Based Compensation—Transition and Disclosure, the Company's net income and net income per common share for the year ended December 31, 2005, would have approximated the following pro forma amounts (in thousands, except per share data):

 
  2005
 
Net income, as reported   $ 9,747  
Deduct:        
  Total stock-based compensation expense determined using fair value based method for all awards, net of taxes     (4,278 )
   
 
Net income, pro forma   $ 5,469  
   
 
Net income per common share:        
  Basic and diluted, as reported   $ 0.10  
  Basic and diluted, pro forma   $ 0.05  

        The fair value of each stock option included in the preceding pro forma amounts was estimated using the Black-Scholes option-pricing model with the following weighted average assumptions:

 
  2005
 
Risk-free interest rate   4.25%-4.30 %
Expected life of option   4-5 years  
Volatility   40.0%-80.0 %
Expected dividend yield   0 %

79


Earnings Per Share

        Net income per share is calculated by dividing net income by the weighted-average shares outstanding during the period. The diluted net income per share computation includes the effect of shares which would be issuable upon the exercise of outstanding stock options, reduced by the number of shares which are assumed to be purchased by the Company from the resulting proceeds at the average market price during the period.

        The following table sets forth the computation of basic and diluted average shares outstanding for the years ended December 31, 2007, 2006 and 2005, (in thousands):

 
  2007
  2006
  2005
  Net income, as reported   $ 31,529   $ 18,481   $ 9,747
   
 
 
Weighted average shares outstanding:                  
  Weighted average shares outstanding—basic     103,702     101,512     100,823
  Effect of dilutive securities:                  
    Stock options     3,067     1,049     307
   
 
 
  Weighted average shares outstanding—diluted     106,769     102,561     101,130
   
 
 
  Net income per share—basic and diluted   $ 0.30   $ 0.18   $ 0.10

        Stock options to purchase 583,000 shares, 1,056,000 shares and 2,624,000 shares were excluded from the computation of diluted earnings per share in the years ended December 31, 2007, 2006 and 2005, respectively, because the exercise price of the stock options exceeded the average market price of the Company's common stock and, as a result, would have had an anti-dilutive effect.

Use of Estimates

        The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and reported amounts of revenues and expenses during the reporting period. Actual results could differ from such estimates.

Note 3—Acquisition of Bruker Optics

        On July 1, 2006, the Company completed the acquisition of all of the outstanding stock of Bruker Optics in accordance with the terms of the stock purchase agreement dated as of April 17, 2006. The acquisition of Bruker Optics represented a combination of companies under common control due to the majority ownership of both companies by five related individuals as an affiliated shareholder group. As a result, the acquisition, as it related to the shares owned by these affiliated shareholders (approximately 96%), was accounted for at historical carrying value. The acquisition of the shares of the non-affiliated shareholders (approximately 4%) was accounted for at fair value, in a manner similar to the acquisition of a minority interest. The excess purchase price of the interest not under common control over the fair value of the related net assets was recorded as intangible assets and goodwill.

        Upon completion of the acquisition, the Company paid an aggregate of $135 million of consideration to the Bruker Optics stockholders and holders of Bruker Optics stock options, of which approximately $79 million was paid in cash and approximately $56 million was paid in restricted unregistered shares of Company common stock. The fair value of the consideration paid for the acquisition of the minority interest was approximately $5.2 million, including cash of $4.8 million and common stock valued at $0.4 million. The value of the shares of common stock issued to the non-affiliated shareholder in connection with the merger was determined using a trailing average of the closing market prices of the Company's stock for a period of ten consecutive trading days ending three days prior to the closing of the acquisition, which occurred on July 1, 2006.

80


        The Company engaged RSM McGladrey, Inc., a third party valuation firm, to assist management in appraising the fair value of certain assets acquired. The appraisal was completed in the second quarter of 2007. The following table summarizes the estimated fair values of assets acquired and liabilities assumed at the date of acquisition of the minority interest (in thousands):

Current assets   $ 42,387  
Property, plant and equipment     13,174  
Intangible assets     53,846  
Other assets     72  
   
 
  Total assets acquired     109,479  
   
 
Current liabilities     34,488  
Long-term debt     3,463  
Other long-term liabilities     2,074  
   
 
  Total liabilities assumed     40,025  
   
 
Net assets     69,454  
Minority interest percentage     4.1 %
   
 
Net assets acquired     2,848  
Goodwill     2,294  
   
 
  Total purchase price   $ 5,142  
   
 

        The purchase price for the 4.1% minority interest acquired was allocated to the net assets acquired on a pro rata basis in accordance with SFAS No. 141, Business Combinations. Accordingly, estimated acquisition related intangibles total $2.2 million and are being amortized over four years. In addition, approximately $2.7 million of acquired intangible assets were assigned to in-process research and development projects of which the 4.1% minority interest, or approximately $0.1 million, was written off at the date of acquisition in accordance with FASB Interpretation No. 4, Applicability of FASB Statement No. 2 to Business Combinations Accounted for by the Purchase Method. The projects that were estimated to qualify as acquired in-process research and development projects were those that had not yet reached technology feasibility and for which no future alternative uses existed.

        The $2.3 million of goodwill acquired from Bruker Optics in connection with the merger was assigned to the Company's direct wholly-owned subsidiary Bruker Optics Inc., and will not be deductible for tax purposes since the merger was a tax-free merger.

Note 4—Other Acquisitions

        On June 30, 2007, the Company acquired Analys-Konsult AB ("AKAB"), a distributor and service provider of scientific instrumentation based in Sweden. The results of AKAB have been included in the Bruker AXS segment from the date of acquisition. The aggregate purchase price of AKAB was approximately $0.8 million, of which approximately $0.5 million was paid in cash and approximately $0.3 million was funded by the issuance of an aggregate of 29,740 restricted unregistered shares of the Company's common stock, par value $0.01 per share, to AKAB's shareholders.

        On January 1, 2007, the Company acquired all of the assets of Keca Metal Products, Ltd. ("Keca"), a Texas partnership located in Spring, Texas. The results of Keca have been included in the Bruker Optics segment from the date of acquisition. Keca provides specialized machining services, primarily to Bruker Optics. In addition, on November 26, 2007, the Company acquired all of the assets of Micron Optical Systems, Inc. ("Micron"). The results of Micron have been included in the Bruker Optics segment from the date of acquisition. The aggregate purchase price for Keca and Micron was $0.6 million and $0.8 million, respectively, and was funded primarily with cash on hand.

81


        The Company recorded $1.6 million of goodwill in connection with the acquisition of AKAB, Keca and Micron in 2007. The goodwill related to AKAB was assigned to the Bruker AXS segment. The goodwill related to the asset acquisitions of Keca and Micron were assigned to the Bruker Optics segment.

        Pro forma financial information reflecting the AKAB acquisition has not been presented as the impact on revenues, net income and net income per common share would not have been material.

        On September 6, 2006, the Company acquired all of the capital stock of Quantron GmbH, an OES-spark company based in Germany ("Quantron"). The results of Quantron have been included in the Bruker AXS segment from the date of acquisition. In accordance with the stock purchase agreement, at the closing, the Company paid an aggregate of approximately $6.5 million of consideration to the Sellers, of which approximately $5.2 million was paid in cash and approximately $1.3 million was paid in the issuance of an aggregate of 202,223 restricted unregistered shares of the Company's common stock, par value $0.01 per share, to Quantron's two largest shareholders. Pursuant to the earn-out provisions of the stock purchase agreement, up to an aggregate of $4.9 million of additional cash consideration may be paid through 2009 based on future performance of Quantron, which will be treated as additional purchase price. No additional consideration has been earned as of December 31, 2007.

        On July 18, 2006, the Company acquired all of the capital stock of KeyMaster Technologies, Inc. ("KeyMaster"), a Delaware corporation located in Kennewick, Washington. The results of KeyMaster have been included in the Bruker AXS segment from the date of acquisition. The aggregate purchase price for KeyMaster was $10.0 million and was funded by incurring additional debt.

        On January 17, 2006, the Company acquired Socabim SAS ("Socabim"), a privately-held company focused on advanced X-ray analysis software for materials research based in France. The results of Socabim have been included in the Bruker AXS segment from the date of acquisition. The initial aggregate purchase price of approximately $8.6 million was paid through the issuance of 267,302 restricted shares of common stock of the Company to Socabim's two largest shareholders, which had an aggregate value of approximately $1.3 million as of the date of issuance, and an aggregate of $7.3 million was paid to all of the Socabim selling shareholders from cash on hand. Additional cash consideration, in the amount of approximately $1.5 million in total, may be paid through 2009 based on the future performance of Socabim, which will be accounted for as additional purchase price. As of December 31, 2007, $0.4 million of additional consideration has been earned. Prior to the acquisition, the Company licensed from Socabim software that is used in various Bruker AXS systems. Bruker AXS was Socabim's principal customer before the acquisition which required the Company to evaluate the preexisting relationship with Socabim in accordance with Emerging Issues Task Force No. 04-1, Accounting for Preexisting Relationships between the Parties to a Business Combination. EITF 04-1 requires an analysis to be performed to determine whether there has been an effective settlement of a preexisting executory contract that was either favorable or unfavorable to the acquirer. To the extent there was an executory contract that was either favorable or unfavorable to the acquirer, a gain or loss is recognized. Management determined there was no settlement of a preexisting executory contract in the acquisition of Socabim and, accordingly, no gain or loss was recognized.

        The Company recorded $19.5 million of goodwill in connection with the acquisition of Quantron, KeyMaster and Socabim in 2006 and assigned the goodwill to each individual subsidiary. The valuation of the net assets acquired in connection with certain of these acquisitions was finalized in 2007 and did not result in any material adjustments to goodwill.

        Pro forma information to reflect the Quantron, KeyMaster and Socabim acquisitions has not been presented as the impact on revenues, net income and net income per common share would not have been material.

82


Note 5—Accounts Receivable

        The following is a summary of trade accounts receivable at December 31, (in thousands):

 
  2007
  2006
 
Gross accounts receivable   $ 116,828   $ 82,014  
Allowance for doubtful accounts     (1,890 )   (2,410 )
   
 
 
  Accounts receivable, net   $ 114,938   $ 79,604  
   
 
 

Note 6—Inventories

        Inventories consisted of the following as of December 31, (in thousands):

 
  2007
  2006
Raw materials   $ 54,743   $ 45,361
Work-in process     50,634     42,269
Demonstration units     19,801     14,678
Finished goods     46,154     32,196
   
 
Total inventories   $ 171,332   $ 134,504
   
 

        Demonstration units include systems located in the Company's demonstration laboratories and at potential customer sites and are considered available for sale. Finished goods include in-transit systems that have been shipped to the Company's customers but not yet installed and accepted by the customer. As of December 31, 2007 and 2006, inventory-in-transit was $34.4 million and $24.1 million, respectively.

Note 7—Property, Plant and Equipment

        The following is a summary of property, plant and equipment by major class of asset as of December 31, (in thousands):

 
  2007
  2006
 
Land   $ 12,173   $ 10,437  
Building and leasehold improvements     104,587     88,530  
Machinery and equipment     85,164     72,967  
   
 
 
      201,924     171,934  
Less accumulated depreciation and amortization     (98,824 )   (81,585 )
   
 
 
Property, plant and equipment, net   $ 103,100   $ 90,349  
   
 
 

83


Note 8—Goodwill and Other Intangible Assets

        The following is a summary of other intangible assets subject to amortization as of December 31, (in thousands):

 
   
  2007
  2006
 
  Useful
Lives
in Years

  Gross
Carrying
Amount

  Accumulated
Amortization

  Net
Carrying
Amount

  Gross
Carrying
Amount

  Accumulated
Amortization

  Net
Carrying
Amount

Existing technology and related patents   4-5   $ 6,249   $ (3,022 ) $ 3,227   $ 6,172   $ (1,916 ) $ 4,256
Customer relationships   5     1,115     (477 )   638     1,108     (288 )   820
Trade names   5-10     439     (176 )   263     718     (215 )   503
       
 
 
 
 
 
  Total amortizable intangible assets       $ 7,803   $ (3,675 ) $ 4,128   $ 7,998   $ (2,419 ) $ 5,579
       
 
 
 
 
 

        For the years ended December 31, 2007, 2006 and 2005, the Company recorded amortization expense of approximately $1.3 million, $1.2 million and $0.5 million, respectively, related to other amortizable intangible assets.

        The estimated future amortization expense related to amortizable intangible assets over the next five years is as follows (in thousands):

2008   $ 1,228
2009     1,177
2010     1,109
2011     565
2012     49
   
Total   $ 4,128
   

        The carrying amount of goodwill as of December 31, 2007 and 2006, was $40.8 million and $39.8 million, respectively. The Company performs its annual test for indications of impairment as of December 31st each year. The Company completed its annual test for impairment as of December 31, 2007 and 2006, and determined that goodwill was not impaired at that time.

Note 9—Other Current Liabilities

        The following is a summary of accrued and other current liabilities as of December 31, (in thousands):

 
  2007
  2006
Accrued compensation   $ 29,722   $ 24,449
Deferred revenue     24,416     16,661
Accrued warranty     13,994     13,274
Current portion of deferred tax liability     7,293     12,563
Income taxes payable     18,949     7,010
Accrued professional services     5,827     4,213
Accrued VAT and sales and use taxes     185     4,199
Accrued expenses     24,086     12,438
   
 
Total other current liabilities   $ 124,472   $ 94,807
   
 

        The Company typically provides a one-year parts and labor warranty with the purchase of equipment. The anticipated cost for this one-year warranty is accrued upon recognition of the sale and is included as a current liability on the balance sheet. The Company also offers to its customers warranty and service agreements extending beyond the initial year of warranty for a fee. These fees are

84



recorded as deferred revenue and amortized into income over the life of the extended warranty contract.

Warranty accrual at December 31, 2005   $ 9,326  
Accruals for warranties issued during the period     12,145  
Settlements of warranty claims     (9,019 )
Foreign currency impact     822  
   
 
Warranty accrual at December 31, 2006     13,274  
Accruals for warranties issued during the period     9,200  
Settlements of warranty claims     (9,428 )
Foreign currency impact     948  
   
 
Warranty accrual at December 31, 2007   $ 13,994  
   
 

Note 10—Debt

        The Company's debt obligations consist of the following as of December 31, (in thousands):

 
  2007
  2006
 
Two Euro bank loans at fixed rate of 4.65%, collateralized by land and buildings of Bruker Daltonik GmbH, monthly interest payments, due and payable through 2008   $ 11,192   $ 10,115  

Euro bank loan at fixed rate of 3.05%, collateralized by land and buildings of Bruker Daltonik GmbH, monthly interest payments, due and payable through 2008

 

 

5,107

 

 

4,616

 

Euro bank loan at fixed rate of 2.95%, collateralized by land and buildings of Bruker Daltonik GmbH, monthly principal and interest payments due and payable through 2010

 

 

1,786

 

 

2,282

 

Euro mortgage loan at 6-month European Interbank Offered Rate (EURIBOR) (4.71% at December 31, 2007) plus 1.00%, collateralized by a building located in Karlsruhe, Germany, biannual principal and interest payments due and payable through October 2012

 

 

2,918

 

 

3,033

 

Two Euro bank loans at fixed rate of 4.65% and 8.01%, respectively, collateralized by certain Bruker AXS accounts receivables, biannual principal payments and quarterly interest payments, due and payable through March 2013

 

 

308

 

 

299

 

Euro mortgage loan at 6-month European Interbank Offered Rate (EURIBOR) (4.71% at December 31, 2007) plus 0.75%, collateralized by a building located in Ettlingen, Germany, biannual principal and interest payments due and payable through October 2011

 

 


 

 

422

 

State of Wisconsin industrial revenue bonds at variable interest rate based on the Securities Industry and Financial Markets Association Municipal Swap Index (3.42% at December 31, 2007), collateralized by an irrevocable letter of credit, annual principal payments and monthly interest payments, due and payable through December 2013

 

 

1,460

 

 

1,660

 

Japanese Yen bank loan at a fixed rate of 1.8%, uncollateralized, quarterly principal and interest payments due and payable through 2009

 

 

403

 

 

629

 

Japanese Yen bank loan at a fixed rate of 2.03%, uncollateralized, quarterly principal and interest payments due and payable through 2011

 

 

1,878

 

 

2,268

 
   
 
 

Total long-term debt

 

 

25,052

 

 

25,324

 

Less: current portion of long-term debt

 

 

(18,658

)

 

(2,461

)
   
 
 

Total long-term debt, less current portion

 

$

6,394

 

$

22,863

 
   
 
 

85


        Annual maturities of long-term debt are as follows (in thousands):

2008   $ 18,658
2009     2,235
2010     1,688
2011     1,170
2012     963
Thereafter     338
   
Total   $ 25,052
   

        The State of Wisconsin industrial revenue bonds (IRB) were entered into in 1999 in connection with the construction of Bruker AXS' building in Madison, Wisconsin. Bruker AXS has an interest rate swap associated with the IRB which is not designated as a hedge. Bruker AXS pays a 4.60% fixed rate of interest and receives a variable rate of interest based on the Securities Industry and Financial Markets Municipal Swap Index. The contract has a $1.7 million notional value which decreases in conjunction with the IRB payment schedule until the swap and IRB agreements terminate in December 2013. The fair value of the swap, obtained from dealer quotes, resulted in a loss of $0.1 million during each of the years ended December 31, 2007 and 2006. Interest payments receivable and payable under the terms of the swap are accrued over the period and are treated as an adjustment to interest expense. The letter of credit is renewable upon mutual agreement of Bruker AXS and the financial institution. If the letter of credit is not renewed and Bruker AXS is unable to obtain a similar letter of credit with another financial institution, the IRB may be callable at the option of the bond trustee. The Company's outstanding letter of credit expires in December 2008 and is collateralized by substantially all of the assets of Bruker AXS. The letter of credit contains various financial and other covenants. As of December 31, 2007, the latest measurement date, the Company was in compliance with the required debt service coverage ratio associated with the IRB.

        The Company maintains lines of credit at financial institutions in the United States, Germany, Japan and France with an aggregate maximum credit amount of approximately $121.0 million and $75.3 million at December 31, 2007 and 2006, respectively. As of December 31, 2007 and 2006, the Company had outstanding borrowings of approximately $13.1 million and $19.4 million, respectively. Taking outstanding letters of credit into consideration, the Company had availability of approximately $94.7 million and $46.8 million at December 31, 2007 and 2006, respectively. For the line of credit in the United States, the Company issued a demand promissory note to Citizens Bank for $40 million in July 2006, which was increased to $75 million in September 2007. The note bears interest at the bank's prime rate, LIBOR plus 1%, or a LIBOR advantage rate plus 1% at the request of the Company. All of the Company's obligations under the line of credit are secured by the pledge to the bank of 100% of the capital stock of each of the Company's wholly-owned domestic subsidiaries, each of which also pledged a portion of the stock of certain of their foreign subsidiaries. As of December 31, 2007, $75 million of the United States line of credit was available. For the lines of credit in Germany, which are unsecured, interest is paid monthly on outstanding borrowings based on the banks' variable interest rates, which were between 4.94%-9.75% at December 31, 2007. For the lines of credit in Japan, the interest rates were between 1.50% and 1.79% at December 31, 2007, and these lines of credit have no maturity date and are uncollateralized. For the line of credit in France, which is unsecured, interest is paid monthly on outstanding borrowings based on the floating rate used by French institutions (TMM) of TMM plus 0.75%, which was 4.69% at December 31, 2007.

        Interest expense for the years ended December 31, 2007, 2006 and 2005, was $1.8 million, $2.2 million and $2.1 million, respectively.

86


Note 11—Derivative Instruments and Hedging Activities

Interest Rate Risk Management

        The Company is party to interest rate swaps and cross currency rate swaps in order to minimize the volatility that changes in interest rates might have on earnings and cash flows.

        In 1999, the Company entered into an interest rate swap arrangement to pay a 4.60% fixed rate of interest and receive a variable rate of interest based on the Securities Industry and Financial Markets Municipal Swap Index through December 2013. The notional amount of the interest rate swap arrangement was $1.7 million at December 31, 2007 and 2006, respectively. Effective January 1, 2003, the Company determined that the interest rate swap was no longer an effective hedge as defined by SFAS No. 133 in offsetting the change in interest cash flows being hedged and, accordingly, the changes in the swap's fair value are being recorded in current earnings in interest and other income (expense), net in the consolidated statements of operations. The Company obtains third-party verification of fair value at the end of each reporting period. As of December 31, 2007 and 2006, this interest rate swap had a fair value of $(0.1) million and is recorded in other current liabilities.

        In 2002, the Company entered into a cross currency interest rate swap arrangement under which the Company receives semiannual interest payments in EUROs based on a variable interest rate equal to the six-month EURIBOR rate in exchange for semiannual payments in Swiss francs at a fixed rate of 4.97% through December 2011. The notional amount of this interest rate swap arrangement was €5.0 million. The instrument was considered a speculative derivative financial instrument, and as such, did not qualify for hedge accounting under SFAS No. 133. Accordingly, the changes in the fair value of the swap are being recorded in current earnings in interest and other income (expense), net in the consolidated statements of operations. The Company obtains third-party verification of fair value at the end of each reporting period. As of December 31, 2007 and 2006, this interest rate swap had a fair value of $0.6 million and $0.2 million, respectively, and was recorded in other current assets.

        In addition, the Company entered into a second interest rate swap arrangement during 2002 that reduced the 6-month EURIBOR rate by 1.80% through January 2007. The notional amount of this interest rate swap arrangement was €3.0 million. The instrument was also considered a speculative derivative financial instrument, and as such, did not qualify for hedge accounting under SFAS No. 133. As of December 31, 2006, this interest rate swap had a fair value of less than $(0.1) million.

Foreign Exchange Rate Risk Management

        The Company generates a substantial portion of its revenues and expenses in international markets, principally Europe and Japan, which subjects its operations to the exposure of exchange rate fluctuations. The impact of currency exchange rate movement can be positive or negative in any period. The Company, from time to time, has entered into foreign exchange rate contracts in order to minimize the volatility that fluctuations in currency exchange rates will have on the Company's cash flows related to purchases and sales denominated in foreign currencies.

        At December 31, 2007 and 2006, the Company had option and forward currency exchange contracts, with notional amounts aggregating $15.0 million and $14.4 million, respectively. The contracts involved the purchase of EURO currency at fixed U.S. dollar amounts on specified dates and had maturities of less than twelve months. The notional amounts of the contracts are intended to hedge receivables in U.S. dollars. However, these transactions do not qualify for hedge accounting under SFAS No. 133. Accordingly, the instruments are marked-to-market with the corresponding gains and losses recorded in other income (expense), net in the consolidated statements of operations. The Company obtains third-party verification of fair value at the end of each reporting period. As of December 31, 2007 and 2006, the currency exchange contracts had a fair value of less than $0.1 million and $1.0 million, respectively, and are recorded in other current assets.

87


Note 12—Income Taxes

        The domestic and foreign components of income (loss) before income taxes are as follows for the years ended December 31, (in thousands):

 
  2007
  2006
  2005
 
Domestic   $ (2,103 ) $ (5,712 ) $ (5,850 )
Foreign     50,715     40,132     27,492  
   
 
 
 
    $ 48,612   $ 34,420   $ 21,642  
   
 
 
 

        The components of the income tax provision are as follows for the years ended December 31, (in thousands):

 
  2007
  2006
  2005
 
Current income tax expense:                    
  Federal   $   $ (656 ) $ 130  
  State     488     350     81  
  Foreign     18,325     14,825     12,959  
   
 
 
 
    Total current income tax expense     18,813     14,519     13,170  
Deferred income tax (benefit) expense                    
  Federal         83     (316 )
  State         14     (93 )
  Foreign     (2,029 )   1,315     (906 )
   
 
 
 
    Total deferred     (2,029 )   1,412     (1,315 )
   
 
 
 
Income tax provision   $ 16,784   $ 15,931   $ 11,855  
   
 
 
 

        A reconciliation of the United States federal statutory tax rate to the effective income tax rate is as follows for the years ended December 31:

 
  2007
  2006
  2005
 
Statutory tax rate   34.0 % 34.0 % 34.0 %
Tax contingencies   2.3     0.5  
State income taxes, net of federal benefit   0.7   0.6   (0.3 )
Change in German tax rate   (7.6 )    
Foreign tax rate differential   (0.1 ) 10.3   6.2  
Foreign subsidiary dividends     1.8   3.6  
Research and development credits     (4.5 ) (3.9 )
Other   (0.3 ) 0.8   0.3  
   
 
 
 
Effective tax rate before valuation allowance   29.0   43.0   40.4  
Change in valuation allowance for unbenefited losses   5.5   3.3   14.4  
   
 
 
 
Effective tax rate   34.5 % 46.3 % 54.8 %
   
 
 
 

88


        The tax effects of temporary items that give rise to significant portions of the deferred tax assets and liabilities are as follows as of December 31, (in thousands):

 
  2007
  2006
 
Deferred tax assets:              
  Accounts receivable   $   $ 277  
  Inventory     6,328     5,802  
  Compensation     1,860     2,002  
  Investments     9,104     1,467  
  Warranty reserve     1,434     1,135  
  Purchase accounting intangibles     216      
  R&D and other tax credit carryforwards     11,056     13,511  
  Net operating loss carryforwards     7,931     4,611  
  Capital loss carryforwards     3,652     5,300  
  Accrued expenses     1,448     117  
  Other     4,661     1,907  
   
 
 
  Gross deferred tax assets     47,690     36,129  
  Less valuation allowance     (34,000 )   (28,095 )
   
 
 
    Total deferred tax assets     13,690     8,034  
   
 
 
Deferred tax liabilities:              
  Foreign statutory reserves     (9,852 )   (12,304 )
  Excess tax over book depreciation     (2,787 )   (3,234 )
  Purchase accounting intangibles         (450 )
  Accounts receivable     (570 )    
  Inventory     (2,303 )    
  Other     (1,125 )   (1,763 )
   
 
 
    Total deferred tax liabilities     (16,637 )   (17,751 )
   
 
 
Net deferred tax liability   $ (2,947 ) $ (9,717 )
   
 
 

        The valuation allowance was determined in accordance with the provision of SFAS No. 109, which requires an assessment of both positive and negative evidence when determining whether it is more likely than not that deferred tax assets are recoverable. Such assessment is required on a jurisdiction-by-jurisdiction basis. The Company fully reserved all U.S. net deferred tax assets, which are predominantly net operating losses and tax credit carryforwards. Cumulative losses incurred in the U.S. jurisdiction as of December 31, 2005, 2006 and 2007, represented sufficient negative evidence to record a valuation allowance under SFAS No. 109. The Company intends to maintain a full valuation allowance until sufficient positive evidence exists to support the reversal of the valuation allowance.

        As of December 31, 2007, the Company has approximately $18.9 million of U.S. net operating loss carryforward available to reduce future taxable income; which expire at various times through the year 2027. The Company claimed a capital loss on their 2006 U.S. tax return of approximately $9.1 million which can be carried forward 5 years. The Company also has tax credits of approximately $11.1 million available to offset future tax liabilities that expire at various dates. These credits include foreign tax credits of $8.0 million expiring in year 2017 and research and development tax credits of $3.1 million expiring in year 2025. These operating losses and tax credit carryforward may be subject to limitations under provisions of the Internal Revenue Code.

        On August 14, 2007, the German Business Tax Reform 2008 was signed by the Federal President and the legislative process was finalized on August 17, 2007, with the official publication of the law. This new legislation changes the German Federal Corporate Tax Rate from 25% to 15%. In addition,

89



German Trade Tax is no longer deductible from the Corporate Income Tax. This law change, due to the benefit of revaluing our deferred tax assets and liabilities, reduced the Company's effective tax rate by 7.6%

        The Company has permanently reinvested the earnings of its subsidiaries in the cumulative amount of approximately $104.8 million as of December 31, 2007, and has not provided for U.S. income taxes that could result from the distribution of these earnings to the U.S. parent. If these earnings were ultimately distributed to the U.S. in the form of dividends or otherwise, or if the shares of the subsidiaries were sold or transferred, the Company would likely be subject to additional U.S. income taxes, net of the impact of any available foreign tax credits. It is not practical to estimate the amount of unrecognized deferred U.S. income taxes on these undistributed earnings.

        The Company has unrecognized tax benefits of approximately $7.3 million as of December 31, 2007, of which $3.1 million, if recognized, would result in a reduction of the Company's effective tax rate. As of December 31, 2007, the Company does not expect any material changes to unrecognized tax positions within the next twelve months. A tabular reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

Gross unrecognized tax benefits at January 1, 2007   $ 5,741    
Gross increases—tax positions in prior periods        
Gross decreases—tax positions in prior periods        
Gross increases—current period tax positions     1,519    
Settlements        
Lapse of statute of limitations        
   
 
Gross unrecognized tax benefits at December 31, 2007   $ 7,260    
   
 

        The Company recognizes penalties and interest related to unrecognized tax benefits in the provision for income taxes. As of December 31, 2007, we had approximately $0.6 million of accrued interest related to uncertain tax positions included in the liability on the consolidated balance sheet, of which $0.2 million was recorded during the twelve months ended December 31, 2007.

        The Company considers its significant tax jurisdictions to include Germany and the United States. The tax years 2003 to 2007 are open tax years in these major taxing jurisdictions. The Company files returns in many foreign and state jurisdictions with varying statutes of limitations.

        On October 22, 2004, the American Jobs Creation Act (AJCA) was signed into law and includes a deduction of 85% of certain foreign earnings that are repatriated, as defined in the AJCA. Bruker Optics repatriated approximately $1.2 million in 2005 and recognized a related tax expense of $0.1 million in 2005.

        The Company acquired $1.4 million of net operating losses with its acquisition of Roentec in 2005. A full valuation allowance was provided for in the purchase price allocation as the utilization of the net operating loss could not be assured. If this tax benefit is subsequently realized, it will be recorded as an adjustment to goodwill.

Note 13—Employee Benefit Plans

        The Company maintains or sponsors various defined contribution plans and a defined benefit retirement plan that cover certain domestic and international employees. The Company may make contributions to these plans at its discretion. Retirement benefits earned are generally based on years of service and compensation during active employment. Eligibility is generally determined in accordance with local statutory requirements. However, the level of benefits and terms of vesting may vary among plans. The Company contributed approximately $1.6 million, $1.6 million and $1.3 million to such plans in 2007, 2006 and 2005, respectively.

90


        Substantially all of the Bruker AXS GmbH employees, who were employed by the Company on September 30, 1997, participate in a defined benefit pension plan. The plan provides pension benefits based upon average salary and years of service. The Company has elected to recognize the impact on the projected benefit obligation when actual experience differs from actuarial assumptions on an immediate basis. The Company did not recognize any actuarial losses (gains) during the years ended December 31, 2007, 2006 and 2005, respectively.

        The changes in benefit obligations and plan assets under the defined benefit pension plans, accumulated benefit obligations and funded status of the plan were as follows at December 31, (in thousands):

 
  2007
  2006
 
Change in benefit obligation              
Benefit obligation at beginning of year   $ 11,116   $ 8,689  
Service cost     983     686  
Interest cost     517     381  
Benefits paid     (144 )   (116 )
Actuarial loss (gain)     (760 )   370  
Currency translation adjustment and other     1,221     1,106  
   
 
 
Benefit obligation at end of year     12,933     11,116  

Change in plan assets

 

 

 

 

 

 

 
Fair value of plan assets at beginning of year          
Employer contribution     144     116  
Benefits paid     (144 )   (116 )
   
 
 
Fair value of plan assets at end of year          
Funded status   $ (12,933 ) $ (11,116 )
   
 
 
Accumulated benefit obligation   $ (12,637 ) $ (10,926 )
   
 
 

        Weighted-average assumptions used to determine the projected benefit obligations for the years ended December 31, 2007, 2006 and 2005, are as follows:

 
  2007
  2006
  2005
 
Discount rate   5.50 % 4.50 % 4.25 %
Expected return on assets   0.00 % 0.00 % 0.00 %
Rate of compensation increase   4.00 % 2.50 % 2.50 %

        The net periodic pension benefit cost includes the following components for the years ended December 31, 2007, 2006 and 2005, (in thousands):

 
  2007
  2006
  2005
 
Components of net periodic benefit cost                    
Service cost   $ 983   $ 686   $ 632  
Interest cost     517     381     381  
Amortization     (17 )   (15 )   (15 )
   
 
 
 
Net periodic benefit cost   $ 1,483   $ 1,052   $ 998  
   
 
 
 

91


        To date, the Company has not funded the plan and is not required to make contributions during 2008. The Company expects to pay the following in benefits under the plan (in thousands):

2008   $ 155
2009     276
2010     427
2011     653
2012     651
Thereafter     10,771
   
Total   $ 12,933
   

Note 14—Commitments and Contingencies

Operating Leases

        Certain vehicles, office equipment and buildings are leased under agreements that are accounted for as operating leases. Total rental expense under operating leases was $4.6 million, $3.2 million and $2.6 million during the years ended December 31, 2007, 2006 and 2005, respectively. Future minimum lease payments under non-cancelable operating leases at December 31, 2007, for each of the next five years and thereafter are as follows (in thousands):

2008   $ 4,902
2009     4,604
2010     3,670
2011     3,441
2012     3,465
Thereafter     1,284
   
Total minimum lease payments   $ 21,366
   

License Agreements

        The Company has entered into license agreements allowing it to utilize certain patents. If these patents are used in connection with a commercial product sale, the Company pays royalties ranging from 0.15% to 5.00% on the related product revenues. Licensing fees for the years ended December 31, 2007, 2006 and 2005, were approximately $1.2 million, $1.6 million and $1.0 million, respectively.

Grants

        The Company's indirect subsidiary, Bruker Daltonik GmbH, is the recipient of grants from German government authorities. The grants were made in connection with the Company's development of specific spectrometers and components of spectrometers. Total grants awarded to date amount to $10.6 million and the agreements under which these grants were awarded expire in 2008. Amounts received under these grants during 2007, 2006 and 2005, totaled $0.6 million, $0.7 million and $2.0 million, respectively, and are classified in other revenue. Total expenditures related to these grants were approximately $1.5 million, $2.1 million and $3.9 million in 2007, 2006 and 2005, respectively.

        The Company's wholly-owned direct subsidiary, Bruker Daltonics Inc., is the recipient of a grant from an agency of the United States government. The grant was made in direct connection with the Company's development of a standalone monitor for chemical agents. Total grants awarded to date amount to $1.0 million and the agreement under which this grant was awarded has been extended to 2010. Amounts received under this grant during 2007, 2006 and 2005, totaled $0.1 million, $0.4 million

92



and $0.5 million, respectively, and are classified as other revenue. Total expenditures related to this grant approximate grant revenues received.

        The Company's wholly-owned indirect subsidiary, Bruker Optik GmbH, is the recipient of certain grants from the German government. The grants were made in connection with the Company's development of specific advanced vibrational spectroscopy equipment. Total awards granted to date total $1.7 million. Amounts received under these grants during 2007, 2006 and 2005, totaled $0.2 million, $0.1 million and $0.3 million, respectively, and are classified in other revenue. Total expenditures related to these grants approximated the grant revenues received.

Legal

        Lawsuits, claims and proceedings of a nature considered normal to its businesses may be pending from time to time against the Company. The Company believes the outcome of these proceedings, if any, will not have a material impact on the Company's financial position or results of operations. As of December 31, 2007 and 2006, no accruals have been recorded for such potential contingencies.

Letters of Credit and Guarantees

        At December 31, 2007 and 2006, the Company had bank guarantees of $13.2 million and $9.1 million, respectively, for its customer advances. These guarantees affect the availability of its lines of credit.

Indemnifications

        The Company enters into standard indemnification arrangements in the Company's ordinary course of business. Pursuant to these arrangements, the Company indemnifies, holds harmless, and agrees to reimburse the indemnified parties for losses suffered or incurred by the indemnified party, generally our business partners or customers, in connection with any patent, or any copyright or other intellectual property infringement claim by any third party with respect to our products. The term of these indemnification agreements is generally perpetual anytime after the execution of the agreement. The maximum potential amount of future payments the Company could be required to make under these agreements is unlimited. The Company has never incurred costs to defend lawsuits or settle claims related to these indemnification agreements. As a result, the Company believes the estimated fair value of these agreements is minimal.

        The Company has entered into indemnification agreements with its directors and officers that may require the Company to: indemnify its directors and officers against liabilities that may arise by reason of their status or service as directors or officers, other than liabilities arising from willful misconduct of a culpable nature; advance their expenses incurred as a result of any proceeding against them as to which they could be indemnified; and obtain directors' and officers' insurance if available on reasonable terms, which the Company currently has in place.

Note 15—Shareholders' Equity

Public Offerings of Common Stock

        On February 12, 2007, the Company and a group of selling stockholders completed a public offering of 11,960,000 shares of its common stock, of which 2,530,000 were sold by the Company and 9,430,000 were sold by four selling stockholders, at $7.10 per share, generating net proceeds of approximately $16.9 million to the Company and approximately $63.2 million to the selling stockholders, in the aggregate.

93


Issuance of Restricted Stock

        In November 2007, the Company issued 8,753 shares of restricted stock in connection with the acquisition of certain assets of Micron. The restrictions are time based and will expire after 90 days.

        In June 2007, the Company issued 29,740 shares of restricted stock in connection with the acquisition of Analys-Konsult. The restrictions are time based and will expire ratably as the shares vest over a period of three years.

        In September 2006, the Company issued 202,223 shares of restricted stock in connection with the acquisition of Quantron. The restrictions are time based and will expire ratably as the shares vest over a period of three years.

        In January 2006, the Company issued 267,302 shares of restricted stock in connection with the acquisition of Socabim SAS. The restrictions are time based and will expire ratably as the shares vest over a period of three years.

        In November 2005, the Company issued 209,271 shares of restricted stock in connection with the acquisition of Roentec AG. The restrictions are time based and will expire ratably as the shares vest over a period of three years.

        Restricted shares of the Company's common stock are periodically awarded to executive officers, directors and certain key employees of the Company under the Company's Amended and Restated 2000 Stock Option Plan. See the section "Stock Plans" for information about restricted stock awarded during the year ended December 31, 2007.

Blank Check Preferred Stock

        As of December 31, 2007, 5,000,000 shares of Blank Check Preferred Stock with a stated par value of $0.01 per share have been authorized, none of which have been issued.

Dividends

        The terms of some of the Company's indebtedness restrict its ability to pay dividends to its shareholders.

Stock Plans

        In 2000, the Board of Directors adopted and the stockholders approved the 2000 Stock Option Plan. The 2000 Stock Option Plan provides for the issuance of up to 2,200,000 shares of common stock in connection with awards under the Plan. The 2000 Stock Option Plan allows a committee of the Board of Directors (the "Committee") to grant incentive stock options, non-qualified stock options, stock appreciation rights and stock awards (including the use of restricted stock and phantom shares). The Committee has the authority to determine which employees will receive the rewards, the amount of the awards and other terms and conditions of the award. Awards granted by the Committee typically vest over a period of three-to-five years.

        On July 1, 2003, the Company's stockholders approved an amendment and restatement of the 2000 Stock Option Plan to change the plan name and increase the number of shares available for issuance. The name of the amended plan is Bruker BioSciences Corporation Amended and Restated 2000 Stock Option Plan. The amendment authorized 4,132,000 additional shares of common stock of the Company issuable pursuant to the plan. On June 29, 2006, the Company's stockholders approved an increase in the number of shares available for issuance under the plan from 6,320,000 shares to 8,000,000 shares, an increase of 1,680,000 shares.

94


        Restricted shares of the Company's common stock are periodically awarded to executive officers, directors and certain key employees of the Company subject to a service restriction which expires ratably over a period of three-to-five years. The restricted shares of common stock may not be sold or transferred during the restriction period. Stock compensation for restricted stock is recorded based on the stock price on the grant date and charged to expense ratably through the restriction period. The following table summarizes information about restricted stock activity during the years ended December 31, 2007 and 2006:

 
  Shares Subject to Restriction
  Weighted Average Grant Date Fair Value
Outstanding at December 31, 2005     $
  Granted   632,900     5.28
  Vested      
  Forfeited   (4,700 )   5.00
   
 
Outstanding at December 31, 2006   628,200   $ 5.29
  Granted   81,352     8.68
  Vested   (130,480 )   5.34
  Forfeited   (9,670 )   6.60
   
 
Outstanding at December 31, 2007   569,402   $ 5.74
   
 

        Unrecognized pre-tax expense of $2.4 million related to restricted stock awards is expected to be recognized over the weighted average remaining service period of 3.4 years for awards outstanding at December 31, 2007.

        Stock option activity for the years ended December 31, 2007, 2006 and 2005, was as follows:

 
  Shares Subject to Options
  Weighted Average Option Price
  Weighted Average Remaining Contractual Term (Yrs)
  Aggregate Intrinsic Value
($'s in 000's)

Outstanding, December 31, 2004   3,779,245   $ 6.39          
  Granted   18,250     3.83          
  Exercised   (124,121 )   3.04          
  Forfeited   (96,506 )   6.95          
   
 
         
Outstanding, December 31, 2005   3,576,868     6.43          
  Granted   696,250     5.23          
  Exercised   (290,224 )   4.57          
  Forfeited   (311,469 )   7.55          
   
 
         
Outstanding, December 31, 2006   3,671,425     6.25          
  Granted   1,308,679     8.06          
  Exercised   (501,051 )   5.10          
  Forfeited   (55,341 )   10.04          
   
 
 
 
Outstanding, December 31, 2007   4,423,712   $ 6.87   4.6   $ 29,216
   
 
 
 
Exercisable at December 31, 2007   2,511,174   $ 6.78   4.0   $ 17,135
   
 
 
 

95


        The following table summarizes information about stock options outstanding and exercisable at December 31, 2007:

 
  Options Outstanding
  Options Exercisable
Range of Exercise Prices

  Number Outstanding
  Weighted Average Remaining Contractual Term (Yrs)
  Weighted Average Exercise Price
  Aggregate Intrinsic Value
($'s in 000's)

  Number Exercisable
  Weighted Average Exercise Price
  Aggregate Intrinsic Value
($'s in 000's)

$2.12 to $4.00   684,485   3.8   $ 3.20   $ 6,912   572,717   $ 3.18   $ 5,797
$4.01 to $6.00   1,575,854   4.5     5.17     12,805   1,036,497     5.14     8,457
$6.01 to $10.00   1,580,769   7.1     7.69     8,882   366,814     6.82     2,377
$10.01 to $13.00   262,604   4.3     10.95     617   215,146     10.96     504
$13.01 and above   320,000   3.3     15.64       320,000     15.64    
   
           
 
       
    4,423,712   4.6   $ 6.87   $ 29,216   2,511,174   $ 6.78   $ 17,135
   
           
 
       

        The intrinsic values above are based on the Company's closing stock price of $13.30 on December 31, 2007. The weighted-average grant-date fair value of options granted during the year ended December 31, 2007, was $5.94. Unrecognized pre-tax expense of $8.5 million related to stock options is expected to be recognized over the weighted average remaining service period of 2.7 years for awards outstanding at December 31, 2007.

        The Company did not record any compensation expense during the years ended December 31, 2007 and 2006, for stock options granted to non-employees. During the year ended December 31, 2005, the Company recorded compensation expense of $27,500 for stock options granted to non-employees. Compensation expense is amortized on a straight-line basis over the underlying vesting terms. The fair value of each option granted was estimated on the date of grant using the Black-Scholes option-pricing model.

Accelerated Vesting of Unvested Stock Options

        On October 3, 2005, the Compensation Committee of the Board of Directors of the Company approved the acceleration of vesting of all unvested options to purchase shares of common stock of the Company that were held by current employees, officers and directors of the Company, which had an exercise price per share equal to or greater than $4.64 (the closing market price of the Company's common stock on October 3, 2005). The primary purpose of the accelerated vesting is to enable us to avoid recognizing, in our income statement, non-cash compensation expense associated with these options upon the adoption of SFAS No. 123(R) as of January 1, 2006. Options to purchase 857,923 shares of common stock were subject to this acceleration. Because these options had exercise prices in excess of current market values, or are "underwater," they were not fully achieving their original objectives of incentive compensation and employee retention. The Company believes that the acceleration of these underwater options may have a positive effect on employee morale and retention. Under the accounting for stock options in accordance with Accounting Principles Board Opinion No. 25 Accounting for Stock Issued to Employees, and FASB Interpretation No. 44 Accounting for Certain Transactions Involving Stock Compensation, the acceleration of the vesting of these options did not result in a compensation charge because the exercise prices of the affected options, which have not been modified, was greater than the closing price of the Company's common stock on the date the event occurred. The Company has estimated the pre-tax charge to be eliminated from future accounting periods was approximately $3.7 million.

96


Note 16—Business Segment Information

        SFAS No. 131, Disclosures about Segments of an Enterprise and Related Information, establishes standards for reporting information about operating segments in annual financial statements of public business enterprises. It also establishes standards for related disclosures about products and service, geographic areas and major customers. The Company evaluated its business activities that are regularly reviewed by the Chief Executive Officer and for which discrete financial information is available. As a result of this evaluation, the Company determined that each of its subsidiaries, Bruker Daltonics, Bruker AXS, and Bruker Optics, is a reportable operating segment.

        Bruker AXS is in the business of manufacturing and distributing advanced X-ray and OES-spark instrumentation used in non-destructive molecular and elemental analysis in academic, research and industrial applications. Bruker Daltonics is in the business of manufacturing and distributing mass spectrometry instruments that can be integrated and used along with other analytical instruments. Bruker Optics is a leading developer and provider of research, analytical and process analysis instruments and solutions based on infrared and Raman molecular spectroscopy technologies. Bruker Corporation, the parent company of Bruker Daltonics, Bruker AXS and Bruker Optics, is the corporate entity that holds excess cash and short-term investments and incurs certain public company costs.

        Selected business segment information for the years ended December 31, 2007, 2006 and 2005, is presented below (in thousands):

 
  Revenue
  Operating Income (Loss)
 
 
  2007
  2006
  2005
  2007
  2006
  2005
 
Bruker AXS   $ 243,987   $ 179,502   $ 137,357   $ 26,015   $ 10,256   $ 1,059  
Bruker Daltonics     188,604     159,744     161,355     14,042     10,000     12,430  
Bruker Optics     122,493     105,530     78,701     18,276     17,944     12,035  
Corporate                 (7,885 )   (7,612 )   (2,851 )
Eliminations     (7,508 )   (8,942 )   (5,160 )   (481 )   74     (251 )
   
 
 
 
 
 
 
  Total   $ 547,576   $ 435,834   $ 372,253   $ 49,967   $ 30,662   $ 22,422  
   
 
 
 
 
 
 

        Total assets, capital expenditures and depreciation and amortization by segment for the years ended December 31, 2007, 2006 and 2005, are as follows (in thousands):

 
  Assets
  Capital Expenditures
  Depreciation and Amortization
 
  2007
  2006
  2005
  2007
  2006
  2005
  2007
  2006
  2005
Bruker AXS   $ 220,730   $ 170,610   $ 129,113   $ 4,606   $ 3,990   $ 1,590   $ 4,532   $ 6,194   $ 3,583
Bruker Daltonics     244,706     274,423     189,790     2,169     2,355     1,622     5,047     4,926     5,025
Bruker Optics     119,466     86,726     64,592     9,304     1,278     1,579     3,049     2,169     1,898
Corporate     314,988     316,985     235,529                        
Eliminations     (346,677 )   (415,557 )   (195,382 )                      
   
 
 
 
 
 
 
 
 
  Total   $ 553,213   $ 433,187   $ 423,642   $ 16,079   $ 7,623   $ 4,791   $ 12,628   $ 13,289   $ 10,506
   
 
 
 
 
 
 
 
 

97


        Revenue and long-lived assets by geographical area as of and for the years ended December 31, 2007, 2006 and 2005, is as follows (in thousands):

 
  Revenue
 
  2007
  2006
  2005
North America   $ 130,407   $ 107,454   $ 92,548
Germany     208,799     162,994     153,012
Japan     42,226     44,311     45,546
Other     166,144     121,075     81,147
   
 
 
  Total   $ 547,576   $ 435,834   $ 372,253
   
 
 
 
 
  Long-Lived Assets
 
  2007
  2006
North America   $ 19,912   $ 19,280
Germany     77,709     65,986
Japan     1,224     1,227
Other     4,255     3,856
   
 
  Total   $ 103,100   $ 90,349
   
 

        Other locations include primarily France, United Kingdom, The Netherlands, Sweden, Italy, Poland, Switzerland and Hong Kong.

Note 17—Interest and Other Income (Expense), Net

        The components of interest and other income (expense), net for the years ended December 31, 2007, 2006 and 2005, were as follows (in thousands):

 
  2007
  2006
  2005
 
Interest income   $ 1,337   $ 2,183   $ 2,566  
Interest expense     (1,834 )   (2,159 )   (2,059 )
Exchange gains (losses) on foreign currency transactions     (2,096 )   (1,613 )   1,308  
Appreciation (depreciation) of the fair value of derivative financial instruments     725     4,714     (2,675 )
Loss on disposal of equipment     (117 )   202      
Rental income     211     247     150  
Commission income     125          
Insurance income     56     21     44  
Other expense     238     163     (114 )
   
 
 
 
Interest and other income (expense), net   $ (1,355 ) $ 3,758   $ (780 )
   
 
 
 

Note 18—Related Parties

        Prior to the acquisition of the Bruker BioSpin Group on February 26, 2008, we were affiliated, through common shareholders, with several other entities which use the Bruker name. A sharing agreement with certain of these affiliates provides for the sharing of specified intellectual property rights, services, facilities and other related items.

        As of December 31, 2007 and 2006, the Company had payables to related parties of $8.3 million and $5.9 million, respectively. As of December 31, 2007 and 2006, we had receivables from related

98



parties of $7.2 million and $9.0 million, respectively. Payment terms on balances with related parties are similar as those with third party customers.

        Sales to related parties which are not subsidiaries of the Company are included as revenues in the consolidated financial statements. These related parties maintain sales offices in countries in which we do not have our own distribution network. As such, these sales were primarily for resale of our products only. These sales amounted to $14.5 million, $11.3 million and $13.0 million for the years ended December 31, 2007, 2006 and 2005, respectively. In addition, the Company purchased products and services which amounted to $24.0 million, $21.1 million and $17.0 million from affiliated entities in the years ended December 31, 2007, 2006 and 2005, respectively.

        The Company shares various general and administrative expenses for items including umbrella insurance policies, accounting services and leases with various related parties. These general and administrative expenses amounted to $5.1 million, $3.7 million and $2.8 million for the years ended December 31, 2007, 2006 and 2005, respectively.

        During the years ended December 31, 2007, 2006 and 2005, the Company paid $1.3 million, $1.3 million and $0.5 million, respectively, to a law firm in which one of our directors is a partner.

        During the years ended December 31, 2007, 2006 and 2005, the Company paid $0.1 million in each year to a financial services firm in which one of our directors is a partner.

        Bruker Optics rents various office space from a principal stockholder under lease agreements. During each of the years ended December 31, 2007, 2006 and 2005, this stockholder was paid approximately $0.4 million, $0.3 million and $0.3 million, respectively, which was estimated to be equal to the fair market value less the cost of capital improvements provided by Bruker Optics in 2004. Bruker Optics subleased a portion of this office space to an affiliate during 2007, 2006 and 2005, and received rental income, which includes charges for utilities and other occupancy costs, of $31,500 for each period. This rental income is recorded as a reduction of rent, utilities and building maintenance expenses.

Note 19—Recent Accounting Pronouncements

        In December 2007, the FASB issued SFAS No. 141(R), Business Combinations ("SFAS No. 141(R)"). This statement will significantly change the accounting for business combinations. Under SFAS No. 141(R), an acquiring entity will be required to recognize all of the assets acquired and liabilities assumed in a transaction at the acquisition date fair value with certain limited exceptions. In addition, SFAS No. 141(R) will change the accounting treatment for acquisition costs, in-process research and development, restructuring costs associated with business combinations and changes in deferred tax asset valuation allowances and income tax uncertainties after the acquisition date. SFAS No. 141(R) also includes a significant number of new disclosure requirements. Early adoption of SFAS No. 141(R) is prohibited and the Company will be required to apply SFAS No. 141(R) to acquisitions that occur on or after January 1, 2009.

        In December 2007, the FASB issued SFAS No. 160, Noncontrolling Interests in Consolidated Financial Statements—An Amendment of ARB No. 51 ("SFAS No. 160"). This statement establishes new accounting and reporting standards for the minority interest in a subsidiary and the deconsolidation of a subsidiary. SFAS No. 160 is effective as of the beginning of fiscal 2009 and early adoption is prohibited. The Company has not yet assessed the effect, if any, that adoption of SFAS No. 160 will have on its results of operations and financial position.

        In February 2007, the FASB issued SFAS No. 159, The Fair Value Option for Financial Assets and Liabilities, Including an amendment of FASB Statement No. 115 ("SFAS No. 159"). This Statement permits entities to choose to measure many financial instruments and certain other items at fair value that are not currently required to be measured at fair value. SFAS No. 159 is effective as of the

99



beginning of fiscal 2008. The Company does not expect that adoption of SFAS No. 159 will have a material impact on our results of operations or financial position.

        In September 2006, the FASB issued SFAS No. 157, Fair Value Measurements ("SFAS No. 157"). This Statement is effective for financial statements issued for fiscal years beginning after November 15, 2007. In February 2008, the FASB issued FASB Staff Position 157-1, Application of FASB Statement No. 157 to FASB Statement No. 13 and Other Accounting Pronouncements that Address Fair Value Measurements for Purposes of Lease Classification or Measurement under Statement 13 ("FSP 157-1") and FASB Staff Position 157-2, Effective Date of FASB Statement No. 157 ("FSP 157-2"). FSP 157-2 defers the effective date in SFAS No. 157 until fiscal years beginning after November 15, 2008, for certain nonfinancial assets and liabilities. SFAS No. 157 provides a common fair value hierarchy for companies to follow in determining fair value measurements in the preparation of financial statements and expands disclosure requirements relating to how such fair value measurements were developed. SFAS No. 157 clarifies the principle that fair value should be based on the assumptions that the marketplace would use when pricing an asset or liability, rather than company specific data. The Company is currently assessing the impact that SFAS No. 157 will have on its results of operations and financial position.

Note 20—Quarterly Financial Data (Unaudited)

        The Company's common stock is trading under the symbol BRKR. A summary of operating results for the quarterly periods in the two years ended December 31, 2007 and 2006, is set forth below (in thousands, except per share data):

 
  Quarter Ended
 
  March 31
  June 30
  September 30
  December 31
Year ended December 31, 2007                        
Net revenue   $ 110,507   $ 121,683   $ 131,643   $ 183,743
Gross profit     52,628     53,031     61,833     85,646
Operating income     7,759     7,029     11,457     23,722
Net income     3,881     4,965     8,664     14,019
Net income per share—basic and diluted   $ 0.04   $ 0.05   $ 0.08   $ 0.13

Year ended December 31, 2006

 

 

 

 

 

 

 

 

 

 

 

 
Net revenue   $ 94,856   $ 100,483   $ 104,870   $ 135,625
Gross profit     43,756     46,223     46,183     63,172
Operating income     4,866     2,874     6,984     15,938
Net income     3,259     2,538     2,976     9,708
Net income per share—basic   $ 0.03   $ 0.03   $ 0.03   $ 0.10
Net income per share—diluted   $ 0.03   $ 0.02   $ 0.03   $ 0.09

Note 21—Subsequent Events

        On February 26, 2008, the Company completed the acquisition of all of the outstanding capital stock of the Bruker BioSpin Group in accordance with the terms of various stock purchase agreements dated as of December 2, 2007. At the completion of this acquisition, the Company paid an aggregate of $914.0 million of consideration to the shareholders of the Bruker BioSpin Group, which was financed with 57,544,872 shares of unregistered common stock valued at $526.0 million, $351.0 million of cash obtained under a new credit facility and the balance with cash on hand. The value of the shares of common stock issued in connection with the merger was determined using a trailing average of the closing market prices of the Company's stock for a period of ten consecutive trading days ending two days prior to the signing of the various stock purchase agreements. Under the stock purchase agreements, $98.8 million of the purchase price was paid into escrow accounts pending the resolution

100



of indemnification obligations and working capital obligations of the sellers. The unused portion of the $92.0 million indemnity escrow will be released to the sellers at the later of (1) the 30th day following the receipt by the Company of combined audited financial statements of the Bruker BioSpin Group for the fiscal year ended December 31, 2008, or (2) the resolution of any claim for indemnification of which the sellers have received notice prior to the conclusion of the 30 day period described in (1) above. The unused portion of the $6.8 million working capital escrow will be released to the sellers within 25 business days following the receipt by the Company of combined audited financial statements of the Bruker BioSpin Group for the fiscal year ended December 31, 2007.

        In connection with the acquisition of the Bruker BioSpin Group, the Company entered into a five year Credit Agreement with a syndication of lenders that provided for a revolving credit line with a maximum commitment of $230.0 million and a term facility of $150.0 million. The outstanding principal under the term loan is payable in quarterly installments through December 2012. Borrowings under the Credit Agreement bear interest, at the Company's option, at either (i) the higher of the prime rate or the federal funds rate plus 0.50%, or (ii) adjusted LIBOR, plus margins ranging from 0.40% to 1.25% and a facility fee ranging from 0.10% to 0.20%.

        Borrowings under the Credit Agreement are secured by the pledge to the banks of 100% of the capital stock of each of the Company's wholly-owned domestic subsidiaries and 65% of the capital stock of certain of the Company's direct or indirect wholly-owned foreign subsidiaries. The Credit Agreement also requires the Company to maintain certain financial ratios related to maximum leverage and minimum interest coverage ratios as defined in the Credit Agreement. In addition to the financial ratios, the Credit Agreement restricts, among other things, the Company's ability to do the following: make certain payments; incur additional debt; incur certain liens; make certain investments, including derivative agreements; merge, consolidate, sell or transfer all or substantially all of the Company's assets; and enter into certain transactions with affiliates.

        The acquisition of the Bruker BioSpin Group represented a combination of companies under common control due to the majority ownership of both companies by six related individuals as an affiliated shareholder group. As a result, the acquisition of the Bruker BioSpin Group will be accounted for at historical carrying values. After the closing of the transaction all historical consolidated balance sheets, statements of operations, statements of cash flows and notes to the consolidated financial statements in future filings with the Securities and Exchange Commission, beginning with the Company's Quarterly Report on Form 10-Q for the quarter ending March 31, 2008, will be restated by combining the historical consolidated financial statements of Bruker Corporation with those of the Bruker BioSpin Group.

        The following unaudited pro forma condensed combined balance sheet and statements of operations were prepared by combining the historical consolidated financial statements of Bruker Corporation with those of the Bruker BioSpin Group. These financial statements include pro forma adjustments reflecting the consideration paid to the shareholders of the Bruker BioSpin Group on February 26, 2008, but do not include certain other pro forma adjustments, including interest expense that will be incurred under the Credit Agreement. These unaudited pro forma condensed financial statements should be read in conjunction with the historical consolidated financial statements and related notes of Bruker Corporation.

101



BRUKER CORPORATION
INCLUDING THE HISTORICAL RESULTS OF THE BRUKER BIOSPIN GROUP
PRO FORMA CONDENSED CONSOLIDATED BALANCE SHEETS
(in thousands)

 
  December 31,
2007

 
 
  (unaudited)

 
ASSETS        
Current assets:        
  Cash and cash equivalents   $ 295,368  
  Short-term investments     12,136  
  Accounts receivable, net     185,217  
  Inventories     447,688  
  Other current assets     57,288  
   
 
    Total current assets     997,697  
  Property, plant and equipment     207,588  
  Intangibles and other assets     69,346  
   
 
    Total assets   $ 1,274,631  
   
 

LIABILITIES AND SHAREHOLDERS' EQUITY

 

 

 

 
Current liabilities:        
  Short-term borrowings   $ 241,471  
  Accounts payable     52,293  
  Customer advances     233,466  
  Other current liabilities     240,586  
   
 
    Total current liabilities     767,816  
 
Long-term debt

 

 

150,769

 
  Other long-term liabilities     108,194  

Shareholders' equity:

 

 

 

 
  Common stock     1,624  
  Additional paid-in capital     308,893  
  Retained earnings     (211,146 )
  Accumulated other comprehensive income     148,481  
   
 
    Total shareholders' equity     247,852  
   
 
    Total liabilities and shareholders' equity   $ 1,274,631  
   
 

102



BRUKER CORPORATION
INCLUDING THE HISTORICAL RESULTS OF THE BRUKER BIOSPIN GROUP
PRO FORMA CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(in thousands, except per share data)

 
  Year Ended December 31,
 
 
  2007
  2006
  2005
 
 
   
  (unaudited)

   
 
Product revenue   $ 913,238   $ 758,352   $ 702,322  
Service revenue     115,419     87,873     76,841  
Other revenue     3,791     4,602     8,683  
   
 
 
 
    Total revenue     1,032,448     851,007     787,846  
Cost of product revenue     489,246     399,182     380,030  
Cost of service revenue     73,591     53,207     49,811  
   
 
 
 
    Total cost of revenue     562,837     452,389     429,841  
   
 
 
 
    Gross profit     469,611     398,618     358,005  

Operating expenses:

 

 

 

 

 

 

 

 

 

 
Sales and marketing     156,783     131,393     115,634  
General and administrative     59,600     51,863     49,396  
Research and development     110,751     102,611     102,678  
Acquisition related charges     7,412     5,724      
Special credit             (25,754 )
   
 
 
 
    Total operating expenses     334,546     291,581     241,954  
   
 
 
 
      Operating income     135,065     107,037     116,051  
Interest and other income (expense), net     5,750     4,716     7,223  
   
 
 
 
Income before provision for income taxes and minority interest in consolidated subsidiaries     140,815     111,753     123,274  
Provision for income taxes     43,278     36,927     36,927  
   
 
 
 
Income before minority interest in consolidated subsidiaries     97,537     74,826     74,826  
Minority interest in consolidated subsidiaries     299     8     40  
   
 
 
 
Net income   $ 97,238   $ 74,818   $ 84,850  
   
 
 
 
Net income per share:                    
  Basic   $ 0.60   $ 0.47   $ 0.54  
  Diluted   $ 0.59   $ 0.47   $ 0.53  
Weighted average common shares outstanding:                    
  Basic     161,247     159,057     158,368  
  Diluted     164,314     160,106     158,675  

103


ITEM 9.    CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

        None.

ITEM 9A.    CONTROLS AND PROCEDURES

Disclosure Controls and Procedures

        We have established disclosure controls and procedures that are designed to ensure that material information relating to us, including our consolidated subsidiaries, is made known to our Chief Executive Officer (principal executive officer) and Chief Financial Officer (principal financial officer) by others within our organization. Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our disclosure controls and procedures as of December 31, 2007. Based on this evaluation our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were effective as of December 31, 2007, to ensure that the information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the SEC's rules and forms.

Management's Report on Internal Control over Financial Reporting

        Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2007, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this evaluation, our management has concluded that our internal control over financial reporting was effective as of December 31, 2007.

        Our audited consolidated financial statements include the results of Analys-Konsult AB. Upon consideration of the date of the acquisition and the time constraints under which our management's assessment would have to be made, management determined that it would not be possible to conduct a sufficiently comprehensive assessment of the acquired business' controls over financial reporting. Accordingly, these operations have been excluded from the scope of management's assessment of internal controls. Our consolidated sales for the year ended December 31, 2007, were $547.6 million, of which Analys-Konsult AB represented $5.3 million. Our total assets as of December 31, 2007, were $553.2 million, of which Analys-Konsult AB represented $5.5 million, including $0.5 million of intangible assets and goodwill resulting from the acquisitions.

        The attestation report issued by Ernst & Young LLP, our independent registered public accounting firm, on our internal control over financial reporting is included herein.

Changes in Internal Control over Financial Reporting

        There were no changes in our internal control over financial reporting that occurred during the quarter ended December 31, 2007, that materially affected, or are reasonably likely to affect, our internal control over financial reporting.

104



Report of Independent Registered Public Accounting Firm on Internal Control over Financial Reporting


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Shareholders of
Bruker Corporation

        We have audited Bruker Corporation's internal control over financial reporting as of December 31, 2007, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Bruker Corporation's management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the company's internal control over financial reporting based on our audit.

        We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

        A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

        Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

        As indicated in the accompanying Management's Report on Internal Control over Financial Reporting, management's assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of Analys-Konsult AB, which is included in the 2007 consolidated financial statements of Bruker Corporation and constituted $5,500,000 and $1,000,000 of total and net assets, respectively, as of December 31, 2007 and $5,300,000 and $160,000 of revenues and net income, respectively, for the year then ended. Our audit of internal control over financial reporting of Bruker Corporation also did not include an evaluation of the internal control over financial reporting of Analys-Konsult AB.

        In our opinion, Bruker Corporation maintained, in all material respects, effective internal control over financial reporting as of December 31, 2007, based on the COSO criteria.

105


        We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Bruker Corporation as of December 31, 2007 and 2006, and the related consolidated statements of operations, shareholders' equity and comprehensive income (loss), and cash flows for each of the three years in the period ended December 31, 2007 of Bruker Corporation and our report dated March 14, 2008, expressed an unqualified opinion thereon.

    /s/ ERNST & YOUNG LLP
Boston, Massachusetts
March 14, 2008
   

ITEM 9B.    OTHER INFORMATION

        None.

106



PART III

        In accordance with General Instruction G(3) to Form 10-K, except as set forth below, the information called for by Items 10, 11, 12, 13 and 14 is incorporated by reference from the registrant's definitive proxy statement for the Annual Meeting of Stockholders to be held on May 8, 2008.

ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

        A copy of the Company's code of ethics, which applies to its principal executive officer, principal financial officer, principal accounting officer, controller and board of directors may be obtained free of charge by requesting them from us in writing or by telephone at Bruker Corporation, 40 Manning Road, Billerica, Massachusetts, 01821, Attn: Investor Relations. (978) 663-3660, ext. 1411.

        The additional information required by this Item 10 pursuant to Items 401, 405 and 407(c)(3), (d)(4) and (d)(5) of Regulation S-K is contained in the proxy statement for our annual meeting of stockholders to be held on May 8, 2008, and is incorporated in this annual report on Form 10-K by reference.

ITEM 11.    EXECUTIVE COMPENSATION

        The information required to be disclosed by this Item 11 pursuant to Items 402 and 407(e)(4) and (e)(5) of Regulation S-K is contained in the proxy statement for our annual meeting of stockholders to be held on May 8, 2008, under the captions "Summary of Executive Compensation," "Compensation Committee Interlocks and Insider Participation" and "Compensation Committee Report," respectively, and is incorporated in this annual report on Form 10-K by reference.

ITEM 12.    SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Equity Compensation Plans

        The following table summarizes information about our equity compensation plans as of December 31, 2007.

Plan Category

  Number of securities
to be issued
upon exercise of
outstanding options,
warrants and rights

  Weighted-average
exerise price of
outstanding options,
warrants and rights

  Number of securities
remaining available
for future issuance
under equity
compensation
plans (excluding
securities
reflected in column
(a))

Equity compensation plans approved by security holders   4,993,114   $ 6.74   3,006,886
Equity compensation plans not approved by security holders   N/A     N/A   N/A
   
 
 
Total   4,993,114   $ 6.74   3,006,886
   
 
 

        The additional information required by this Item 12 pursuant to Items 403 of Regulation S-K is contained in the proxy statement for our annual meeting of stockholders to be held on May 8, 2008, under the caption "Security Ownership of Certain Beneficial Owners and Management" and is incorporated in this annual report on Form 10-K by reference.

107



ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

        The information required to be disclosed by this Item 13 pursuant to Items 404 and 407(a) of Regulation S-K is contained in the proxy statement for our annual meeting of stockholders to be held on May 8, 2008, under the captions "Certain Relationships and Related Transactions" and "Board Composition, Meetings and Committees" and is incorporated in this annual report on Form 10-K by reference.'

ITEM 14.    PRINCIPAL ACCOUNTING FEES AND SERVICES

        The information required to be disclosed by this Item 14 pursuant to Item 9(e) of Schedule 14A is contained in the proxy statement for our annual meeting of stockholders to be held on May 8, 2008, under the caption "Report of the Audit Committee" and is incorporated in this annual report on Form 10-K by reference.

108



PART IV

ITEM 15.    EXHIBITS, FINANCIAL STATEMENTS AND SCHEDULES

        The following consolidated financial statements of Bruker Corporation are filed as part of this report under Item 8.—Financial Statements and Supplementary Data

Reports of Independent Registered Public Accounting Firm
Consolidated Balance Sheets as of December 31, 2007 and 2006
Consolidated Statements of Operations for the years ended December 31, 2007, 2006 and 2005
Consolidated Statements of Shareholders' Equity and Comprehensive Income (Loss) for the years ended December 31, 2007, 2006 and 2005
Consolidated Statements of Cash Flows for the years ended December 31, 2007, 2006 and 2005
Notes to Consolidated Financial Statements

Schedule II—Valuation and Qualifying Accounts    

 
   
   
  Incorporated by Reference **
Exhibit No.

   
  Filed Herewith
  Description
  Form
  Date
2.1   Share Transfer Deed dated as of August 13, 2005       8-K   August 16, 2005

2.2*

 

Purchase and Transfer Agreement for Shares in Röntec AG dated October 10, 2005 between Bruker AXS GmbH and the Sellers as defined therein

 

 

 

10-Q

 

September 30, 2005

2.3*

 

Asset Purchase Agreement dated October 21, 2005 between Bruker AXS Inc., Princeton Gamma-Tech Instruments, Inc., Princeton Gamma-Tech (UK), Ltd., Finn-Partners, Inc. and Third Letter Corporation

 

 

 

10-Q

 

September 30, 2005

2.4

 

Stock Purchase Agreement, dated April 17, 2006, by and among Bruker BioSciences Corporation, Bruker Optics Inc. and the stockholders of Bruker Optics Inc.

 

 

 

8-K

 

April 18, 2006

2.5*

 

Stock Purchase Agreement, dated as of July 18, 2006, by and among Bruker AXS Inc., KeyMaster Technologies, Inc., and the stockholders of KeyMaster Technologies, Inc.

 

 

 

10-Q

 

June 30, 2006

2.6*

 

Share Purchase & Transfer Agreement, dated as of September 8, 2006, between Bruker AXS, Quantron GmbH and the stockholders of Quantron

 

 

 

10-Q

 

September 30, 2006

109



2.7

 

U.S. Stock Purchase Agreement, dated December 2, 2007, by and among the Registrant, Bruker BioSpin Inc. and the stockholders of Bruker BioSpin Inc.

 

 

 

8-K

 

December 3, 2007

2.8

 

German Share Purchase Agreement, dated December 2, 2007, by and among the Registrant, Bruker Physik GmbH, Techneon AG and the shareholders of Bruker Physik GmbH

 

 

 

8-K

 

December 3, 2007

2.9

 

Agreement and Plan of Merger dated as of December 2, 2007 by and among the Registrant, Bruker BioSpin Invest AG, Bruker BioSpin Beteiligungs AG and the shareholders of Bruker BioSpin Invest AG

 

 

 

8-K

 

December 3, 2007

3.1

 

Amended Certificate of Incorporation of the Registrant

 

X

 

 

 

 

3.2

 

Bylaws of the Registrant

 

 

 

S-1

 

August 3, 2000

4.1

 

Specimen stock certificate representing shares of common stock of the Registrant

 

 

 

S-3

 

April 22, 2004

10.1

 

Amended and Restated 2000 Stock Option Plan

 

 

 

S-4

 

May 19, 2003

10.2

 

Sharing Agreement dated as of February 28, 2000 among the Registrant and 13 affiliates of the Registrant

 

 

 

S-1

 

August 3, 2000

10.3*

 

License Agreement dated August 10, 1998 between the Registrant and Indiana University's Advanced Research & Technology Institute

 

 

 

S-1

 

August 3, 2000

10.4*

 

ITMS Collaboration Agreement by and between Hewlett-Packard, the Registrant and Bruker Daltonik GmbH, dated April 28, 1999

 

 

 

S-1

 

August 3, 2000

10.5*

 

Collaboration Agreement dated December 4, 1997 between Bruker-Franzen Analytik GmbH and Sequenom Instruments GmbH

 

 

 

S-1

 

August 3, 2000

10.6*

 

Agreement by and between the Bruker Daltonik GmbH, Bruker Saxonia Analytik GmbH and Bruker Optik GmbH dated March 31, 2000

 

 

 

S-1

 

August 3, 2000

10.10*

 

Supply Agreement dated March 30, 1998 between the Registrant and Fairchild Imaging Inc., formerly known as Lockheed Martin Fairchild Systems

 

 

 

S-1

 

December 13, 2001

10.11*

 

Contract dated October 1, 1998 between Bruker AXS GmbH and GKSS Forschungszentrum Geesthacht GmbH, as amended

 

 

 

S-1

 

December 13, 2001

110



10.12*

 

Contract dated July 31, 1997 between Bruker AXS GmbH and Siemens Aktiengesellschaft Berlin und Munchen Bereich Medizinische Technik

 

 

 

S-1

 

December 13, 2001

10.13*

 

Development Agreement (Agreement 99.06) dated May 5, 1999 between Bruker AXS GmbH and Baltic Scientific Instruments

 

 

 

S-1

 

December 13, 2001

10.14*

 

Development Agreement (Agreement 99.10) dated October 7, 1999 between Bruker AXS GmbH and Baltic Scientific Instruments

 

 

 

S-1

 

December 13, 2001

10.19*

 

Agreement on Development, Supply and Marketing dated August 2, 2001 between Bruker AXS GmbH and Siemens Medical Solutions Rontgenwerk Rudolstadt

 

 

 

S-1

 

December 13, 2001

10.21

 

Lease for Office Space in Delft, The Netherlands dated October 12, 2001 between Bruker Nonius B.V. and Van Haaren Beheer B.V.

 

 

 

S-1

 

December 13, 2001

10.22*

 

Memorandum of Agreement for Strategic Collaboration dated October 16, 2001 between the Registrant and Fairchild Imaging, Inc.

 

 

 

S-1

 

December 13, 2001

10.25

 

Employment Offer Letter dated as of September 25, 2004 from Bruker BioSciences Corporation to William J. Knight

 

 

 

8-K

 

October 12, 2004

10.26

 

Company's form of Incentive Stock Option Agreement

 

 

 

8-K

 

October 12, 2004

10.27*

 

Amendment to ITMS Collaboration Agreement and OEM Agreement between Agilent Technologies, Inc. and the Registrant, effective February 25, 2005

 

 

 

10-Q

 

March 31, 2005

10.28

 

Company's form of Restricted Stock Agreement

 

 

 

10-K/A

 

December 31, 2005

10.29

 

Compensation and Indemnification Agreement, dated April 18, 2006, by and among the Company, William A. Linton, M. Christopher Canavan, Jr., Taylor J. Crouch and Daniel S. Dross

 

 

 

8-K

 

April 18, 2006

10.30

 

Demand Promissory Note, dated as of July 5, 2006 in the amount of $40,000,000, payable to Citizens Bank of Massachusetts

 

 

 

8-K

 

July 7, 2006

10.31*

 

Exclusive Distribution Agreement dated January 1, 2002 between Bruker BioSpin GmbH and Bruker Optics Inc., as amended April 17, 2006

 

 

 

10-K

 

December 31, 2006

10.32

 

Compensation and Indemnification Agreement, dated December 2, 2007, by and among the Company, William Linton, Collin D'Silva and Richard Kniss

 

 

 

8-K

 

December 3, 2007

111



10.33

 

Credit Agreement dated as of February 26, 2008 among the Registrant, Bruker AXS GmbH, Bruker Daltonik GmbH, Bruker Optik GmbH, Bruker Physik GmbH, Bruker BioSpin Invest AG, Bruker BioSpin AG and Bruker BioSpin International AG, the other foreign subsidiary borrowers from time to time party thereto, the lenders from time to time party thereto, Citibank, N.A. as Syndication Agent, and RBS Citizens, National Association, Deutsche Bank AG and Dresdner Bank AG as Co-Documentation Agents, and JPMorgan Chase Bank, N.A., as Administrative Agent

 

 

 

8-K

 

February 27, 2008

21.1

 

Subsidiaries of the Registrant

 

X

 

 

 

 

23.1

 

Consent of Ernst & Young LLP, Independent Registered Public Accounting Firm

 

X

 

 

 

 

24.1

 

Power of attorney (included on signature page hereto)

 

X

 

 

 

 

31.1

 

Certification by Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

X

 

 

 

 

31.2

 

Certification by Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

X

 

 

 

 

32.1

 

Certification by Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

X

 

 

 

 

32.2

 

Certification by Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

X

 

 

 

 

*
Confidential treatment requested as to certain portions, which portions have been omitted and filed separately with the Commission.

**
In accordance with Rule 12b-32 under the Securities Exchange Act of 1934, as amended, reference is made to the documents previously filed with the Securities and Exchange Commission, which documents are hereby incorporated by reference. The dates listed for Forms 8-K are dates the respective forms were filed on, the dates listed for Forms 10-Q, Forms 10-K and Form 10-K/A are for the quarterly or annual period ended dates and the dates listed for Forms S-1, Forms S-3 and Forms S-4 are dates on which the Security and Exchange Commission declared them effective.

112


        Schedule II—Valuation and Qualifying Accounts (in thousands):

 
  Balance at Beginning of Period
  Additions Charged to Earnings
  Deductions Amounts Written Off
  Balance at End of Period
Allowance Deducted in Balance Sheet from the assets to which they apply:                        
For the year ended December 31, 2007                        
  Allowance for doubtful accounts   $ 2,410   $ 299   $ (819 ) $ 1,890
For the year ended December 31, 2006                        
  Allowance for doubtful accounts   $ 3,810   $ (368 ) $ (1,032 ) $ 2,410
For the year ended December 31, 2005                        
  Allowance for doubtful accounts   $ 2,988   $ 155   $ 667   $ 3,810

        All other schedules have been omitted since they are either not applicable, not required or the information is included elsewhere herein.

113



SIGNATURES

        Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

    BRUKER CORPORATION

Date: March 17, 2008

 

By:

/s/  
FRANK H. LAUKIEN, PH.D.      
Name: Frank H. Laukien, Ph.D.
Title:
President, Chief Executive Officer and Chairman

        We, the undersigned officers and directors of Bruker Corporation, hereby severally constitute and appoint Frank H. Laukien, Ph.D. to sign for us and in our names in the capacities indicated below, the report on Form 10-K filed herewith and any and all amendments to such report, and to file the same, with all exhibits thereto and other documents in connection therewith, in each case, with the Securities and Exchange Commission, and generally to do all such things in our names and on our behalf in our capacities consistent with the provisions of the Securities Act of 1934, as amended, and all requirements of the Securities and Exchange Commission.

        Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

Name
  Title
  Date

/s/  FRANK H. LAUKIEN, PH.D.      
Frank H. Laukien, Ph.D.

 

President, Chief Executive Officer and Chairman of the Board (Principal Executive Officer)

 

March 17, 2008

/s/  
WILLIAM J. KNIGHT      
William J. Knight

 

Chief Financial Officer (Principal Financial and Accounting Officer)

 

March 17, 2008

/s/  
DANIEL S. DROSS      
Daniel S. Dross

 

Director

 

March 17, 2008

/s/  
COLLIN D'SILVA      
Collin D'Silva

 

Director

 

March 17, 2008

/s/  
WOLF-DIETER EMMERICH, PH.D      
Wolf-Dieter Emmerich, Ph.D.

 

Director

 

March 17, 2008

/s/  
BRENDA J. FURLONG      
Brenda J. Furlong

 

Director

 

March 17, 2008

114




/s/  
TONY W. KELLER, PH.D.      
Tony W. Keller, Ph.D.


 


Director


 


March 17, 2008

/s/  
RICHARD D. KNISS      
Richard D. Kniss

 

Director

 

March 17, 2008

/s/  
DIRK D. LAUKIEN, PH.D      
Dirk D. Laukien, Ph.D.

 

Director

 

March 17, 2008

/s/  
JOERG C. LAUKIEN      
Joerg C. Laukien

 

Director

 

March 17, 2008

/s/  
WILLIAM A. LINTON      
William A. Linton

 

Director

 

March 17, 2008

/s/  
RICHARD A. PACKER      
Richard A. Packer

 

Director

 

March 17, 2008

/s/  
RICHARD M. STEIN      
Richard M. Stein

 

Director

 

March 17, 2008

/s/  
BERNHARD WANGLER      
Bernhard Wangler

 

Director

 

March 17, 2008

115